#971 closed defect (invalid)
No SMART access to Seagate devices under Linux if UAS is used
| Reported by: | tgape | Owned by: | |
|---|---|---|---|
| Priority: | minor | Milestone: | |
| Component: | all | Version: | 6.6 |
| Keywords: | uas linux | Cc: |
Description (last modified by )
I have a 3 TB Seagate Expansion portable USB 3.0 hard disk:
https://usb-ids.gowdy.us/read/UD/0bc2/231a
, model should be STEA3000400 (as found in an XML file which came inside the hard disk when I bought it)
with the suffix SRD0NF1 I guess (from the sticker in the back of the hard disk)
With UAS enabled I can see info with -d scsi (-d sat{,12} doesn't work), but SMART info is not available:
# smartctl -d scsi -i /dev/sdb smartctl 6.6 2017-11-05 r4594 [x86_64-linux-4.14.15-1-ARCH] (local build) Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Vendor: Seagate Product: Expansion Revision: 0708 Compliance: SPC-4 User Capacity: 3,000,592,981,504 bytes [3.00 TB] Logical block size: 512 bytes Physical block size: 4096 bytes LU is fully provisioned Logical Unit id: 0xXXXXXXXX Serial number: XXXXXXXX Device type: disk Local Time is: Sun Jan 28 11:28:14 2018 WET SMART support is: Unavailable - device lacks SMART capability.
If I blacklist UAS, then I get from smartctl:
# smartctl -i /dev/sdb smartctl 6.6 2017-11-05 r4594 [x86_64-linux-4.14.15-1-ARCH] (local build) Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Seagate Barracuda 2.5 5400 Device Model: ST3000LM024-2AN17R Serial Number: XXXXXXXXX (Note from me: This serial number doesn't match the serial number retrieved with -d scsi and UAS enabled! The UAS enabled serial number is the correct one from the sticker.) LU WWN Device Id: X XXXXXX XXXXXXXXXX Firmware Version: 0001 User Capacity: 3,000,592,982,016 bytes [3.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5526 rpm Form Factor: 2.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-3 T13/2161-D revision 5 SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Sun Jan 28 11:26:13 2018 WET SMART support is: Available - device has SMART capability. SMART support is: Enabled
I wonder if it's possible to get SMART access without blacklisting UAS. I don't like the "very big device" messages I receive in dmesg and I guess the device will perform better with UAS enabled (Kernel 4.14.15-1 from Archlinux X86_64).
kern :info : [ +4.501957] usbcore: registered new interface driver usb-storage kern :info : [ +4.470776] usb 4-1.4: new high-speed USB device number 12 using ehci-pci kern :warn : [ +0.179453] usb 4-1.4: UAS is blacklisted for this device, using usb-storage instead kern :info : [ +0.000009] usb-storage 4-1.4:1.0: USB Mass Storage device detected kern :info : [ +0.000262] usb-storage 4-1.4:1.0: Quirks match for vid 0bc2 pid 231a: 800000 kern :info : [ +0.000134] scsi host7: usb-storage 4-1.4:1.0 kern :info : [ +0.574103] usbcore: registered new interface driver uas kern :notice: [ +0.437323] scsi 7:0:0:0: Direct-Access Seagate Expansion 0708 PQ: 0 ANSI: 6 kern :notice: [ +0.022529] sd 7:0:0:0: Attached scsi generic sg2 type 0 kern :notice: [ +4.367035] sd 7:0:0:0: [sdb] Very big device. Trying to use READ CAPACITY(16). kern :notice: [ +0.000439] sd 7:0:0:0: [sdb] 5860533167 512-byte logical blocks: (3.00 TB/2.73 TiB) kern :notice: [ +0.000017] sd 7:0:0:0: [sdb] 4096-byte physical blocks kern :notice: [ +0.001065] sd 7:0:0:0: [sdb] Write Protect is off kern :debug : [ +0.000006] sd 7:0:0:0: [sdb] Mode Sense: 47 00 00 08 kern :notice: [ +0.001162] sd 7:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA kern :notice: [ +0.001110] sd 7:0:0:0: [sdb] Very big device. Trying to use READ CAPACITY(16). kern :notice: [ +0.072621] sd 7:0:0:0: [sdb] Very big device. Trying to use READ CAPACITY(16). kern :notice: [ +0.002571] sd 7:0:0:0: [sdb] Attached SCSI disk
And just in case:
# lsusb -v -d 0bc2:231a
Bus 004 Device 010: ID 0bc2:231a Seagate RSS LLC Expansion Portable
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.10
bDeviceClass 0
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x0bc2 Seagate RSS LLC
idProduct 0x231a Expansion Portable
bcdDevice 7.08
iManufacturer 1 Seagate
iProduct 2 Expansion
iSerial 3 XXXXXXXX
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 85
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x80
(Bus Powered)
MaxPower 500mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 8 Mass Storage
bInterfaceSubClass 6 SCSI
bInterfaceProtocol 80 Bulk-Only
iInterface 0
Change History (23)
comment:1 by , 7 years ago
| Description: | modified (diff) |
|---|
comment:2 by , 7 years ago
| Keywords: | uas linux added |
|---|---|
| Milestone: | → undecided |
| Type: | defect → enhancement |
comment:3 by , 7 years ago
No kernel messages triggered in both cases.
With UAS:
# smartctl -q noserial -r ioctl,2 -d sat -i /dev/sdb smartctl 6.6 2017-11-05 r4594 [x86_64-linux-4.14.15-1-ARCH] (local build) Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org REPORT-IOCTL: Device=/dev/sdb Command=IDENTIFY DEVICE Input: FR=...., SC=0x01, LL=...., LM=...., LH=...., DEV=...., CMD=0xec IN >>>> do_scsi_cmnd_io: sg_io_ver=3 [ata pass-through(16): 85 08 0e 00 00 00 01 00 00 00 00 00 00 00 ec 00 ] scsi_status=0x2, sg_transport_status=0x0, sg_driver_status=0x8 sg_info=0x1 sg_duration=0 milliseconds resid=0 Incoming data, len=512 [only first 256 bytes shown]: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 40 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >>> Sense buffer, len=18: 00 70 00 05 00 00 00 00 0a 00 00 00 00 24 00 00 00 10 00 00 status=2: sense_key=5 asc=24 ascq=0 sat_device::ata_pass_through: scsi error: unsupported field in scsi command REPORT-IOCTL: Device=/dev/sdb Command=IDENTIFY DEVICE returned -1 errno=5 [scsi error unsupported field in scsi command] ===== [IDENTIFY DEVICE] DATA START (BASE-16) ===== 000-015: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 016-031: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 032-047: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 048-063: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 064-079: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 080-095: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 096-111: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 112-127: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 128-143: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 144-159: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 160-175: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 176-191: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 192-207: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 208-223: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 224-239: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 240-255: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 256-271: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 272-287: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 288-303: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 304-319: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 320-335: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 336-351: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 352-367: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 368-383: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 384-399: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 400-415: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 416-431: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 432-447: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 448-463: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 464-479: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 480-495: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 496-511: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| ===== [IDENTIFY DEVICE] DATA END (512 Bytes) ===== REPORT-IOCTL: Device=/dev/sdb Command=IDENTIFY PACKET DEVICE Input: FR=...., SC=0x01, LL=...., LM=...., LH=...., DEV=...., CMD=0xa1 IN >>>> do_scsi_cmnd_io: sg_io_ver=3 [ata pass-through(16): 85 08 0e 00 00 00 01 00 00 00 00 00 00 00 a1 00 ] scsi_status=0x2, sg_transport_status=0x0, sg_driver_status=0x8 sg_info=0x1 sg_duration=0 milliseconds resid=0 Incoming data, len=512 [only first 256 bytes shown]: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 40 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >>> Sense buffer, len=18: 00 70 00 05 00 00 00 00 0a 00 00 00 00 24 00 00 00 10 00 00 status=2: sense_key=5 asc=24 ascq=0 sat_device::ata_pass_through: scsi error: unsupported field in scsi command REPORT-IOCTL: Device=/dev/sdb Command=IDENTIFY PACKET DEVICE returned -1 errno=5 [scsi error unsupported field in scsi command] ===== [IDENTIFY PACKET DEVICE] DATA START (BASE-16) ===== 000-015: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 016-031: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 032-047: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 048-063: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 064-079: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 080-095: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 096-111: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 112-127: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 128-143: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 144-159: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 160-175: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 176-191: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 192-207: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 208-223: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 224-239: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 240-255: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 256-271: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 272-287: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 288-303: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 304-319: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 320-335: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 336-351: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 352-367: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 368-383: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 384-399: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 400-415: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 416-431: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 432-447: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 448-463: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 464-479: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 480-495: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 496-511: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| ===== [IDENTIFY PACKET DEVICE] DATA END (512 Bytes) ===== Read Device Identity failed: scsi error unsupported field in scsi command A mandatory SMART command failed: exiting. To continue, add one or more '-T permissive' options.
Without UAS:
# smartctl -q noserial -r ioctl,2 -d sat -i /dev/sdb :( smartctl 6.6 2017-11-05 r4594 [x86_64-linux-4.14.15-1-ARCH] (local build) Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org REPORT-IOCTL: Device=/dev/sdb Command=IDENTIFY DEVICE Input: FR=...., SC=0x01, LL=...., LM=...., LH=...., DEV=...., CMD=0xec IN >>>> do_scsi_cmnd_io: sg_io_ver=3 [ata pass-through(16): 85 08 0e 00 00 00 01 00 00 00 00 00 00 00 ec 00 ] scsi_status=0x0, sg_transport_status=0x0, sg_driver_status=0x0 sg_info=0x0 sg_duration=6 milliseconds resid=0 Incoming data, len=512 [only first 256 bytes shown]: 00 5a 0c ff 3f 37 c8 10 00 00 00 00 00 3f 00 00 00 10 00 00 00 00 20 20 20 20 20 20 20 20 20 20 20 20 20 58 58 58 58 58 58 58 58 00 00 00 00 00 00 30 30 30 31 30 20 20 20 20 54 53 30 33 30 30 4d 4c 32 30 40 2d 34 41 32 31 4e 52 37 20 20 20 20 20 20 20 20 50 20 20 20 20 20 20 20 20 20 20 20 20 20 20 10 80 60 00 40 00 2f 00 40 00 02 00 02 07 00 ff 3f 10 00 70 3f 00 10 fc fb 00 10 0c ff ff ff 0f 00 00 07 04 80 03 00 78 00 78 00 78 00 78 00 00 00 00 00 00 00 90 00 00 00 00 00 00 1f 00 0e 85 06 00 cc 00 00 00 a0 f0 07 6d 00 6b 34 69 7d 63 41 69 34 49 bc 63 41 b0 7f 00 fb 00 fb 00 80 80 fe ff 00 00 d0 d0 00 00 c0 00 00 00 00 00 00 00 00 b0 a3 50 5d 01 00 00 00 d0 00 00 00 00 03 60 00 00 00 00 00 00 00 00 00 00 e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 5c 40 f0 1c 40 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [Duration: 0.006s] REPORT-IOCTL: Device=/dev/sdb Command=IDENTIFY DEVICE returned 0 ===== [IDENTIFY DEVICE] DATA START (BASE-16) ===== 000-015: 5a 0c ff 3f 37 c8 10 00 00 00 00 00 3f 00 00 00 |Z..?7.......?...| 016-031: 00 00 00 00 58 58 58 58 58 58 58 58 58 58 58 58 |....XXXXXXXXXXXX| 032-047: 58 58 58 58 58 58 58 58 00 00 00 00 00 00 30 30 |XXXXXXXX......00| 048-063: 31 30 20 20 20 20 54 53 30 33 30 30 4d 4c 32 30 |10 TS0300ML20| 064-079: 2d 34 41 32 31 4e 52 37 20 20 20 20 20 20 20 20 |-4A21NR7 | 080-095: 20 20 20 20 20 20 20 20 20 20 20 20 20 20 10 80 | ..| 096-111: 00 40 00 2f 00 40 00 02 00 02 07 00 ff 3f 10 00 |.@./.@.......?..| 112-127: 3f 00 10 fc fb 00 10 0c ff ff ff 0f 00 00 07 04 |?...............| 128-143: 03 00 78 00 78 00 78 00 78 00 00 00 00 00 00 00 |..x.x.x.x.......| 144-159: 00 00 00 00 00 00 1f 00 0e 85 06 00 cc 00 00 00 |................| 160-175: f0 07 6d 00 6b 34 69 7d 63 41 69 34 49 bc 63 41 |..m.k4i}cAi4I.cA| 176-191: 7f 00 fb 00 fb 00 80 80 fe ff 00 00 d0 d0 00 00 |................| 192-207: 00 00 00 00 00 00 00 00 b0 a3 50 5d 01 00 00 00 |..........P]....| 208-223: 00 00 00 00 03 60 00 00 00 00 00 00 00 00 00 00 |.....`..........| 224-239: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 5c 40 |..............\@| 240-255: 1c 40 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |.@..............| 256-271: 21 00 b0 a3 50 5d b0 a3 50 5d 20 20 02 00 40 01 |!...P]..P] ..@.| 272-287: 00 01 00 50 06 3c 0a 3c 00 00 3c 00 00 00 08 00 |...P.<.<..<.....| 288-303: 00 00 00 00 ff bd 80 02 00 00 00 00 08 00 00 00 |................| 304-319: 00 00 07 08 00 00 02 80 00 00 00 01 00 a1 00 80 |................| 320-335: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 336-351: 03 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 352-367: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 368-383: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 384-399: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 400-415: 00 00 00 00 00 00 00 00 00 00 00 00 a5 30 00 00 |.............0..| 416-431: 00 00 00 40 00 00 00 00 00 00 00 00 00 00 00 00 |...@............| 432-447: 00 00 96 15 00 00 00 00 00 00 00 00 7f 10 00 00 |................| 448-463: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 464-479: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 480-495: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 496-511: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a5 82 |................| ===== [IDENTIFY DEVICE] DATA END (512 Bytes) ===== === START OF INFORMATION SECTION === Model Family: Seagate Barracuda 2.5 5400 Device Model: ST3000LM024-2AN17R Firmware Version: 0001 User Capacity: 3,000,592,982,016 bytes [3.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5526 rpm Form Factor: 2.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-3 T13/2161-D revision 5 SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Mon Jan 29 19:02:11 2018 WET SMART support is: Available - device has SMART capability. SMART support is: Enabled
comment:4 by , 7 years ago
>>> Sense buffer, len=18: 00 70 00 05 00 00 00 00 0a 00 00 00 00 24 00 00 00 10 00 00 status=2: sense_key=5 asc=24 ascq=0 sat_device::ata_pass_through: scsi error: unsupported field in scsi command
Sense KEY 0x5: ILLEGAL_REQUEST
ASC/ASCQ 0x24/0x00: INVALID FIELD IN CDB
This suggests that the USB bridge does not support SAT ATA PASS-THROUGH when in UAS mode. Cannot be fixed by smartmontools.
follow-up: 6 comment:5 by , 7 years ago
Is there anything that can be done at the kernel driver level to query the device in BOT mode while the UAS is enabled? I wonder how in Windows it's possible to query the SMART info while it's still in UAS mode (AIDA64 can do it for example).
comment:6 by , 7 years ago
Same issue was reported for similar drive with Id 0x0bc2:0x2322, see ticket #973.
Note that various Seagate devices are listed in the unusual_uas.h file of Linux kernel. Which means that various aspects of UAS are broken with these devices.
Is there anything that can be done at the kernel driver level to query the device in BOT mode while the UAS is enabled?
No (AFAIK).
I wonder how in Windows it's possible to query the SMART info while it's still in UAS mode
Did you try smartctl for Windows in UAS mode?
(AIDA64 can do it for example).
Note that vendors of such closed source tools could sign a NDA to receive proprietary info from OS or device vendors. Open source developers could not.
comment:7 by , 7 years ago
I have tested smartctl both on Linux and Windows, with Seagate Expansion USB 3.0 1TB drive 0bc2:2322.
On Linux, since kernel 4.14 all Seagate enclosures have ATA passthrough disabled when using UAS (https://github.com/torvalds/linux/commit/7fee72d5e8f1e7b8d8212e28291b1a0243ecf2f1). So, smartctl does not work when UAS is enabled.
But, on Windows, smartctl works correctly and uses ATA passthrough (16) in UAS mode (I have verified this using a USB sniffer, it definitely uses UAS, not USBMS).
So it seems the only problem is that in the Linux kernel all Seagate enclosures are treated as if they always have broken ATA passthrough.
comment:8 by , 7 years ago
| Summary: | UAS support for smartmontools → No SMART access to Seagate devices under Linux if UAS is used |
|---|---|
| Type: | enhancement → defect |
Thanks for the info.
comment:9 by , 7 years ago
| Milestone: | undecided |
|---|---|
| Resolution: | → invalid |
| Status: | new → closed |
Linux 4.14 or later disable SAT ATA PASS-THROUGH to devices with USB Vendor Id 0x0bc2 if UAS is used. See above for details. This cannot be fixed by smartmontools.
comment:10 by , 7 years ago
Thanks everyone. Everything's clear now. If someone Googles about this problem, hopefully they'll find this ticket. I was lost about what's going on when I opened it.
comment:12 by , 7 years ago
Nice! I sent an email to a kernel developer and he told me that although Seagate is making improvements, although still there are broken devices so the ata-passthrough in UAS mode ban will be still in place. He implied that I was lucky if a Windows tool managed to access the SMART info of the device with that firmware bug.
He told me too how to disable the UAS quirk, which I did, and now I can access the SMART info in UAS mode. It seems this hard disk model from Seagate doesn't have any firmware bug.
The method is adding the same as adding a USB quirk to a device but without the ending letter which defines the quirk to apply, i.e. no ending letter means "no quirks" for this device. In my case, I added to the kernel command line: usb_storage.quirks=0bc2:231a:
So, thanks again to everyone involved!
comment:13 by , 7 years ago
Thanks for this post! I did indeed find it via google, although not via duckduckgo :-(
Note:
See TracTickets
for help on using tickets.
The USB bridge might support SAT ATA PASS-THROUGH command only in BOT mode, but not in UAS mode.
Please provide output of
smartctl -r ioctl,2 -d sat -i /dev/sdbas an attachment to this ticket. Add kernel messages triggered by the command (if any).