Add to drivedb: KINGSTON RBU-SNS8180S3/512GJ

[bexx]

Request to add KINGSTON RBU-SNS8180S3. This SSD is based on an industrial product of KINGSTON

​Kingston Industrial Solutions
​Kingston SSD Part Numbers and Specifications

Logs are based on KINGSTON RBU-SNS8180S3/512GJ
Flash Chip: Kingston FB12808UCT1-61
Controller: ???

smartctl.exe -t short /dev/sda
smartctl 7.1 2019-12-30 r5022 [x86_64-w64-mingw32-w10-1909] (sf-7.1-1)
Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF OFFLINE IMMEDIATE AND SELF-TEST SECTION ===
Self-test functions not supported

Sending command: "Execute SMART Short self-test routine immediately in off-line mode".
Command "Execute SMART Short self-test routine immediately in off-line mode" failed: Input/output error

[bexx]

Picture RBU-SNS8180S3/512GJ

[Christian Franke]

Attribute set is a small subset from existing entry Phison Driven SSDs which already matches various KINGSTON S* SSDs.

[bexx]

Thank you for the fast feedback but I don't what are the next steps. Will you add the SSD? Do you require further information or testing from my side?
After serveral hours I didn't manage to display the attributes using the "category" PHison Driven SSDs. Do you require information or testing? If you need further details, I need some support.

[Christian Franke]

• Controller?
• Info about SMART attributes from Vendor?
• Output from Vendor specific SMART tool?

If no further info is available, SSD will be possibly be added to "Phison Driven SSDs" entry. See smartctl -P showall output or drivedb.h​ file.

[bexx]

According to this page ​https://blog.acelaboratory.com/pc-3000-ssd-phison-utility.html
the Kingston CP33238B (visible on the picture) – is a rebranded model of Phison PS3111-S11.

Using the Phison Toolbox from ​https://smartbuy-russia.ru/sundries/download/2368/18344/ i am able to read the smart values (see csv attachment)

SMART Info
ID,Attribute Name,Raw Values
0x09,Power on hours,3675
0x0C,Power on/off cycles,2258
0xA7,Protect Mode,0
0xA8,SATA PHY error count,0
0xAC,Erase Failure Count,0
0xAD,Max Erase Cnt,55
0xAD,Avg Erase Cnt,16
0xB5,Program Fail Count,0
0xBB,UNC Error Count,0
0xC0,Unexpected Power Loss Count,55
0xC2,Current Temp,54
0xC2,Min Temp,21
0xC2,Max Temp,86
0xC4,Total Later Bad Block Count,0
0xDA,CRC Error Count,0
0xE7,SSD life left,99
0xE9,NAND Write (GB),5619
0xF1,Host Write (GB),5693
0xF2,Host Read (GB),4874
0xF4,Avg Erase Count,16
0xF5,Max Erase Count,55
0xF6,Raw Data,0x0000000af9a0

[bexx]

SMART values from Phison Toolbox 1.17 x1

[bexx]

I added the smartctl -x output of the drive again. Does the output 18 month later looks resonable compared to the first log?

[bexx]

22. November 2021 - smartctl -x output

[bexx]

Collection of firmware information of P3111SB ​https://www-usbdev-ru.translate.goog/files/phison/ps3111fw/?_x_tr_sl=ru&_x_tr_tl=en&_x_tr_hl=de&_x_tr_pto=nui,sc

As mentioned in ticket https://www.smartmontools.org/ticket/1136 this can be used to get more information of the drive

[Gabriele Pohl]

This device is included in the patch from #1389

[bexx]

Thank you for the link. This patch works well with my SSD. I hope this find its way into the next release

[Christian Franke]

r5387, r5388, see ticket #1389.