smartctl report about read failure for TOSHIBA THNSNJ256GVNU
Command
smartctl -x -q noserial ..
Some Explanations
Concerning this line: Device is: Not in smartctl database [for details use: -P showall]
See under INFORMATION SECTION. This disk model was not in smartmontools drive db at the time when this report was printed. Therefore it shows Unknown_SSD_Attribute and Unknown_Attribute in some lines of the SMART Attributes Data Structure.
See the following section of our FAQ for more details and an instruction on how you can get a disk added to the database.
Output
smartctl 6.5 2016-05-07 r4318 [i686-w64-mingw32-win7] (sf-6.5-1)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: TOSHIBA THNSNJ256GVNU
Firmware Version: JUTA0101
User Capacity: 256,060,514,304 bytes [256 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: Solid State Device
Form Factor: < 1.8 inches
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: ACS-2 (minor revision not indicated)
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Sun Mar 12 07:35:17 2017 PST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM level is: 254 (maximum performance)
Rd look-ahead is: Enabled
Write cache is: Enabled
ATA Security is: Disabled, frozen [SEC2]
Wt Cache Reorder: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x02) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 112) The previous self-test completed having
the read element of the test failed.
Total time to complete Offline
data collection: ( 120) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 10) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate -O-R-- 099 092 000 - 0
2 Throughput_Performance P-S--- 100 100 050 - 0
3 Spin_Up_Time POS--- 100 100 050 - 0
5 Reallocated_Sector_Ct PO--C- 100 100 050 - 0
7 Unknown_SSD_Attribute PO-R-- 100 100 050 - 0
8 Unknown_SSD_Attribute P-S--- 100 100 050 - 0
9 Power_On_Hours -O--C- 100 100 000 - 438
10 Unknown_SSD_Attribute PO--C- 100 100 050 - 0
12 Power_Cycle_Count -O--C- 100 100 000 - 287
167 Unknown_Attribute -O---K 100 100 000 - 0
168 Unknown_Attribute -O--C- 100 100 000 - 3
169 Unknown_Attribute PO--C- 100 100 010 - 100
170 Unknown_Attribute PO--C- 100 100 010 - 0
173 Unknown_Attribute PO--C- 200 200 100 - 0
175 Program_Fail_Count_Chip PO--C- 100 100 010 - 0
192 Power-Off_Retract_Count -O--C- 100 100 000 - 25
194 Temperature_Celsius -O---K 062 046 000 - 38 (Min/Max 18/54)
197 Current_Pending_Sector -O--C- 100 100 000 - 0
240 Unknown_SSD_Attribute PO--C- 100 100 050 - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 51 Comprehensive SMART error log
0x03 GPL R/O 64 Ext. Comprehensive SMART error log
0x04 GPL,SL R/O 8 Device Statistics log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 1 Extended self-test log
0x09 SL R/W 1 Selective self-test log
0x10 GPL R/O 1 SATA NCQ Queued Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (64 sectors)
Device Error Count: 65535 (device log contains only the most recent 256 errors)
CR = Command Register
FEATR = Features Register
COUNT = Count (was: Sector Count) Register
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
LH = LBA High (was: Cylinder High) Register ] LBA
LM = LBA Mid (was: Cylinder Low) Register ] Register
LL = LBA Low (was: Sector Number) Register ]
DV = Device (was: Device/Head) Register
DC = Device Control Register
ER = Error register
ST = Status register
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 65535 [118] occurred at disk power-on lifetime: 438 hours (18 days + 6 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 f0 00 00 01 8a a7 20 40 00 Error: UNC at LBA = 0x018aa720 = 25863968
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 20 00 a0 00 00 01 d8 eb 8e 40 00 00:00:12.307 READ FPDMA QUEUED
60 00 40 00 98 00 00 02 94 7f fa 40 00 00:00:12.307 READ FPDMA QUEUED
61 00 08 00 90 00 00 1c 46 16 18 40 00 00:00:12.307 WRITE FPDMA QUEUED
60 00 40 00 88 00 00 01 2d 9d 22 40 00 00:00:12.290 READ FPDMA QUEUED
61 00 08 00 80 00 00 00 66 d1 38 40 00 00:00:12.290 WRITE FPDMA QUEUED
Error 65534 [117] occurred at disk power-on lifetime: 438 hours (18 days + 6 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 10 00 00 01 8a a7 20 40 00 Error: WP at LBA = 0x018aa720 = 25863968
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
61 00 08 00 d8 00 00 00 66 d1 40 40 00 00:00:12.183 WRITE FPDMA QUEUED
61 00 48 00 d0 00 00 00 66 d3 30 40 00 00:00:12.183 WRITE FPDMA QUEUED
60 00 08 00 c8 00 00 00 6b 0a 78 40 00 00:00:12.132 READ FPDMA QUEUED
60 00 08 00 c0 00 00 00 a1 e5 10 40 00 00:00:12.100 READ FPDMA QUEUED
61 00 01 00 b8 00 00 00 b8 9d 58 40 00 00:00:12.045 WRITE FPDMA QUEUED
Error 65533 [116] occurred at disk power-on lifetime: 438 hours (18 days + 6 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 48 00 00 01 8a a7 20 40 00 Error: UNC at LBA = 0x018aa720 = 25863968
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 20 00 f0 00 00 02 1c 7a c8 40 00 00:00:11.900 READ FPDMA QUEUED
60 00 08 00 e8 00 00 02 94 87 64 40 00 00:00:11.885 READ FPDMA QUEUED
60 00 08 00 d8 00 00 00 6c 9f 20 40 00 00:00:11.884 READ FPDMA QUEUED
60 00 08 00 d0 00 00 02 7a d3 08 40 00 00:00:11.884 READ FPDMA QUEUED
60 00 40 00 c8 00 00 03 33 4a 20 40 00 00:00:11.884 READ FPDMA QUEUED
Error 65532 [115] occurred at disk power-on lifetime: 438 hours (18 days + 6 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 70 00 00 01 8a a7 20 40 00 Error: UNC at LBA = 0x018aa720 = 25863968
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 03 00 20 00 00 03 1f d5 dd 40 00 00:00:11.859 READ FPDMA QUEUED
60 00 05 00 18 00 00 03 35 3a 00 40 00 00:00:11.545 READ FPDMA QUEUED
60 00 18 00 10 00 00 03 33 5d 15 40 00 00:00:11.529 READ FPDMA QUEUED
60 00 08 00 08 00 00 00 68 ea 10 40 00 00:00:11.528 READ FPDMA QUEUED
60 00 08 00 00 00 00 02 4d 3f b8 40 00 00:00:11.527 READ FPDMA QUEUED
Error 65531 [114] occurred at disk power-on lifetime: 438 hours (18 days + 6 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 30 00 00 01 8a a7 20 40 00 Error: UNC at LBA = 0x018aa720 = 25863968
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 40 00 00 00 00 01 73 07 d2 40 00 00:00:11.463 READ FPDMA QUEUED
60 00 b4 00 f8 00 00 01 e1 6b 60 40 00 00:00:11.462 READ FPDMA QUEUED
60 00 08 00 f0 00 00 02 1c 77 20 40 00 00:00:11.462 READ FPDMA QUEUED
60 00 08 00 e0 00 00 00 6a 14 30 40 00 00:00:11.462 READ FPDMA QUEUED
60 00 08 00 c8 00 00 03 01 01 00 40 00 00:00:11.462 READ FPDMA QUEUED
Error 65530 [113] occurred at disk power-on lifetime: 438 hours (18 days + 6 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 20 00 00 01 8a a7 20 40 00 Error: UNC at LBA = 0x018aa720 = 25863968
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 20 00 28 00 00 03 33 5f 75 40 00 00:00:11.430 READ FPDMA QUEUED
60 00 40 00 18 00 00 00 21 f6 92 40 00 00:00:11.430 READ FPDMA QUEUED
60 00 20 00 10 00 00 01 2d bb 28 40 00 00:00:11.229 READ FPDMA QUEUED
60 00 40 00 08 00 00 01 73 05 e0 40 00 00:00:11.122 READ FPDMA QUEUED
60 00 40 00 00 00 00 00 3d 9d 60 40 00 00:00:11.122 READ FPDMA QUEUED
Error 65529 [112] occurred at disk power-on lifetime: 438 hours (18 days + 6 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 f8 00 00 01 8a a7 20 40 00 Error: UNC at LBA = 0x018aa720 = 25863968
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 40 00 10 00 00 01 25 a3 a2 40 00 00:00:15.867 READ FPDMA QUEUED
60 00 80 00 08 00 00 01 93 63 88 40 00 00:00:15.850 READ FPDMA QUEUED
60 00 08 00 00 00 00 00 6c c4 48 40 00 00:00:15.850 READ FPDMA QUEUED
60 00 08 00 f8 00 00 01 8a a7 20 40 00 00:00:15.850 READ FPDMA QUEUED
60 00 18 00 f0 00 00 01 25 60 1a 40 00 00:00:15.850 READ FPDMA QUEUED
Error 65528 [111] occurred at disk power-on lifetime: 438 hours (18 days + 6 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 70 00 00 01 8a a7 20 40 00 Error: UNC at LBA = 0x018aa720 = 25863968
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 03 00 d8 00 00 00 f6 92 b7 40 00 00:00:15.821 READ FPDMA QUEUED
60 00 08 00 d0 00 00 01 93 63 80 40 00 00:00:15.821 READ FPDMA QUEUED
60 00 28 00 c8 00 00 04 dc 35 3a 40 00 00:00:15.821 READ FPDMA QUEUED
60 00 20 00 c0 00 00 01 25 ac 13 40 00 00:00:15.621 READ FPDMA QUEUED
61 00 01 00 b8 00 00 00 22 fc f8 40 00 00:00:15.587 WRITE FPDMA QUEUED
SMART Extended Self-test Log Version: 1 (1 sectors)
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed: read failure 00% 406 635416
# 2 Short offline Completed without error 00% 371 -
# 3 Short offline Completed without error 00% 274 -
# 4 Short offline Completed without error 00% 202 -
# 5 Short offline Completed without error 00% 109 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 3
SCT Version (vendor specific): 3 (0x0003)
SCT Support Level: 0
Device State: Active (0)
Current Temperature: 38 Celsius
Power Cycle Min/Max Temperature: 24/38 Celsius
Lifetime Min/Max Temperature: 18/54 Celsius
Under/Over Temperature Limit Count: 0/0
Vendor specific:
00 00 04 00 01 01 00 05 05 00 00 00 00 00 00 00
00 01 00 00 f4 13 18 00 02 02 00 00 00 00 00 06
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 1 minute
Min/Max recommended Temperature: 5/40 Celsius
Min/Max Temperature Limit: 0/80 Celsius
Temperature History Size (Index): 128 (0)
Index Estimated Time Temperature Celsius
1 2017-03-12 05:28 43 ************************
... ..(112 skipped). .. ************************
114 2017-03-12 07:21 43 ************************
115 2017-03-12 07:22 ? -
116 2017-03-12 07:23 27 ********
117 2017-03-12 07:24 ? -
... ..( 2 skipped). .. -
120 2017-03-12 07:27 ? -
121 2017-03-12 07:28 32 *************
122 2017-03-12 07:29 34 ***************
123 2017-03-12 07:30 35 ****************
124 2017-03-12 07:31 36 *****************
125 2017-03-12 07:32 37 ******************
126 2017-03-12 07:33 37 ******************
127 2017-03-12 07:34 38 *******************
0 2017-03-12 07:35 38 *******************
SCT Error Recovery Control:
Read: 600 (60.0 seconds)
Write: 600 (60.0 seconds)
Device Statistics (GP Log 0x04)
Page Offset Size Value Flags Description
0x01 ===== = = === == General Statistics (rev 2) ==
0x01 0x008 4 287 --- Lifetime Power-On Resets
0x01 0x018 6 1480544217 --- Logical Sectors Written
0x01 0x020 6 24980205 --- Number of Write Commands
0x01 0x028 6 1579365109 --- Logical Sectors Read
0x01 0x030 6 27722663 --- Number of Read Commands
0x04 ===== = = === == General Errors Statistics (rev 1) ==
0x04 0x008 4 132980 --- Number of Reported Uncorrectable Errors
0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion
0x05 ===== = = === == Temperature Statistics (rev 1) ==
0x05 0x008 1 38 --- Current Temperature
0x05 0x010 1 30 --- Average Short Term Temperature
0x05 0x018 1 - --- Average Long Term Temperature
0x05 0x020 1 52 --- Highest Temperature
0x05 0x028 1 23 --- Lowest Temperature
0x05 0x030 1 41 --- Highest Average Short Term Temperature
0x05 0x038 1 25 --- Lowest Average Short Term Temperature
0x05 0x040 1 - --- Highest Average Long Term Temperature
0x05 0x048 1 - --- Lowest Average Long Term Temperature
0x05 0x050 4 1400 --- Time in Over-Temperature
0x05 0x058 1 40 --- Specified Maximum Operating Temperature
0x05 0x060 4 0 --- Time in Under-Temperature
0x05 0x068 1 5 --- Specified Minimum Operating Temperature
0x06 ===== = = === == Transport Statistics (rev 1) ==
0x06 0x008 4 673 --- Number of Hardware Resets
0x06 0x018 4 3 --- Number of Interface CRC Errors
0x07 ===== = = === == Solid State Device Statistics (rev 1) ==
0x07 0x008 1 0 N-- Percentage Used Endurance Indicator
|||_ C monitored condition met
||__ D supports DSN
|___ N normalized value
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 2 0 Command failed due to ICRC error
0x0002 4 0 R_ERR response for data FIS
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0005 4 0 R_ERR response for non-data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
0x0008 2 0 Device-to-host non-data FIS retries
0x0009 4 4 Transition from drive PhyRdy to drive PhyNRdy
0x000a 4 5 Device-to-host register FISes sent due to a COMRESET
0x000b 4 0 CRC errors within host-to-device FIS
0x000d 4 0 Non-CRC errors within host-to-device FIS
0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC
0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC
License
Permission is granted to copy, distribute and/or modify this document under the terms of the GNU Free Documentation License, Version 1.3 or any later version published by the Free Software Foundation;
For an online copy of the license see https://www.gnu.org/licenses/fdl.html
Last modified
8 years ago
Last modified on Apr 11, 2017, 12:15:08 AM
Note:
See TracWiki
for help on using the wiki.
