WD Elements WDBWLG0100HBK-EESN (WDC WD101EMAZ-11G7DA0)

[bigla]

WD Elements 25A3 10TB with Model Name WDBWLG0100HBK-EESN containing WDC WD101EMAZ-11G7DA0

[bigla]

Things I that were unclear for me after reading the FAQ entry :

• I wasn't sure what kind of ticket I should create.
• I am not sure what exactly the correct Model number is, I put the one I found printed on the shipping box.

While the box showed:

P/N:
WDBWLG0100HBK-XB
Model:
WDBWLG0100HBK-EESN

smartctl -a /dev/sdb showed

Vendor:               WD
Product:              Elements 25A3

sudo smartctl -a /dev/sdb -d sat showed

Device Model:     WDC WD101EMAZ-11G7DA0

Let me know how I can improve my contribution.

[TheDragonFire961]

Replying to bigla:

Things I that were unclear for me after reading the FAQ entry :

• I wasn't sure what kind of ticket I should create.
• I am not sure what exactly the correct Model number is, I put the one I found printed on the shipping box.

While the box showed:

P/N:
WDBWLG0100HBK-XB
Model:
WDBWLG0100HBK-EESN

smartctl -a /dev/sdb showed

Vendor:               WD
Product:              Elements 25A3

sudo smartctl -a /dev/sdb -d sat showed

Device Model:     WDC WD101EMAZ-11G7DA0

Let me know how I can improve my contribution.

Looks like your initial smartctl -a /dev/sdb command returned the ID for the bridge, rather than the drive itself, which is what we're interested in. The smartctl -a /dev/sdb -d sat would be the device model we want here.

[Christian Franke]

What is the USB-Id of the device?

Looks like the USB detection did not work here. Normally -d sat should be not needed for WDC USB drives. If no -d is specified and an unknown USB device is detected, smartctl should fail with Unknown USB bridge ... instead of implicitly using -d scsi.

[bigla]

I have to admit, I used a different(=newer) version of smartctl for my initial post (I'll add the Information here later)

This time I am using: smartctl 7.0 2018-12-30 r4883 [x86_64-linux-3.10.0-1160.15.2.el7.x86_64] on CentOS7

smartctl -a /dev/sdb now (correctly?) yields the same as smartctl -a /dev/sdb -d sat:

Device Model:     WDC WD101EMAZ-11G7DA0

On the System (CentOS7) I use for this comment the ID found is:

ID 1058:25a3 Western Digital Technologies, Inc. Elements Desktop (WDBWLG)

[bigla]

Results of older smartctl version.