Changes between Version 1 and Version 2 of AttributesWestern-Digital


Ignore:
Timestamp:
Oct 18, 2009, 6:42:50 PM (15 years ago)
Author:
Gabriele Pohl
Comment:

Merge with Wikipedia Talk page about WDC S.M.A.R.T. Attributes. Thanks to Franc Zabkar for the hint: ​https://sourceforge.net/mailarchive/message.php?msg_name=1255789100_3060%40mail.internode.on.net

Legend:

Unmodified
Added
Removed
Modified

  • AttributesWestern-Digital

    v1 v2  
    99||   || 5 || Reallocated Sector Count ||   || Quantity of remapped sectors. ||
    1010||   || 6 || Start/Stop Count ||   || Number of start/stop cycles of spindle. ||
     11||   || ? || Read Channel Margin ||   || Margin of a channel while reading data. The function of this attribute is not specified.||
    1112||   || 7 || Seek Error Rate ||   || Frequency of errors appearance while positioning. ||
    1213||   || 8 || Seek Time Performance ||   || The average efficiency of operations while positioning. ||
    … …  
    2122||   || 12 || Power Cycle Count ||   || Number of complete power on/off cycles of hard disk. ||
    2223||   || 13 || Soft Read Error Rate ||   || Frequency of program errors appearance while reading data from a disk. ||
    23 || ''<unknown>'' || 192 || Power-Off Retract Cycle ||   || Number of power-off cycles. ||
     24||   || 184 || End to End Error Count ||   || This attribute is a part of HP's SMART IV technology and it means that after transferring through the cache RAM data buffer the parity data between the host and the hard drive did not match. ||
     25||   || 185 (?) || Head Stability ||   || (?) ||
     26||   || 186 (?) || Induced Op-Vibration Detection ||   || (?) ||
     27||   || 187 || Reported Uncorrectable Errors ||   || A number of errors that could not be recovered using hardware ECC (see attribute 195). ||
     28||   || 188 || Command Timeout ||   || A number of aborted operations due to HDD timeout. Normally this attribute value should be equal to zero and if you have values far above zero, then most likely you have some serious problems with your power supply or you have an oxidized data cable. ||
     29|| WDE18300, WDE9180 Ultra2 SCSI hard drives and future WD Enterprise products ^[#footnote_hfw 1]^  || 189 || High Fly Writes ||   || HDD producers implement a Fly Height Monitor that attempts to provide additional protections for write operations by detecting when a recording head is flying outside its normal operating range. If an unsafe fly height condition is encountered, the write process is stopped, and the information is rewritten or reallocated to a safe region of the hard drive. This attribute indicates the count of these errors detected over the lifetime of the drive. ||
     30||   || 190 || Airflow Temperature (WDC) ||   || Airflow temperature (Same as temp. [C2], but current value is 50 less for some models. Marked as obsolete.) ||
     31||   || 191 || G-sense error rate ||   || The number of errors resulting from externally-induced shock & vibration. (Also in Attribute ID 221) ||
     32||   || 192 || Emergency Retract Count ||   || Number of times the heads are loaded off the media. ||
    2433||   || 193 || Load/Unload Cycle Count ||   || Number of cycles into Landing Zone position. ||
    2534|| not all (which?) || 194 || HDA Temperature ||   || Temperature of a Hard Disk Assembly. ||
    2635|| ''<unknown>'' || 195 || Hardware ECC Recovered ||   || Frequency of the on the fly errors. ||
    27 || not all (which?) || 196 || Reallocated Event Count ||   || Number of remap operations. That means replacing a bad sector by one from the spare area. ||
     36|| not all (which?) || 196 || Relocation Event Count ||   || Number of remap operations. That means replacing a bad sector by one from the spare area. ||
    2837||   || 197 || Current Pending Sector Count ||   || Current number of unstable sectors (waiting for remapping). ||
    29 || ''<unknown>'' || 198 || Offline Scan Uncorrectable Count ||   || Number of uncorrected errors. ||
     38|| ''<unknown>'' || 198 || Offline Uncorrectable Sector Count ||   || Number of uncorrected errors. ||
    3039||   ||   ||   ||   ||   ||
    3140|| not all (which?) || '''199''' || '''UltraDMA CRC Error Rate''' || (!) || Total number of errors CRC during UltraDMA mode. ||
    3241||   ||   |||||| ''Western Digital firmware initializes SMART Attribute 199 after either 120 spin-ups or 8 power-on hours. Until that time, they have the uninitialized value 253.'' ||
    3342||   ||   ||   ||   ||   ||
    34 ||   || 200 || Write Error Rate ||   || Multi Zone Error Rate. ||
     43||   || 200 || Multi Zone Error Rate ||   || Multi Zone Error Rate. ||
    3544||   || 201 || Soft Read Error Rate ||   || Frequency of program errors appearance while reading data from a disk. ||
    3645|| ''<unknown>'' || 202 || Data Address Mark Errors ||   || Number of Data Address Mark (DAM) errors (or) vendor-specific. ||
    … …  
    4150|| ''<unknown>'' || 207 || Spin High Current ||   || Amount of high current used to spin up the drive. ||
    4251|| ''<unknown>'' || 208 || Spin Buzz ||   || Number of buzz routines to spin up the drive. ||
    43 || ''<unknown>'' || 209 || Offline Seek Performance ||   || Drive's seek performance during offline operations. (Relation to Seek Time Performance - #8?) ||
     52|| ''<unknown>'' || 209 || Offline Seek Performance ||   || Drive's seek performance during offline operations. (Relation to Seek Time Performance? => ID 8) ||
    4453|| ''<unknown>'' || 220 || Disk Shift ||   || Shift of disk is possible as a result of strong shock loading in the store, as a result of it's falling or for other reasons (sometimes: Temperature) ||
    4554|| ''<unknown>'' || 221 || G-Sense Error Rate ||   || Frequency of mistakes as a result of impact loads as detected by a shock sensor(?). ||
    … …  
    5059|| ''<unknown>'' || 226 || Load-in Time ||   || General time of loading for drive. ||
    5160|| ''<unknown>'' || 227 || Torque Amplification Count ||   || Quantity efforts of the rotating moment of a drive. ||
    52 || ''<unknown>'' || 228 || Power-Off Retract Cycle ||   || Number of power-off cycles (Fujitsu: Emergency Retract Cycle Count). ||
    53 || ''<unknown>'' || 230 || GMR Head Amplitude ||   || Amplitude of heads trembling (GMR-head) in running mode. ||
     61|| ''<unknown>'' || 228 || Power-Off Retract Count ||   || Number of power-off cycles (Fujitsu: Emergency Retract Cycle Count). ||
     62|| ''<unknown>'' || 230 || GMR Head Amp ||   || Amplitude of heads trembling (GMR-head) in running mode. ||
    5463|| ''<unknown>'' || 231 || Temperature ||   || Temperature of a drive. ||
    5564|| ''<unknown>'' || 240 || Head Flying Hours ||   || Time while head is positioning. ||
    5665|| ''<unknown>'' || 250 || Read Error Retry Rate ||   || Number of errors while reading from a disk. ||
    5766
    58 '''References:''' http://www.ariolic.com/activesmart/smart-attributes/
     67'''Footnotes:'''
     68{{{
     69#!html
     70<a name="footnote_hfw">1.</a> <a href="http://www.wdc.com/en/library/2579-850123.pdf" target="_blank">Fly Height Monitor Improves Hard Drive Reliability</a>, Western Digital, April 1999, 79-850123-000
     71}}}
     72
     73'''References:'''
     74
     75http://www.ariolic.com/activesmart/smart-attributes/
     76
     77http://en.wikipedia.org/wiki/S.M.A.R.T.
     78
     79http://en.wikipedia.org/wiki/Talk:S.M.A.R.T.#Attributes_185_.26_186_.28WDC.29