Seagate ST1000DX002 not in database

[mroberds]

Smartmontools People,

I recently bought a Seagate ST1000DX002 drive (combination HD and SSD) and it is not in the database. The sticker on the drive indicates that it was manufactured in July 2016.

I *suspect* it should be covered by the "Seagate Desktop SSHD" entry in drivedb.h 4352, "tested with ST2000DX001-1CM164/CC43". Changing the existing regex for that entry to "ST[124]000DX00[12]-.*" is probably right, although the current marketing sheet (below) only lists 1 and 2 GB versions of the DX002.

I monitored the value for attribute 240 (Head_Flying_Hours) at a couple of intervals, and the conversion done by "-v 240,msec24hour32" in the above entry matches what I expected.

Seagate's marketing sheet for this drive is here: ​http://www.seagate.com/www-content/product-content/firecuda-family/firecuda/files/firecuda-ds-1903-1-1606us.pdf

Seagate's technical manual for this drive is here: ​http://www.seagate.com/www-content/product-content/firecuda-family/firecuda/en-us/docs/100804185b.pdf
This manual lists the supported SMART *commands* on PDF page 31, but not the SMART attributes.

I will be attaching three files of smartctl output: one after the drive had been running for about one hour; one after it had been running for about three hours; and one after it had been running for about four hours AND a short self-test had happened.

Thanks!

Matt Roberds

[mroberds]

smartctl -a after about one hour of runtime

[mroberds]

smartctl -a after about three hours of runtime

[mroberds]

smartctl -a after about four hours of runtime AND one short self-test

[Alex Samorukov]

Thank you, added to drivedb, r4468.

[Christian Franke]

Merged in r4490.

[Christian Franke]

Regex does not match ST1000DX002-2DV162.

[Christian Franke]

r4499, r4501.