#632 closed enhancement (fixed)
Not in smartctl database SAMSUNG-MZ7LN512HCHP
| Reported by: | Tomas Krojzl | Owned by: | |
|---|---|---|---|
| Priority: | minor | Milestone: | Release 6.5 |
| Component: | drivedb | Version: | 6.4 |
| Keywords: | Cc: |
Description
My disk is not in smartctl database.
Disk Vendor: SAMSUNG
Disk Model: MZ7LN512HCHP
Details: http://www.samsung.com/semiconductor/products/flash-storage/client-ssd/MZ7LN512HCHP
# cat smartctl-SAMSUNG-MZ7LN512HCHP.txt
smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.10.0-327.3.1.el7.x86_64] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: SAMSUNG MZ7LN512HCHP-000L1
Serial Number: S1ZKNXAG835007
LU WWN Device Id: 5 002538 d00000000
Firmware Version: EMT04L0Q
User Capacity: 512,110,190,592 bytes [512 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: Solid State Device
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4c
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Wed Jan 13 20:50:46 2016 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM feature is: Unavailable
Rd look-ahead is: Enabled
Write cache is: Enabled
ATA Security is: Disabled, frozen [SEC2]
Wt Cache Reorder: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x80) Offline data collection activity
was never started.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 0) seconds.
Offline data collection
capabilities: (0x53) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
No Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 265) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 1
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0
9 Power_On_Hours -O--CK 099 099 000 - 139
12 Power_Cycle_Count -O--CK 099 099 000 - 40
170 Unknown_Attribute -O--CK 100 100 010 - 0
171 Unknown_Attribute -O--CK 100 100 010 - 0
172 Unknown_Attribute -O--CK 100 100 010 - 0
173 Unknown_Attribute PO--CK 099 099 005 - 2
174 Unknown_Attribute -O--CK 099 099 000 - 9
178 Used_Rsvd_Blk_Cnt_Chip PO--C- 100 100 010 - 0
180 Unused_Rsvd_Blk_Cnt_Tot PO--C- 100 100 010 - 1567
184 End-to-End_Error PO--CK 100 100 097 - 0
187 Reported_Uncorrect -O--CK 100 100 000 - 0
194 Temperature_Celsius -O--CK 057 048 000 - 43
199 UDMA_CRC_Error_Count -OSRCK 100 100 000 - 0
233 Media_Wearout_Indicator PO--C- 099 099 000 - 16760437
241 Total_LBAs_Written -O--CK 099 099 000 - 638
242 Total_LBAs_Read -O--CK 099 099 000 - 402
249 Unknown_Attribute -O--CK 099 099 000 - 1024
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 1 Comprehensive SMART error log
0x03 GPL R/O 1 Ext. Comprehensive SMART error log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 1 Extended self-test log
0x09 SL R/W 1 Selective self-test log
0x10 GPL R/O 1 NCQ Command Error log
0x11 GPL R/O 1 SATA Phy Event Counters
0x13 GPL R/O 1 SATA NCQ Send and Receive log
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xdf GPL,SL VS 1 Device vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (1 sectors)
No Errors Logged
SMART Extended Self-test Log Version: 1 (1 sectors)
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed without error 00% 138 -
# 2 Short offline Completed without error 00% 136 -
Warning! SMART Selective Self-Test Log Structure error: invalid SMART checksum.
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
255 0 65535 Read_scanning was never started
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 3
SCT Version (vendor specific): 256 (0x0100)
SCT Support Level: 1
Device State: Active (0)
Current Temperature: 44 Celsius
Power Cycle Min/Max Temperature: 35/51 Celsius
Lifetime Min/Max Temperature: 0/70 Celsius
Under/Over Temperature Limit Count: 4294967295/4294901760
SCT Temperature History Version: 3 (Unknown, should be 2)
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 10 minutes
Min/Max recommended Temperature: 0/70 Celsius
Min/Max Temperature Limit: 0/70 Celsius
Temperature History Size (Index): 128 (42)
Index Estimated Time Temperature Celsius
43 2016-01-12 23:40 38 *******************
44 2016-01-12 23:50 38 *******************
45 2016-01-13 00:00 38 *******************
46 2016-01-13 00:10 37 ******************
47 2016-01-13 00:20 37 ******************
48 2016-01-13 00:30 36 *****************
... ..( 57 skipped). .. *****************
106 2016-01-13 10:10 36 *****************
107 2016-01-13 10:20 37 ******************
... ..( 2 skipped). .. ******************
110 2016-01-13 10:50 37 ******************
111 2016-01-13 11:00 38 *******************
... ..( 10 skipped). .. *******************
122 2016-01-13 12:50 38 *******************
123 2016-01-13 13:00 40 *********************
124 2016-01-13 13:10 39 ********************
125 2016-01-13 13:20 38 *******************
126 2016-01-13 13:30 37 ******************
127 2016-01-13 13:40 37 ******************
0 2016-01-13 13:50 38 *******************
... ..( 4 skipped). .. *******************
5 2016-01-13 14:40 38 *******************
6 2016-01-13 14:50 37 ******************
7 2016-01-13 15:00 38 *******************
... ..( 11 skipped). .. *******************
19 2016-01-13 17:00 38 *******************
20 2016-01-13 17:10 39 ********************
... ..( 5 skipped). .. ********************
26 2016-01-13 18:10 39 ********************
27 2016-01-13 18:20 38 *******************
... ..( 3 skipped). .. *******************
31 2016-01-13 19:00 38 *******************
32 2016-01-13 19:10 39 ********************
33 2016-01-13 19:20 38 *******************
... ..( 5 skipped). .. *******************
39 2016-01-13 20:20 38 *******************
40 2016-01-13 20:30 39 ********************
41 2016-01-13 20:40 51 ********************************
42 2016-01-13 20:50 44 *************************
SCT Error Recovery Control:
Read: Disabled
Write: Disabled
Device Statistics (GP Log 0x04) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 2 0 Command failed due to ICRC error
0x0002 2 0 R_ERR response for data FIS
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0005 2 0 R_ERR response for non-data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
0x0008 2 0 Device-to-host non-data FIS retries
0x0009 2 4 Transition from drive PhyRdy to drive PhyNRdy
0x000a 2 4 Device-to-host register FISes sent due to a COMRESET
0x000b 2 0 CRC errors within host-to-device FIS
0x000d 2 0 Non-CRC errors within host-to-device FIS
0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC
0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC
Change History (6)
comment:1 by , 9 years ago
| Component: | all → drivedb |
|---|---|
| Milestone: | → Release 6.5 |
| Priority: | major → minor |
| Type: | defect → enhancement |
comment:2 by , 9 years ago
| Resolution: | → fixed |
|---|---|
| Status: | new → closed |
comment:3 by , 9 years ago
| Resolution: | fixed |
|---|---|
| Status: | closed → reopened |
Since [r4200] is not yet in branch RELEASE_6_2_DRIVEDB it was not updated by my update-smart-drivedb automatically.
Therefore I made relevant updates manually to drivedb.h - see the result below..
Now the drive is detected - however there are still many "Unknown_Attribute" occurrences - not sure if these are default of not but maybe following might be used to determine the attribute meaning:
https://en.wikipedia.org/wiki/S.M.A.R.T.#Known_ATA_S.M.A.R.T._attributes
Also there seems to be issue with smartmontools retrieving self-test log structure:
"Warning! SMART Selective Self-Test Log Structure error: invalid SMART checksum."
You could observe identical behavior also in ticket #636 - so this is not issue with just one particular SSD.
Here is full output:
# smartctl -x /dev/sda
smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.10.0-327.3.1.el7.x86_64] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Samsung based SSDs
Device Model: SAMSUNG MZ7LN512HCHP-000L1
Serial Number: S1ZKNXAG835007
LU WWN Device Id: 5 002538 d00000000
Firmware Version: EMT04L0Q
User Capacity: 512,110,190,592 bytes [512 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: Solid State Device
Device is: In smartctl database [for details use: -P show]
ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4c
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Tue Jan 19 15:29:51 2016 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM feature is: Unavailable
Rd look-ahead is: Enabled
Write cache is: Enabled
ATA Security is: Disabled, frozen [SEC2]
Wt Cache Reorder: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x80) Offline data collection activity
was never started.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 0) seconds.
Offline data collection
capabilities: (0x53) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
No Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 265) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 1
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0
9 Power_On_Hours -O--CK 099 099 000 - 197
12 Power_Cycle_Count -O--CK 099 099 000 - 51
170 Unknown_Attribute -O--CK 100 100 010 - 0
171 Unknown_Attribute -O--CK 100 100 010 - 0
172 Unknown_Attribute -O--CK 100 100 010 - 0
173 Unknown_Attribute PO--CK 099 099 005 - 2
174 Unknown_Attribute -O--CK 099 099 000 - 9
178 Used_Rsvd_Blk_Cnt_Chip PO--C- 100 100 010 - 0
180 Unused_Rsvd_Blk_Cnt_Tot PO--C- 100 100 010 - 1567
184 End-to-End_Error PO--CK 100 100 097 - 0
187 Uncorrectable_Error_Cnt -O--CK 100 100 000 - 0
194 Temperature_Celsius -O--CK 063 048 000 - 37
199 CRC_Error_Count -OSRCK 100 100 000 - 0
233 Media_Wearout_Indicator PO--C- 099 099 000 - 16760437
241 Total_LBAs_Written -O--CK 099 099 000 - 678
242 Total_LBAs_Read -O--CK 099 099 000 - 449
249 Unknown_Attribute -O--CK 099 099 000 - 1024
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 1 Comprehensive SMART error log
0x03 GPL R/O 1 Ext. Comprehensive SMART error log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 1 Extended self-test log
0x09 SL R/W 1 Selective self-test log
0x10 GPL R/O 1 NCQ Command Error log
0x11 GPL R/O 1 SATA Phy Event Counters
0x13 GPL R/O 1 SATA NCQ Send and Receive log
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xdf GPL,SL VS 1 Device vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (1 sectors)
No Errors Logged
SMART Extended Self-test Log Version: 1 (1 sectors)
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 181 -
# 2 Short offline Completed without error 00% 136 -
Warning! SMART Selective Self-Test Log Structure error: invalid SMART checksum.
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
255 0 65535 Read_scanning was never started
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 3
SCT Version (vendor specific): 256 (0x0100)
SCT Support Level: 1
Device State: Active (0)
Current Temperature: 37 Celsius
Power Cycle Min/Max Temperature: 28/40 Celsius
Lifetime Min/Max Temperature: 0/70 Celsius
Under/Over Temperature Limit Count: 4294967295/4294901760
SCT Temperature History Version: 3 (Unknown, should be 2)
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 10 minutes
Min/Max recommended Temperature: 0/70 Celsius
Min/Max Temperature Limit: 0/70 Celsius
Temperature History Size (Index): 128 (35)
Index Estimated Time Temperature Celsius
36 2016-01-18 18:10 ? -
... ..( 90 skipped). .. -
127 2016-01-19 09:20 ? -
0 2016-01-19 09:30 40 *********************
1 2016-01-19 09:40 28 *********
2 2016-01-19 09:50 32 *************
3 2016-01-19 10:00 34 ***************
4 2016-01-19 10:10 35 ****************
5 2016-01-19 10:20 36 *****************
6 2016-01-19 10:30 36 *****************
7 2016-01-19 10:40 36 *****************
8 2016-01-19 10:50 37 ******************
... ..( 26 skipped). .. ******************
35 2016-01-19 15:20 37 ******************
SCT Error Recovery Control:
Read: Disabled
Write: Disabled
Device Statistics (GP Log 0x04) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 2 0 Command failed due to ICRC error
0x0002 2 0 R_ERR response for data FIS
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0005 2 0 R_ERR response for non-data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
0x0008 2 0 Device-to-host non-data FIS retries
0x0009 2 4 Transition from drive PhyRdy to drive PhyNRdy
0x000a 2 4 Device-to-host register FISes sent due to a COMRESET
0x000b 2 0 CRC errors within host-to-device FIS
0x000d 2 0 Non-CRC errors within host-to-device FIS
0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC
0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC
Version 0, edited 9 years ago by (next)
comment:4 by , 9 years ago
Ok, thank you for reply.
- This change will be merged to other branches later, no worries.
- "Warning! SMART Selective Self-Test Log Structure error: invalid SMART checksum." is a firmware issue for such drives if no tests been running. After running selective tests this will work as intended, there is nothing to fix in smartmontools.
- Regarding "Unknown" attributes - different vendors using same attributes for the different purposes, so we cant just add some random values from the wiki. Sometime vendors publishing them in the documentation (did not found for this drives) or in the vendor software/tools. If you have such data for "Unknown" attributes or data from other trusted sources about this drive family - let us know, we will update this entry.
comment:5 by , 9 years ago
| Resolution: | → fixed |
|---|---|
| Status: | reopened → closed |
Note:
See TracTickets
for help on using tickets.
This should be already fixed in r4200, please test and reopen if not working.