| | 1 | == smartctl report for EG0146FAWHU == |
| | 2 | |
| | 3 | === Command === |
| | 4 | |
| | 5 | Access via HP Smart Array controller: {{{smartctl -d cciss,3 -q noserial -x /dev/sda}}} |
| | 6 | |
| | 7 | |
| | 8 | === Output === |
| | 9 | |
| | 10 | {{{ |
| | 11 | smartctl 5.43 2012-06-30 r3573 [x86_64-linux-2.6.32-642.13.1.el6.centos.plus.x86_64] (local build) |
| | 12 | Copyright (C) 2002-12 by Bruce Allen, http://smartmontools.sourceforge.net |
| | 13 | |
| | 14 | /dev/sda [cciss_disk_03] [SCSI]: Device open changed type from 'sat,auto' to 'cciss' |
| | 15 | Vendor: HP |
| | 16 | Product: EG0146FAWHU |
| | 17 | Revision: HPDF |
| | 18 | User Capacity: 146,815,737,856 bytes [146 GB] |
| | 19 | Logical block size: 512 bytes |
| | 20 | Device type: disk |
| | 21 | Transport protocol: SAS |
| | 22 | Local Time is: Sun Mar 19 13:23:31 2017 CET |
| | 23 | Device supports SMART and is Enabled |
| | 24 | Temperature Warning Enabled |
| | 25 | SMART Health Status: OK |
| | 26 | |
| | 27 | Current Drive Temperature: 39 C |
| | 28 | Drive Trip Temperature: 65 C |
| | 29 | Elements in grown defect list: 2 |
| | 30 | Vendor (Seagate) cache information |
| | 31 | Blocks sent to initiator = 1616406451 |
| | 32 | Blocks received from initiator = 2528545986 |
| | 33 | Blocks read from cache and sent to initiator = 4134560162 |
| | 34 | Number of read and write commands whose size <= segment size = 1108615172 |
| | 35 | Number of read and write commands whose size > segment size = 0 |
| | 36 | Vendor (Seagate/Hitachi) factory information |
| | 37 | number of hours powered up = 55491.72 |
| | 38 | number of minutes until next internal SMART test = 8 |
| | 39 | |
| | 40 | Error counter log: |
| | 41 | Errors Corrected by Total Correction Gigabytes Total |
| | 42 | ECC rereads/ errors algorithm processed uncorrected |
| | 43 | fast | delayed rewrites corrected invocations [10^9 bytes] errors |
| | 44 | read: 0 9 0 3457984800 0 427330.737 0 |
| | 45 | write: 0 0 0 0 0 3560.808 0 |
| | 46 | |
| | 47 | Non-medium error count: 48 |
| | 48 | |
| | 49 | SMART Self-test log |
| | 50 | Num Test Status segment LifeTime LBA_first_err [SK ASC ASQ] |
| | 51 | Description number (hours) |
| | 52 | # 1 Background short Completed - 46843 - [- - -] |
| | 53 | # 2 Background short Completed - 46819 - [- - -] |
| | 54 | # 3 Background short Completed - 46795 - [- - -] |
| | 55 | # 4 Background long Completed - 46773 - [- - -] |
| | 56 | # 5 Background short Completed - 46771 - [- - -] |
| | 57 | # 6 Background short Completed - 46747 - [- - -] |
| | 58 | # 7 Background short Completed - 46723 - [- - -] |
| | 59 | # 8 Background short Completed - 46699 - [- - -] |
| | 60 | # 9 Background short Completed - 46675 - [- - -] |
| | 61 | #10 Background short Completed - 46651 - [- - -] |
| | 62 | #11 Background short Completed - 46627 - [- - -] |
| | 63 | #12 Background long Completed - 46605 - [- - -] |
| | 64 | #13 Background short Completed - 46603 - [- - -] |
| | 65 | #14 Background short Completed - 46579 - [- - -] |
| | 66 | #15 Background short Completed - 46555 - [- - -] |
| | 67 | #16 Background short Completed - 46531 - [- - -] |
| | 68 | #17 Background short Completed - 46507 - [- - -] |
| | 69 | #18 Background short Completed - 46483 - [- - -] |
| | 70 | #19 Background short Completed - 46459 - [- - -] |
| | 71 | #20 Background long Completed - 46437 - [- - -] |
| | 72 | |
| | 73 | Long (extended) Self Test duration: 1570 seconds [26.2 minutes] |
| | 74 | |
| | 75 | Background scan results log |
| | 76 | Status: waiting until BMS interval timer expires |
| | 77 | Accumulated power on time, hours:minutes 55491:43 [3329503 minutes] |
| | 78 | Number of background scans performed: 2152, scan progress: 0.00% |
| | 79 | Number of background medium scans performed: 2152 |
| | 80 | |
| | 81 | # when lba(hex) [sk,asc,ascq] reassign_status |
| | 82 | 33024 21708:31 0008012701180900 [f,3,7e] Reserved [0x0] |
| | 83 | 33025 34882:38 0008012401180900 [f,1,56] Reserved [0x0] |
| | 84 | 33026 41201:47 0008012b01180900 [f,fe,ab] Reserved [0x0] |
| | 85 | Protocol Specific port log page for SAS SSP |
| | 86 | relative target port id = 1 |
| | 87 | generation code = 0 |
| | 88 | number of phys = 1 |
| | 89 | phy identifier = 0 |
| | 90 | attached device type: end device |
| | 91 | attached reason: unknown |
| | 92 | reason: hard reset |
| | 93 | negotiated logical link rate: phy enabled; 6 Gbps |
| | 94 | attached initiator port: ssp=1 stp=1 smp=1 |
| | 95 | attached target port: ssp=0 stp=0 smp=0 |
| | 96 | SAS address = 0x5000c5002bdd5c6d |
| | 97 | attached SAS address = 0x5001438009600560 |
| | 98 | attached phy identifier = 3 |
| | 99 | Invalid DWORD count = 0 |
| | 100 | Running disparity error count = 0 |
| | 101 | Loss of DWORD synchronization = 29271 |
| | 102 | Phy reset problem = 0 |
| | 103 | Phy event descriptors: |
| | 104 | Invalid word count: 0 |
| | 105 | Running disparity error count: 0 |
| | 106 | Loss of dword synchronization count: 29271 |
| | 107 | Phy reset problem count: 0 |
| | 108 | relative target port id = 2 |
| | 109 | generation code = 0 |
| | 110 | number of phys = 1 |
| | 111 | phy identifier = 1 |
| | 112 | attached device type: no device attached |
| | 113 | attached reason: unknown |
| | 114 | reason: unknown |
| | 115 | negotiated logical link rate: phy enabled; 1.5 Gbps |
| | 116 | attached initiator port: ssp=0 stp=0 smp=0 |
| | 117 | attached target port: ssp=0 stp=0 smp=0 |
| | 118 | SAS address = 0x5000c5002bdd5c6e |
| | 119 | attached SAS address = 0x0 |
| | 120 | attached phy identifier = 0 |
| | 121 | Invalid DWORD count = 0 |
| | 122 | Running disparity error count = 0 |
| | 123 | Loss of DWORD synchronization = 0 |
| | 124 | Phy reset problem = 0 |
| | 125 | Phy event descriptors: |
| | 126 | Invalid word count: 0 |
| | 127 | Running disparity error count: 0 |
| | 128 | Loss of dword synchronization count: 0 |
| | 129 | Phy reset problem count: 0 |
| | 130 | }}} |
