Opened 3 years ago
Closed 2 years ago
#1624 closed enhancement (fixed)
Drive not in database: Samsung SSD MZ7WD960HCGP
| Reported by: | jchamb2010 | Owned by: | Christian Franke |
|---|---|---|---|
| Priority: | minor | Milestone: | Release 7.4 |
| Component: | drivedb | Version: | 7.2 |
| Keywords: | ssd | Cc: |
Description
smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.13.19-6-pve] (local build)
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: SAMSUNG MZ7WD960HCGP-000PU
Firmware Version: DXM9BW4Q
User Capacity: 960,197,124,096 bytes [960 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: Solid State Device
TRIM Command: Available, deterministic, zeroed
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4c
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Thu Jun 16 11:24:46 2022 CDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM feature is: Unavailable
Rd look-ahead is: Enabled
Write cache is: Disabled
DSN feature is: Unavailable
ATA Security is: Disabled, NOT FROZEN [SEC1]
Wt Cache Reorder: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x80) Offline data collection activity
was never started.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 4200) seconds.
Offline data collection
capabilities: (0x53) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
No Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 70) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 1
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0
9 Power_On_Hours -O--CK 088 088 000 - 56003
12 Power_Cycle_Count -O--CK 099 099 000 - 32
177 Wear_Leveling_Count PO--C- 099 099 005 - 44
179 Used_Rsvd_Blk_Cnt_Tot PO--C- 100 100 010 - 0
180 Unused_Rsvd_Blk_Cnt_Tot PO--C- 100 100 010 - 20992
181 Program_Fail_Cnt_Total -O--CK 100 100 000 - 0
182 Erase_Fail_Count_Total -O--CK 100 100 000 - 0
183 Runtime_Bad_Block PO--C- 100 100 010 - 0
184 End-to-End_Error PO--CK 100 100 097 - 0
187 Reported_Uncorrect -O--CK 100 100 000 - 0
190 Airflow_Temperature_Cel -O--CK 074 074 000 - 26
195 Hardware_ECC_Recovered -O-RC- 200 200 000 - 0
199 UDMA_CRC_Error_Count -OSRCK 100 100 000 - 0
202 Unknown_SSD_Attribute PO--CK 100 100 010 - 0
235 Unknown_Attribute -O--C- 099 099 000 - 26
241 Total_LBAs_Written -O--CK 099 099 000 - 33170546903
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 GPL,SL R/O 1 Summary SMART error log
0x02 GPL,SL R/O 1 Comprehensive SMART error log
0x03 GPL,SL R/O 1 Ext. Comprehensive SMART error log
0x06 GPL,SL R/O 1 SMART self-test log
0x07 GPL,SL R/O 1 Extended self-test log
0x09 GPL,SL R/W 1 Selective self-test log
0x10 GPL,SL R/O 1 NCQ Command Error log
0x11 GPL,SL R/O 1 SATA Phy Event Counters log
0x13 GPL,SL R/O 1 SATA NCQ Send and Receive log
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xa0 GPL,SL VS 16 Device vendor specific log
SMART Extended Comprehensive Error Log Version: 1 (1 sectors)
No Errors Logged
SMART Extended Self-test Log Version: 1 (1 sectors)
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 55981 -
# 2 Short offline Completed without error 00% 55957 -
# 3 Extended offline Completed without error 00% 55955 -
# 4 Short offline Completed without error 00% 55933 -
# 5 Short offline Completed without error 00% 55909 -
# 6 Short offline Completed without error 00% 55885 -
# 7 Short offline Completed without error 00% 55861 -
# 8 Short offline Completed without error 00% 55837 -
# 9 Short offline Completed without error 00% 55813 -
#10 Short offline Completed without error 00% 55789 -
#11 Extended offline Completed without error 00% 55787 -
#12 Short offline Completed without error 00% 55765 -
#13 Short offline Completed without error 00% 55741 -
#14 Short offline Completed without error 00% 55717 -
#15 Short offline Completed without error 00% 55693 -
#16 Short offline Completed without error 00% 55669 -
#17 Short offline Completed without error 00% 55645 -
#18 Short offline Completed without error 00% 55621 -
#19 Extended offline Completed without error 00% 55619 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
255 0 65535 Read_scanning was never started
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 3
SCT Version (vendor specific): 256 (0x0100)
Device State: SCT command executing in background (5)
Current Temperature: 26 Celsius
Power Cycle Min/Max Temperature: 25/31 Celsius
Lifetime Min/Max Temperature: 0/70 Celsius
Under/Over Temperature Limit Count: 0/0
SCT Temperature History Version: 3 (Unknown, should be 2)
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 1 minute
Min/Max recommended Temperature: 0/70 Celsius
Min/Max Temperature Limit: 0/70 Celsius
Temperature History Size (Index): 128 (22)
Index Estimated Time Temperature Celsius
23 2022-06-16 09:17 26 *******
24 2022-06-16 09:18 26 *******
25 2022-06-16 09:19 27 ********
26 2022-06-16 09:20 26 *******
27 2022-06-16 09:21 26 *******
28 2022-06-16 09:22 27 ********
... ..( 10 skipped). .. ********
39 2022-06-16 09:33 27 ********
40 2022-06-16 09:34 26 *******
... ..( 44 skipped). .. *******
85 2022-06-16 10:19 26 *******
86 2022-06-16 10:20 25 ******
87 2022-06-16 10:21 26 *******
88 2022-06-16 10:22 26 *******
89 2022-06-16 10:23 26 *******
90 2022-06-16 10:24 25 ******
... ..( 51 skipped). .. ******
14 2022-06-16 11:16 25 ******
15 2022-06-16 11:17 26 *******
16 2022-06-16 11:18 25 ******
17 2022-06-16 11:19 25 ******
18 2022-06-16 11:20 26 *******
19 2022-06-16 11:21 25 ******
20 2022-06-16 11:22 25 ******
21 2022-06-16 11:23 26 *******
22 2022-06-16 11:24 26 *******
SCT Error Recovery Control:
Read: Disabled
Write: Disabled
Device Statistics (GP/SMART Log 0x04) not supported
Pending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 2 0 Command failed due to ICRC error
0x0002 2 0 R_ERR response for data FIS
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0005 2 0 R_ERR response for non-data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
0x0008 2 0 Device-to-host non-data FIS retries
0x0009 2 31 Transition from drive PhyRdy to drive PhyNRdy
0x000a 2 46 Device-to-host register FISes sent due to a COMRESET
0x000b 2 0 CRC errors within host-to-device FIS
0x000d 2 0 Non-CRC errors within host-to-device FIS
0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC
0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC
Change History (3)
comment:1 by , 3 years ago
| Keywords: | ssd added |
|---|---|
| Milestone: | → Release 7.4 |
| Priority: | major → minor |
comment:2 by , 2 years ago
| Owner: | set to |
|---|---|
| Status: | new → accepted |
Note:
See TracTickets
for help on using tickets.
SM843T(n?) Series.