Opened 4 years ago

Closed 2 years ago

#1491 closed enhancement (fixed)

Support for Kingston SSDNow S200 (KINGSTON SS200S330G)

Reported by: tasossah Owned by: Christian Franke
Priority: minor Milestone: Release 7.4
Component: drivedb Version:
Keywords: ssd Cc:

Description

I have a Phison based Kingston S200 30GB that is not in drivedb.
Manually adding it to the database under the "Phison Driven SSDs" category produces valid results.

According to the datasheet, it uses a PS3108 controller.
https://www.kingston.com/datasheets/SS200S3_us.pdf

smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.4.0-73-generic] (local build)
Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Phison Driven SSDs
Device Model:     KINGSTON SS200S330G
Serial Number:    
Firmware Version: S8FM06.A
User Capacity:    30.016.659.456 bytes [30,0 GB]
Sector Size:      512 bytes logical/physical
Rotation Rate:    Solid State Device
Form Factor:      2.5 inches
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ATA8-ACS (minor revision not indicated)
SATA Version is:  SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is:    Wed May 19 21:01:42 2021 EEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00)	Offline data collection activity
					was never started.
					Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever 
					been run.
Total time to complete Offline 
data collection: 		(  255) seconds.
Offline data collection
capabilities: 			 (0x1b) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Suspend Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					No Conveyance Self-test supported.
					No Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   1) minutes.
Extended self-test routine
recommended polling time: 	 (   2) minutes.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000b   100   100   050    Pre-fail  Always       -       0
  2 Not_In_Use              0x0005   100   100   050    Pre-fail  Offline      -       0
  3 Not_In_Use              0x0007   100   100   050    Pre-fail  Always       -       0
  5 Retired_Block_Count     0x0013   100   100   050    Pre-fail  Always       -       0
  7 Not_In_Use              0x000b   100   100   050    Pre-fail  Always       -       0
  8 Not_In_Use              0x0005   100   100   050    Pre-fail  Offline      -       0
  9 Power_On_Hours          0x0012   100   100   000    Old_age   Always       -       3815
 10 Not_In_Use              0x0013   100   100   050    Pre-fail  Always       -       0
 12 Power_Cycle_Count       0x0012   100   100   000    Old_age   Always       -       2834
168 SATA_Phy_Error_Count    0x0012   100   100   000    Old_age   Always       -       0
170 Bad_Blk_Ct_Erl/Lat      0x0003   100   100   010    Pre-fail  Always       -       0/48
173 MaxAvgErase_Ct          0x0012   100   100   000    Old_age   Always       -       294 (Average 190)
175 Not_In_Use              0x0012   100   100   010    Old_age   Always       -       0
187 Reported_Uncorrect      0x0012   100   100   000    Old_age   Always       -       0
192 Unsafe_Shutdown_Count   0x0012   100   100   000    Old_age   Always       -       376
194 Temperature_Celsius     0x0023   033   033   000    Pre-fail  Always       -       33
196 Reallocated_Event_Count 0x0002   100   100   000    Old_age   Always       -       0
197 Not_In_Use              0x0032   100   100   000    Old_age   Always       -       0
199 SATA_CRC_Error_Count    0x000b   100   100   050    Pre-fail  Always       -       0
218 CRC_Error_Count         0x000b   100   100   050    Pre-fail  Always       -       0
233 Flash_Writes_GiB        0x000b   100   100   000    Pre-fail  Always       -       4703
240 Not_In_Use              0x0013   100   100   050    Pre-fail  Always       -       0
241 Lifetime_Writes_GiB     0x0012   100   100   000    Old_age   Always       -       4746
242 Lifetime_Reads_GiB      0x0012   100   100   000    Old_age   Always       -       9126
244 Average_Erase_Count     0x0002   100   100   050    Old_age   Always       -       190
245 Max_Erase_Count         0x0002   100   100   050    Old_age   Always       -       294
246 Total_Erase_Count       0x0002   100   100   050    Old_age   Always       -       1711526

Change History (4)

comment:1 by Christian Franke, 4 years ago

Keywords: ssd added
Milestone: Release 7.3
Summary: Support for Kingston SSDNow S200Support for Kingston SSDNow S200 (KINGSTON SS200S330G)

comment:2 by Christian Franke, 3 years ago

Milestone: Release 7.3unscheduled

comment:3 by Christian Franke, 2 years ago

Milestone: unscheduledRelease 7.4
Owner: set to Christian Franke
Status: newaccepted

comment:4 by Christian Franke, 2 years ago

Resolution: fixed
Status: acceptedclosed
Note: See TracTickets for help on using tickets.