Opened 4 weeks ago
Last modified 3 weeks ago
#1863 new enhancement
WDC-WD200EDGZ
| Reported by: | miaLDN | Owned by: | |
|---|---|---|---|
| Priority: | minor | Milestone: | unscheduled |
| Component: | drivedb | Version: | |
| Keywords: | hdd | Cc: |
Description
smartctl 6.5 (build date Sep 26 2022) [x86_64-linux-4.4.302+] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: WDC WD200EDGZ-11B9PA0
Firmware Version: 85.00A85
User Capacity: 20,000,588,955,648 bytes [20.0 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 7200 rpm
Form Factor: 3.5 inches
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: Unknown(0x1ffc) (minor revision not indicated)
SATA Version is: SATA >3.2 (0x7ff), 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Sat Aug 17 08:58:29 2024 IST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM feature is: Disabled
Rd look-ahead is: Enabled
Write cache is: Enabled
ATA Security is: Disabled, NOT FROZEN [SEC1]
Wt Cache Reorder: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x80) Offline data collection activity
was never started.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 0) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: (2336) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate PO-R-- 100 100 001 - 0
2 Throughput_Performance --S--- 146 146 000 - 57
3 Spin_Up_Time POS--- 083 083 001 - 370 (Average 369)
4 Start_Stop_Count -O--C- 100 100 000 - 306
5 Reallocated_Sector_Ct PO--CK 100 100 001 - 0
7 Seek_Error_Rate -O-R-- 100 100 000 - 0
8 Seek_Time_Performance --S--- 140 140 000 - 15
9 Power_On_Hours -O--C- 100 100 000 - 5283
10 Spin_Retry_Count -O--C- 100 100 000 - 0
12 Power_Cycle_Count -O--CK 100 100 000 - 293
22 Helium_Level PO---K 100 100 025 - 6553700
71 Unknown_Attribute P----- 100 100 001 - 0
90 Unknown_Attribute P---CK 100 100 001 - 511101108224
192 Power-Off_Retract_Count -O--CK 100 100 000 - 516
193 Load_Cycle_Count -O--C- 100 100 000 - 516
194 Temperature_Celsius -O---- 046 046 000 - 36 (Min/Max 14/40)
196 Reallocated_Event_Count -O--CK 100 100 000 - 0
197 Current_Pending_Sector -O---K 100 100 000 - 0
198 Offline_Uncorrectable ---R-- 100 100 000 - 0
199 UDMA_CRC_Error_Count -O-R-- 100 100 000 - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 1 Comprehensive SMART error log
0x03 GPL R/O 1 Ext. Comprehensive SMART error log
0x04 GPL R/O 256 Device Statistics log
0x04 SL R/O 255 Device Statistics log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 1 Extended self-test log
0x08 GPL R/O 2 Power Conditions log
0x09 SL R/W 1 Selective self-test log
0x0c GPL R/O 19043 Pending Defects log
0x10 GPL R/O 1 SATA NCQ Queued Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x12 GPL R/O 1 SATA NCQ NON-DATA log
0x13 GPL R/O 1 SATA NCQ Send and Receive log
0x15 GPL R/W 1 SATA Rebuild Assist log
0x21 GPL R/O 1 Write stream error log
0x22 GPL R/O 1 Read stream error log
0x24 GPL R/O 256 Current Device Internal Status Data log
0x25 GPL R/O 256 Saved Device Internal Status Data log
0x2f GPL - 1 Reserved
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xb7 SL VS 1 Device vendor specific log
0xd8-0xd9 GPL,SL VS 1 Device vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (1 sectors)
No Errors Logged
SMART Error Log Version: 1
No Errors Logged
SMART Extended Self-test Log Version: 1 (1 sectors)
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 5282 -
# 2 Short offline Aborted by host 50% 5282 -
# 3 Extended offline Completed without error 00% 5134 -
# 4 Short offline Completed without error 00% 4970 -
# 5 Short offline Completed without error 00% 4349 -
# 6 Short offline Completed without error 00% 3729 -
# 7 Extended offline Aborted by host 70% 3250 -
# 8 Short offline Completed without error 00% 3075 -
# 9 Short offline Completed without error 00% 2432 -
#10 Short offline Completed without error 00% 1808 -
#11 Extended offline Completed without error 00% 1365 -
#12 Short offline Completed without error 00% 1158 -
#13 Short offline Completed without error 00% 564 -
#14 Short offline Completed without error 00% 50 -
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 5282 -
# 2 Short offline Aborted by host 50% 5282 -
# 3 Extended offline Completed without error 00% 5134 -
# 4 Short offline Completed without error 00% 4970 -
# 5 Short offline Completed without error 00% 4349 -
# 6 Short offline Completed without error 00% 3729 -
# 7 Extended offline Aborted by host 70% 3250 -
# 8 Short offline Completed without error 00% 3075 -
# 9 Short offline Completed without error 00% 2432 -
#10 Short offline Completed without error 00% 1808 -
#11 Extended offline Completed without error 00% 1365 -
#12 Short offline Completed without error 00% 1158 -
#13 Short offline Completed without error 00% 564 -
#14 Short offline Completed without error 00% 50 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 3
SCT Version (vendor specific): 256 (0x0100)
SCT Support Level: 0
Device State: Active (0)
Current Temperature: 36 Celsius
Power Cycle Min/Max Temperature: 32/39 Celsius
Lifetime Min/Max Temperature: 14/40 Celsius
Under/Over Temperature Limit Count: 0/0
SMART Status: 0xc24f (PASSED)
Minimum supported ERC Time Limit: 65 (6.5 seconds)
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 1 minute
Min/Max recommended Temperature: 0/65 Celsius
Min/Max Temperature Limit: -40/70 Celsius
Temperature History Size (Index): 128 (37)
Index Estimated Time Temperature Celsius
38 2024-08-17 06:51 34 ***************
... ..( 74 skipped). .. ***************
113 2024-08-17 08:06 34 ***************
114 2024-08-17 08:07 35 ****************
... ..( 23 skipped). .. ****************
10 2024-08-17 08:31 35 ****************
11 2024-08-17 08:32 36 *****************
... ..( 21 skipped). .. *****************
33 2024-08-17 08:54 36 *****************
34 2024-08-17 08:55 35 ****************
35 2024-08-17 08:56 36 *****************
36 2024-08-17 08:57 36 *****************
37 2024-08-17 08:58 34 ***************
SCT Error Recovery Control:
Read: Disabled
Write: Disabled
Device Statistics (GP/SMART Log 0x04) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 2 0 Command failed due to ICRC error
0x0002 2 0 R_ERR response for data FIS
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0005 2 0 R_ERR response for non-data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
0x0008 2 0 Device-to-host non-data FIS retries
0x0009 2 5 Transition from drive PhyRdy to drive PhyNRdy
0x000a 2 2 Device-to-host register FISes sent due to a COMRESET
0x000b 2 0 CRC errors within host-to-device FIS
0x000d 2 0 Non-CRC errors within host-to-device FIS
Change History (4)
comment:1 by , 3 weeks ago
| Keywords: | hdd added |
|---|---|
| Milestone: | → unscheduled |
| Summary: | WDC-WD200EDGZ-11BLDS0 → WDC-WD200EDGZ |
comment:2 by , 3 weeks ago
smartctl 6.5 (build date Sep 26 2022) [x86_64-linux-4.4.302+] (local build)
This version is 8+ years old. Drive database updates for 6.x versions will be discontinued soon.
comment:3 by , 3 weeks ago
Version part of latest DSM OS provided by Synology.
I ran latest smartctl in a virtual environment to check before submitting ticket, and checked the drive database by hand.
comment:4 by , 3 weeks ago
Synology should update smartmontools. As a customer, you may want to report this to Synology support.
Thanks for careful checking of database.
Note:
See TracTickets
for help on using tickets.
Ticket #1864 has been marked as a duplicate of this ticket.