Opened 2 years ago

Last modified 2 years ago

#1673 new enhancement

WDC WD141KFGX-68FH9N0

Reported by: Cubittus Owned by:
Priority: minor Milestone: unscheduled
Component: drivedb Version:
Keywords: hdd Cc:

Description

This is a 14TB WD Red Pro NAS drive. It's was installed about 1 month ago.
https://www.westerndigital.com/en-gb/products/internal-drives/wd-red-pro-sata-hdd#WD141KFGX

Comparing with a similar, but 3 year older, 10TB WD100EFAX-68LHPN0, Attribute 22 would seem to be Helium_Level.

smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.0.10-gentoo-alex1] (local build)
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Device Model:     WDC WD141KFGX-68FH9N0
Firmware Version: 83.00A83
User Capacity:    14,000,519,643,136 bytes [14.0 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    7200 rpm
Form Factor:      3.5 inches
Device is:        Not in smartctl database 7.3/5417
ATA Version is:   ACS-2, ATA8-ACS T13/1699-D revision 4
SATA Version is:  SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Tue Nov 29 09:06:10 2022 GMT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is:   Unavailable
APM level is:     164 (intermediate level without standby)
Rd look-ahead is: Enabled
Write cache is:   Enabled
DSN feature is:   Unavailable
ATA Security is:  Disabled, frozen [SEC2]
Wt Cache Reorder: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x82)	Offline data collection activity
					was completed without error.
					Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever 
					been run.
Total time to complete Offline 
data collection: 		(  101) seconds.
Offline data collection
capabilities: 			 (0x5b) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Suspend Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					No Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   2) minutes.
Extended self-test routine
recommended polling time: 	 (1400) minutes.
SCT capabilities: 	       (0x003d)	SCT Status supported.
					SCT Error Recovery Control supported.
					SCT Feature Control supported.
					SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAGS    VALUE WORST THRESH FAIL RAW_VALUE
  1 Raw_Read_Error_Rate     PO-R--   100   100   001    -    0
  2 Throughput_Performance  --S---   138   138   054    -    92
  3 Spin_Up_Time            POS---   081   081   001    -    377 (Average 377)
  4 Start_Stop_Count        -O--C-   100   100   000    -    18
  5 Reallocated_Sector_Ct   PO--CK   100   100   001    -    0
  7 Seek_Error_Rate         -O-R--   100   100   001    -    0
  8 Seek_Time_Performance   --S---   133   133   020    -    18
  9 Power_On_Hours          -O--C-   100   100   000    -    722
 10 Spin_Retry_Count        -O--C-   100   100   001    -    0
 12 Power_Cycle_Count       -O--CK   100   100   000    -    18
 22 Unknown_Attribute       PO---K   100   100   025    -    100
192 Power-Off_Retract_Count -O--CK   100   100   000    -    1119
193 Load_Cycle_Count        -O--C-   100   100   000    -    1119
194 Temperature_Celsius     -O----   066   066   000    -    29 (Min/Max 18/34)
196 Reallocated_Event_Count -O--CK   100   100   000    -    0
197 Current_Pending_Sector  -O---K   100   100   000    -    0
198 Offline_Uncorrectable   ---R--   100   100   000    -    0
199 UDMA_CRC_Error_Count    -O-R--   100   100   000    -    0
                            ||||||_ K auto-keep
                            |||||__ C event count
                            ||||___ R error rate
                            |||____ S speed/performance
                            ||_____ O updated online
                            |______ P prefailure warning

General Purpose Log Directory Version 1
SMART           Log Directory Version 1 [multi-sector log support]
Address    Access  R/W   Size  Description
0x00       GPL,SL  R/O      1  Log Directory
0x01           SL  R/O      1  Summary SMART error log
0x02           SL  R/O      1  Comprehensive SMART error log
0x03       GPL     R/O      1  Ext. Comprehensive SMART error log
0x04       GPL     R/O    256  Device Statistics log
0x04       SL      R/O    255  Device Statistics log
0x06           SL  R/O      1  SMART self-test log
0x07       GPL     R/O      1  Extended self-test log
0x08       GPL     R/O      2  Power Conditions log
0x09           SL  R/W      1  Selective self-test log
0x0c       GPL     R/O   5501  Pending Defects log
0x10       GPL     R/O      1  NCQ Command Error log
0x11       GPL     R/O      1  SATA Phy Event Counters log
0x12       GPL     R/O      1  SATA NCQ Non-Data log
0x13       GPL     R/O      1  SATA NCQ Send and Receive log
0x15       GPL     R/W      1  Rebuild Assist log
0x21       GPL     R/O      1  Write stream error log
0x22       GPL     R/O      1  Read stream error log
0x24       GPL     R/O    256  Current Device Internal Status Data log
0x25       GPL     R/O    256  Saved Device Internal Status Data log
0x2f       GPL     -        1  Set Sector Configuration
0x30       GPL,SL  R/O      9  IDENTIFY DEVICE data log
0x80-0x9f  GPL,SL  R/W     16  Host vendor specific log
0xe0       GPL,SL  R/W      1  SCT Command/Status
0xe1       GPL,SL  R/W      1  SCT Data Transfer

SMART Extended Comprehensive Error Log Version: 1 (1 sectors)
No Errors Logged

SMART Extended Self-test Log Version: 1 (1 sectors)
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline       Completed without error       00%       722         -
# 2  Short offline       Completed without error       00%       715         -
# 3  Short offline       Completed without error       00%       691         -
# 4  Short offline       Completed without error       00%       667         -
# 5  Short offline       Completed without error       00%       643         -
# 6  Short offline       Completed without error       00%       619         -
# 7  Short offline       Completed without error       00%       595         -
# 8  Short offline       Completed without error       00%       571         -
# 9  Short offline       Completed without error       00%       547         -
#10  Short offline       Completed without error       00%       524         -
#11  Short offline       Completed without error       00%       500         -
#12  Short offline       Completed without error       00%       476         -
#13  Short offline       Completed without error       00%       452         -
#14  Short offline       Completed without error       00%       428         -
#15  Short offline       Completed without error       00%       404         -
#16  Short offline       Completed without error       00%       380         -
#17  Short offline       Completed without error       00%       356         -
#18  Short offline       Completed without error       00%       332         -
#19  Short offline       Completed without error       00%       308         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

SCT Status Version:                  3
SCT Version (vendor specific):       256 (0x0100)
Device State:                        Active (0)
Current Temperature:                    29 Celsius
Power Cycle Min/Max Temperature:     25/31 Celsius
Lifetime    Min/Max Temperature:     18/34 Celsius
Under/Over Temperature Limit Count:   0/0
SMART Status:                        0xc24f (PASSED)
Minimum supported ERC Time Limit:    70 (7.0 seconds)

SCT Temperature History Version:     2
Temperature Sampling Period:         1 minute
Temperature Logging Interval:        1 minute
Min/Max recommended Temperature:      0/60 Celsius
Min/Max Temperature Limit:           -40/70 Celsius
Temperature History Size (Index):    128 (123)

Index    Estimated Time   Temperature Celsius
 124    2022-11-29 06:59    26  *******
 ...    ..(  4 skipped).    ..  *******
   1    2022-11-29 07:04    26  *******
   2    2022-11-29 07:05    25  ******
 ...    ..(  2 skipped).    ..  ******
   5    2022-11-29 07:08    25  ******
   6    2022-11-29 07:09    26  *******
   7    2022-11-29 07:10    26  *******
   8    2022-11-29 07:11    26  *******
   9    2022-11-29 07:12    27  ********
  10    2022-11-29 07:13    27  ********
  11    2022-11-29 07:14    26  *******
 ...    ..(  7 skipped).    ..  *******
  19    2022-11-29 07:22    26  *******
  20    2022-11-29 07:23    27  ********
 ...    ..(  6 skipped).    ..  ********
  27    2022-11-29 07:30    27  ********
  28    2022-11-29 07:31    26  *******
 ...    ..( 19 skipped).    ..  *******
  48    2022-11-29 07:51    26  *******
  49    2022-11-29 07:52    27  ********
 ...    ..( 17 skipped).    ..  ********
  67    2022-11-29 08:10    27  ********
  68    2022-11-29 08:11    26  *******
 ...    ..(  9 skipped).    ..  *******
  78    2022-11-29 08:21    26  *******
  79    2022-11-29 08:22    27  ********
 ...    ..(  2 skipped).    ..  ********
  82    2022-11-29 08:25    27  ********
  83    2022-11-29 08:26    28  *********
  84    2022-11-29 08:27    27  ********
 ...    ..(  8 skipped).    ..  ********
  93    2022-11-29 08:36    27  ********
  94    2022-11-29 08:37    28  *********
 ...    ..(  8 skipped).    ..  *********
 103    2022-11-29 08:46    28  *********
 104    2022-11-29 08:47    27  ********
 ...    ..(  4 skipped).    ..  ********
 109    2022-11-29 08:52    27  ********
 110    2022-11-29 08:53    28  *********
 ...    ..(  7 skipped).    ..  *********
 118    2022-11-29 09:01    28  *********
 119    2022-11-29 09:02    29  **********
 ...    ..(  2 skipped).    ..  **********
 122    2022-11-29 09:05    29  **********
 123    2022-11-29 09:06    26  *******

SCT Error Recovery Control:
           Read:     70 (7.0 seconds)
          Write:     70 (7.0 seconds)

Device Statistics (GP Log 0x04)
Page  Offset Size        Value Flags Description
0x01  =====  =               =  ===  == General Statistics (rev 1) ==
0x01  0x008  4              18  ---  Lifetime Power-On Resets
0x01  0x010  4             722  ---  Power-on Hours
0x01  0x018  6     20749280728  ---  Logical Sectors Written
0x01  0x020  6        12202238  ---  Number of Write Commands
0x01  0x028  6       290558873  ---  Logical Sectors Read
0x01  0x030  6         1101776  ---  Number of Read Commands
0x01  0x038  6      2600398400  ---  Date and Time TimeStamp
0x03  =====  =               =  ===  == Rotating Media Statistics (rev 1) ==
0x03  0x008  4             282  ---  Spindle Motor Power-on Hours
0x03  0x010  4             282  ---  Head Flying Hours
0x03  0x018  4            1119  ---  Head Load Events
0x03  0x020  4               0  ---  Number of Reallocated Logical Sectors
0x03  0x028  4               0  ---  Read Recovery Attempts
0x03  0x030  4               1  ---  Number of Mechanical Start Failures
0x04  =====  =               =  ===  == General Errors Statistics (rev 1) ==
0x04  0x008  4               0  ---  Number of Reported Uncorrectable Errors
0x04  0x010  4               0  ---  Resets Between Cmd Acceptance and Completion
0x04  0x018  4               0  ---  Physical Element Status Changed
0x05  =====  =               =  ===  == Temperature Statistics (rev 1) ==
0x05  0x008  1              29  ---  Current Temperature
0x05  0x010  1              26  N--  Average Short Term Temperature
0x05  0x018  1              28  N--  Average Long Term Temperature
0x05  0x020  1              34  ---  Highest Temperature
0x05  0x028  1              18  ---  Lowest Temperature
0x05  0x030  1              33  N--  Highest Average Short Term Temperature
0x05  0x038  1              22  N--  Lowest Average Short Term Temperature
0x05  0x040  1              32  N--  Highest Average Long Term Temperature
0x05  0x048  1              25  N--  Lowest Average Long Term Temperature
0x05  0x050  4               0  ---  Time in Over-Temperature
0x05  0x058  1              60  ---  Specified Maximum Operating Temperature
0x05  0x060  4               0  ---  Time in Under-Temperature
0x05  0x068  1               0  ---  Specified Minimum Operating Temperature
0x06  =====  =               =  ===  == Transport Statistics (rev 1) ==
0x06  0x008  4              91  ---  Number of Hardware Resets
0x06  0x010  4              32  ---  Number of ASR Events
0x06  0x018  4               0  ---  Number of Interface CRC Errors
0xff  =====  =               =  ===  == Vendor Specific Statistics (rev 1) ==
                                |||_ C monitored condition met
                                ||__ D supports DSN
                                |___ N normalized value

Pending Defects log (GP Log 0x0c)
No Defects Logged

SATA Phy Event Counters (GP Log 0x11)
ID      Size     Value  Description
0x0001  2            0  Command failed due to ICRC error
0x0002  2            0  R_ERR response for data FIS
0x0003  2            0  R_ERR response for device-to-host data FIS
0x0004  2            0  R_ERR response for host-to-device data FIS
0x0005  2            0  R_ERR response for non-data FIS
0x0006  2            0  R_ERR response for device-to-host non-data FIS
0x0007  2            0  R_ERR response for host-to-device non-data FIS
0x0008  2            0  Device-to-host non-data FIS retries
0x0009  2            6  Transition from drive PhyRdy to drive PhyNRdy
0x000a  2            5  Device-to-host register FISes sent due to a COMRESET
0x000b  2            0  CRC errors within host-to-device FIS
0x000d  2            0  Non-CRC errors within host-to-device FIS


Change History (1)

comment:1 by Christian Franke, 2 years ago

Keywords: hdd added
Milestone: unscheduled
Note: See TracTickets for help on using tickets.