#282 closed defect (invalid)
problem with smartctl -a with SDM SSD memory device
Reported by: | jeremy385892 | Owned by: | jeremy385892 |
---|---|---|---|
Priority: | major | Milestone: | |
Component: | smartctl | Version: | 6.1 |
Keywords: | Cc: |
Description
I execute smartctl on a freebsd 8.2 (with smartmontools 6.1) platform and a SATA-Disk Module SSD memory and I have the following error with smartctl -a on this memory device:
smartctl 6.1 2013-06-17 r3822 [NS-BSD 9.1.0.alpha- i386] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
START OF INFORMATION SECTION
Device Model: 2GB SATA Flash Drive
Serial Number: 00101082267000105015
Firmware Version: SFI2101D
User Capacity: 1,982,324,736 bytes [1.98 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: Solid State Device
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: ATA8-ACS, ATA/ATAPI-4 published, ANSI NCITS 317-1998
SATA Version is: SATA 2.6, 3.0 Gb/s
Local Time is: Tue Jun 25 11:24:04 2013 GMT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
START OF READ SMART DATA SECTION
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 1) seconds.
Offline data collection
capabilities: (0x75) SMART execute Offline immediate.
No Auto Offline data collection support.
Abort Offline collection upon new
command.
No Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
No General Purpose Logging support.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 1) minutes.
Conveyance self-test routine
recommended polling time: ( 1) minutes.
SMART Attributes Data Structure revision number: 7
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
12 Power_Cycle_Count 0x0200 100 100 000 Old_age Offline - 11
160 Unknown_Attribute 0x0200 100 100 000 Old_age Offline - 0
161 Unknown_Attribute 0x0200 100 100 000 Old_age Offline - 0
162 Unknown_Attribute 0x0200 100 100 000 Old_age Offline - 151
163 Unknown_Attribute 0x0200 100 100 000 Old_age Offline - 9
164 Unknown_Attribute 0x0200 100 100 000 Old_age Offline - 5
165 Unknown_Attribute 0x0200 100 100 000 Old_age Offline - 5
241 Total_LBAs_Written 0x0200 100 100 000 Old_age Offline - 16573426
ad0: FAILURE - SMART status=51<READY,DSC,ERROR> error=4<ABORTED>
Read SMART Error Log failed: request failed, error code 0x05
ad0: FAILURE - SMART status=51<READY,DSC,ERROR> error=4<ABORTED>
Read SMART Self-test Log failed: request failed, error code 0x05
ad0: FAILURE - SMART status=51<READY,DSC,ERROR> error=4<ABORTED>
Read SMART Selective Self-test Log failed: request failed, error code 0x05
Change History (3)
comment:1 by , 11 years ago
Owner: | changed from | to
---|---|
Status: | new → assigned |
comment:2 by , 11 years ago
Resolution: | → invalid |
---|---|
Status: | assigned → closed |
comment:3 by , 11 years ago
Milestone: | Release 6.2 |
---|