1 | C:\>smartctl -a /dev/sdb
|
---|
2 | smartctl 7.4 2023-08-01 r5530 [x86_64-w64-mingw32-w11-22H2] (sf-7.4-1)
|
---|
3 | Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org
|
---|
4 |
|
---|
5 | === START OF INFORMATION SECTION ===
|
---|
6 | Model Family: Swissbit X-8x Family SATA SSD
|
---|
7 | Device Model: SFSA010GM1AO1TO-I-5S-11P-STD
|
---|
8 | Serial Number: 000099005146EF000000
|
---|
9 | Firmware Version: AOR20008
|
---|
10 | User Capacity: 10'012'778'496 bytes [10.0 GB]
|
---|
11 | Sector Size: 512 bytes logical/physical
|
---|
12 | Rotation Rate: Solid State Device
|
---|
13 | TRIM Command: Available, deterministic, zeroed
|
---|
14 | Device is: In smartctl database 7.3/5528
|
---|
15 | ATA Version is: ACS-4 (minor revision not indicated)
|
---|
16 | SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s)
|
---|
17 | Local Time is: Tue Apr 09 10:25:59 2024 MS
|
---|
18 | SMART support is: Available - device has SMART capability.
|
---|
19 | SMART support is: Enabled
|
---|
20 |
|
---|
21 | === START OF READ SMART DATA SECTION ===
|
---|
22 | SMART overall-health self-assessment test result: PASSED
|
---|
23 |
|
---|
24 | General SMART Values:
|
---|
25 | Offline data collection status: (0x00) Offline data collection activity
|
---|
26 | was never started.
|
---|
27 | Auto Offline Data Collection: Disabled.
|
---|
28 | Total time to complete Offline
|
---|
29 | data collection: ( 0) seconds.
|
---|
30 | Offline data collection
|
---|
31 | capabilities: (0x00) Offline data collection not supported.
|
---|
32 | SMART capabilities: (0x0003) Saves SMART data before entering
|
---|
33 | power-saving mode.
|
---|
34 | Supports SMART auto save timer.
|
---|
35 | Error logging capability: (0x00) Error logging supported.
|
---|
36 | General Purpose Logging supported.
|
---|
37 |
|
---|
38 | SMART Attributes Data Structure revision number: 16
|
---|
39 | Vendor Specific SMART Attributes with Thresholds:
|
---|
40 | ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
|
---|
41 | 196 Total_Spare_Block_Cnt 0x0013 100 100 025 Pre-fail Always - 9026142746
|
---|
42 | 213 Spare_Block_Cnt_Worst 0x0013 100 100 025 Pre-fail Always - 9026142746
|
---|
43 | 229 Total_Flash_Block_Erases0x0012 100 100 001 Old_age Always - 0
|
---|
44 | 248 Remaining_Life 0x0002 100 100 000 Old_age Always - 100
|
---|
45 | 9 Power_On_Hours 0x0002 100 100 000 Old_age Always - 0
|
---|
46 | 198 Offline_Uncorrectable 0x001a 100 100 000 Old_age Always - 0
|
---|
47 | 169 Power_On_Data_Repairs 0x001a 100 100 000 Old_age Always - 0
|
---|
48 | 195 Hardware_ECC_Recovered 0x0012 100 100 000 Old_age Always - 0
|
---|
49 | 200 SATA_COM_Reset 0x0012 100 100 000 Old_age Always - 7
|
---|
50 | 168 Rated_Erase_Count 0x0000 100 100 000 Old_age Offline - 20000
|
---|
51 | 167 Average_Erase_Count 0x0012 100 100 000 Old_age Always - 0
|
---|
52 | 165 Maximum_Erase_Count 0x0012 100 100 000 Old_age Always - 1
|
---|
53 | 199 UDMA_CRC_Error_Count 0x001a 100 100 000 Old_age Always - 0
|
---|
54 | 232 Total_Read_Cnt 0x0012 100 100 000 Old_age Always - 1980
|
---|
55 | 12 Power_Cycle_Count 0x0012 100 100 000 Old_age Always - 8
|
---|
56 | 241 Total_Host_LBA_Written 0x0012 100 100 000 Old_age Always - 0
|
---|
57 | 242 Total_Host_LBA_Read 0x0012 100 100 000 Old_age Always - 0
|
---|
58 | 215 Trim_Status 0x0002 100 100 000 Old_age Always - 0
|
---|
59 | 194 Temperature_Celsius 0x0002 028 035 000 Old_age Always - 28 (Min/Max 26/35)
|
---|
60 | 184 End-to-End_Error 0x001a 100 100 000 Old_age Always - 0
|
---|
61 | 185 E2E_ErrCnt_SATA-Flash 0x001a 100 100 000 Old_age Always - 0
|
---|
62 |
|
---|
63 | SMART Error Log Version: 1
|
---|
64 | No Errors Logged
|
---|
65 |
|
---|
66 | SMART Self-test Log not supported
|
---|
67 |
|
---|
68 | Selective Self-tests/Logging not supported
|
---|
69 |
|
---|
70 | The above only provides legacy SMART information - try 'smartctl -x' for more
|
---|