unsupported highpoint rocketraid 3520

[grimlokason]

Hello,

smartctl seem to don't recognize my controler :

abyss raspi # smartctl -a -d hpt,1/1/1 /dev/sda
smartctl 6.1 2013-03-16 r3800 [x86_64-linux-3.6.6-gentoo] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org

Read Device Identity failed: Invalid argument

A mandatory SMART command failed: exiting. To continue, add one or more '-T permissive' options.

In doubt, i've tryed with various combination for the hpt,L/M/N without succes.

Some other information :

abyss raspi # smartctl -a /dev/sda
smartctl 6.1 2013-03-16 r3800 [x86_64-linux-3.6.6-gentoo] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Vendor:               HPT
Product:              VD0-0
Revision:             4.00
User Capacity:        9 001 513 254 912 bytes [9,00 TB]
Logical block size:   4096 bytes
Logical Unit id:      0x00193c0000000000
Serial number:
Device type:          disk
Local Time is:        Wed Jul  3 21:24:55 2013 CEST
SMART support is:     Unavailable - device lacks SMART capability.

=== START OF READ SMART DATA SECTION ===

Error Counter logging not supported

When i used the htp's cli tool i can get smart information :

HighPoint CLI>query devices 1/1
Mode Number:        WDC WD30EFRX-68AX9N0
Serial Number:           WD-WMC1T0854995
Firmware Version:   80.00A80
Capacity(GB):   3000.50             TotalFree(GB):  0
Status:         RAID                Flag:           NORMAL
Read Ahead:     enabled             Write Cache:    enabled
TCQ:            --                  NCQ:            enabled
-------------------------------------------------------------------------------
                                S.M.A.R.T Attributes
Status: S.M.A.R.T OK.
ID  Name                           Threshold  Value      Worst      Status
-------------------------------------------------------------------------------
1   Raw Read Error Rate            51         200        200        OK
3   Spin Up Time                   21         180        172        OK
4   Start Stop Count               0          100        100        OK
5   Reallocated Sector Ct          140        200        200        OK
7   Seek Error Rate                0          200        200        OK
9   Power On Hours                 0          93         93         OK
A   Spin Retry Count               0          100        100        OK
B   Calibration Retry Count        0          100        100        OK
C   Power Cycle Count              0          100        100        OK
C0  Power-Off Retract Count        0          200        200        OK
C1  Emergency Retract Cycle Ct     0          200        200        OK
C2  Temperature Celsius            0          125        98         OK
C4  Reallocated Event Count        0          200        200        OK
C5  Current Pending Sector         0          200        200        OK
C6  Offline Uncorrectable          0          100        253        OK
C7  UDMA CRC Error Count           0          200        200        OK
C8  Multi Zone Error Rate          0          100        253        OK
-------------------------------------------------------------------------------

Can someone help me to get this controler supported ?

Regards

[Alex Samorukov]

If you can provide an access to the hw i can take a look. My email is samm [at] os2.kiev.ua

[Alex Samorukov]

No feedback from the author