Opened 5 years ago

Last modified 5 years ago

#1310 new defect

WDC WD80EFAX - error badly formed scsi parameters — at Version 1

Reported by: xperry Owned by:
Priority: minor Milestone: undecided
Component: all Version: 7.0
Keywords: linux scsi Cc: petr.rychly@…

Description (last modified by Christian Franke)

This disk is supported but reports "scsi error badly formed scsi parameters""

WDC WD80EFAX-68KNBN0
Firmware Version: 81.00A81

smartctl -x /dev/sde
smartctl 7.0 2018-12-30 r4883 [x86_64-linux-5.3.0-42-generic] (local build)
Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Western Digital Red
Device Model:     WDC WD80EFAX-68KNBN0
Serial Number:    ********
LU WWN Device Id: ******************
Firmware Version: 81.00A81
User Capacity:    8 001 563 222 016 bytes [8,00 TB]
Sector Size:      512 bytes logical/physical
Rotation Rate:    5400 rpm
Form Factor:      3.5 inches
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ACS-2, ATA8-ACS T13/1699-D revision 4
SATA Version is:  SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Fri Mar 27 15:14:48 2020 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is:   Unavailable
APM level is:     164 (intermediate level without standby)
Rd look-ahead is: Enabled
Write cache is:   Enabled
DSN feature is:   Unavailable
ATA Security is:  Disabled, NOT FROZEN [SEC1]
Write SCT (Get) Feature Control Command failed: scsi error badly formed scsi parameters
Wt Cache Reorder: Unknown (SCT Feature Control command failed)

Read SMART Data failed: scsi error badly formed scsi parameters

=== START OF READ SMART DATA SECTION ===
SMART Status command failed: scsi error badly formed scsi parameters
SMART overall-health self-assessment test result: UNKNOWN!
SMART Status, Attributes and Thresholds cannot be read.

Read SMART Log Directory failed: scsi error badly formed scsi parameters

ATA_READ_LOG_EXT (addr=0x00:0x00, page=0, n=1) failed: scsi error badly formed scsi parameters
Read GP Log Directory failed

SMART Extended Comprehensive Error Log (GP Log 0x03) not supported

Read SMART Error Log failed: scsi error badly formed scsi parameters

SMART Extended Self-test Log (GP Log 0x07) not supported

Read SMART Self-test Log failed: scsi error badly formed scsi parameters

Selective Self-tests/Logging not supported

SCT Status Version:                  3
SCT Version (vendor specific):       256 (0x0100)
Device State:                        Active (0)
Current Temperature:                     0 Celsius
Power Cycle Min/Max Temperature:     -3/ 3 Celsius
Lifetime    Min/Max Temperature:      0/ 0 Celsius
Under/Over Temperature Limit Count:   0/0

Write SCT Data Table failed: scsi error badly formed scsi parameters
Read SCT Temperature History failed

Write SCT (Get) Error Recovery Control Command failed: scsi error badly formed scsi parameters
SCT (Get) Error Recovery Control command failed

Device Statistics (GP/SMART Log 0x04) not supported

Pending Defects log (GP Log 0x0c) not supported

ATA_READ_LOG_EXT (addr=0x11:0x00, page=0, n=1) failed: scsi error badly formed scsi parameters
Read SATA Phy Event Counters failed

Change History (2)

by xperry, 5 years ago

Attachment: smartctl-Western Digital WDC WD80EFAX-68KNBN0.txt​ added

output of the smartctl -q noserial -x /dev/sde

comment:1 by Christian Franke, 5 years ago

Description: modified (diff)
Note: See TracTickets for help on using tickets.