Opened 5 years ago
Last modified 5 years ago
#1310 new defect
WDC WD80EFAX - error badly formed scsi parameters — at Initial Version
| Reported by: | xperry | Owned by: | |
|---|---|---|---|
| Priority: | minor | Milestone: | undecided |
| Component: | all | Version: | 7.0 |
| Keywords: | linux scsi | Cc: | petr.rychly@… |
Description
This disk is supported but reports "scsi error badly formed scsi parameters""
WDC WD80EFAX-68KNBN0
Firmware Version: 81.00A81
smartctl -x /dev/sde
smartctl 7.0 2018-12-30 r4883 [x86_64-linux-5.3.0-42-generic] (local build)
Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org
START OF INFORMATION SECTION
Model Family: Western Digital Red
Device Model: WDC WD80EFAX-68KNBN0
Serial Number:
LU WWN Device Id:
Firmware Version: 81.00A81
User Capacity: 8 001 563 222 016 bytes [8,00 TB]
Sector Size: 512 bytes logical/physical
Rotation Rate: 5400 rpm
Form Factor: 3.5 inches
Device is: In smartctl database [for details use: -P show]
ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4
SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Fri Mar 27 15:14:48 2020 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM level is: 164 (intermediate level without standby)
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, NOT FROZEN [SEC1]
Write SCT (Get) Feature Control Command failed: scsi error badly formed scsi parameters
Wt Cache Reorder: Unknown (SCT Feature Control command failed)
Read SMART Data failed: scsi error badly formed scsi parameters
START OF READ SMART DATA SECTION
SMART Status command failed: scsi error badly formed scsi parameters
SMART overall-health self-assessment test result: UNKNOWN!
SMART Status, Attributes and Thresholds cannot be read.
Read SMART Log Directory failed: scsi error badly formed scsi parameters
ATA_READ_LOG_EXT (addr=0x00:0x00, page=0, n=1) failed: scsi error badly formed scsi parameters
Read GP Log Directory failed
SMART Extended Comprehensive Error Log (GP Log 0x03) not supported
Read SMART Error Log failed: scsi error badly formed scsi parameters
SMART Extended Self-test Log (GP Log 0x07) not supported
Read SMART Self-test Log failed: scsi error badly formed scsi parameters
Selective Self-tests/Logging not supported
SCT Status Version: 3
SCT Version (vendor specific): 256 (0x0100)
Device State: Active (0)
Current Temperature: 0 Celsius
Power Cycle Min/Max Temperature: -3/ 3 Celsius
Lifetime Min/Max Temperature: 0/ 0 Celsius
Under/Over Temperature Limit Count: 0/0
Write SCT Data Table failed: scsi error badly formed scsi parameters
Read SCT Temperature History failed
Write SCT (Get) Error Recovery Control Command failed: scsi error badly formed scsi parameters
SCT (Get) Error Recovery Control command failed
Device Statistics (GP/SMART Log 0x04) not supported
Pending Defects log (GP Log 0x0c) not supported
ATA_READ_LOG_EXT (addr=0x11:0x00, page=0, n=1) failed: scsi error badly formed scsi parameters
Read SATA Phy Event Counters failed
Change History (1)
by , 5 years ago
| Attachment: | smartctl-Western Digital WDC WD80EFAX-68KNBN0.txt added |
|---|
output of the smartctl -q noserial -x /dev/sde