ST3160316AS not is not in the database

[ysha]

Hi, ST3160316AS HDD is not in the database of smartmontools 6.5, see attached file.

#smartctl -q noserial -x /dev/sdX > /tmp/smartctl-VENDOR-MODEL.txt

---

smartctl 6.5 2016-05-07 r4318 [FreeBSD 9.3-RELEASE-p53 amd64] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

START OF INFORMATION SECTION

Device Model: ST3160316AS
Firmware Version: JC45
User Capacity: 160 041 885 696 bytes [160 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: 7200 rpm
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: ATA8-ACS T13/1699-D revision 4
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is: Wed Oct 4 08:56:43 2017 GMT-7
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM level is: 208 (intermediate), recommended: 208
APM feature is: Unavailable
Rd look-ahead is: Enabled
Write cache is: Enabled
ATA Security is: Disabled, NOT FROZEN [SEC1]
Wt Cache Reorder: Unknown

START OF READ SMART DATA SECTION

SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status: (0x82) Offline data collection activity

was completed without error.
Auto Offline Data Collection: Enabled.

Self-test execution status: ( 0) The previous self-test routine completed

without error or no self-test has ever
been run.

Total time to complete Offline
data collection: ( 625) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.

Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.

SMART capabilities: (0x0003) Saves SMART data before entering

power-saving mode.
Supports SMART auto save timer.

Error logging capability: (0x01) Error logging supported.

General Purpose Logging supported.

Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 33) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x103f) SCT Status supported.

SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.

SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE

1 Raw_Read_Error_Rate POSR-- 112 099 006 - 44327435
3 Spin_Up_Time PO---- 100 100 000 - 0
4 Start_Stop_Count -O--CK 100 100 020 - 14
5 Reallocated_Sector_Ct PO--CK 100 100 036 - 0
7 Seek_Error_Rate POSR-- 100 253 030 - 59404
9 Power_On_Hours -O--CK 100 100 000 - 15

10 Spin_Retry_Count PO--C- 100 100 097 - 0
12 Power_Cycle_Count -O--CK 100 100 020 - 14

183 Runtime_Bad_Block -O--CK 100 100 000 - 0
184 End-to-End_Error -O--CK 100 100 099 - 0
187 Reported_Uncorrect -O--CK 100 100 000 - 0
188 Command_Timeout -O--CK 100 098 000 - 8590065666
189 High_Fly_Writes -O-RCK 100 100 000 - 0
190 Airflow_Temperature_Cel -O---K 070 052 045 - 30 (Min/Max 24/30)
194 Temperature_Celsius -O---K 030 048 000 - 30 (0 24 0 0 0)
195 Hardware_ECC_Recovered -O-RC- 055 048 000 - 44327435
197 Current_Pending_Sector -O--C- 100 100 000 - 0
198 Offline_Uncorrectable ----C- 100 100 000 - 0
199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0
240 Head_Flying_Hours ------ 100 253 000 - 40 (167 19 0)
241 Total_LBAs_Written ------ 100 253 000 - 326085595
242 Total_LBAs_Read ------ 100 253 000 - 964176949

_ K auto-keep

| C event count

_ R error rate

| S speed/performance

_ O updated online

| P prefailure warning

General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 GPL,SL R/O 1 Summary SMART error log
0x02 GPL,SL R/O 5 Comprehensive SMART error log
0x03 GPL R/O 5 Ext. Comprehensive SMART error log
0x06 GPL,SL R/O 1 SMART self-test log
0x07 GPL R/O 1 Extended self-test log
0x09 GPL,SL R/W 1 Selective self-test log
0x10 GPL R/O 1 SATA NCQ Queued Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x21 GPL R/O 1 Write stream error log
0x22 GPL R/O 1 Read stream error log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xa1 GPL,SL VS 20 Device vendor specific log
0xa2 GPL VS 2248 Device vendor specific log
0xa8 GPL,SL VS 129 Device vendor specific log
0xa9 GPL,SL VS 1 Device vendor specific log
0xb0 GPL VS 2928 Device vendor specific log
0xbd GPL VS 252 Device vendor specific log
0xbe-0xbf GPL VS 65535 Device vendor specific log
0xc0 GPL,SL VS 1 Device vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer

SMART Extended Comprehensive Error Log Version: 1 (5 sectors)
No Errors Logged

SMART Extended Self-test Log Version: 1 (1 sectors)
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 15 -
# 2 Short offline Completed without error 00% 15 -

SMART Selective self-test log data structure revision number 1

SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS

1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing

Selective self-test flags (0x0):

After scanning selected spans, do NOT read-scan remainder of disk.

If Selective self-test is pending on power-up, resume after 0 minute delay.

SCT Status Version: 3
SCT Version (vendor specific): 522 (0x020a)
SCT Support Level: 1
Device State: Active (0)
Current Temperature: 30 Celsius
Power Cycle Min/Max Temperature: 24/30 Celsius
Lifetime Min/Max Temperature: 24/48 Celsius
Under/Over Temperature Limit Count: 0/0

SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 59 minutes
Min/Max recommended Temperature: 14/55 Celsius
Min/Max Temperature Limit: 10/60 Celsius
Temperature History Size (Index): 128 (42)

Index Estimated Time Temperature Celsius

43 2017-09-29 03:38 ? -

... ..( 83 skipped). .. -
127 2017-10-02 14:14 ? -

0 2017-10-02 15:13 48 *
1 2017-10-02 16:12 ? -
2 2017-10-02 17:11 48 *
3 2017-10-02 18:10 ? -
4 2017-10-02 19:09 48 *
5 2017-10-02 20:08 ? -
6 2017-10-02 21:07 48 *
7 2017-10-02 22:06 ? -
8 2017-10-02 23:05 26 *
9 2017-10-03 00:04 ? -

10 2017-10-03 01:03 27
11 2017-10-03 02:02 ? -
12 2017-10-03 03:01 31
13 2017-10-03 04:00 ? -
14 2017-10-03 04:59 32 *
15 2017-10-03 05:58 ? -
16 2017-10-03 06:57 32 *

... ..( 4 skipped). .. *

21 2017-10-03 11:52 32 *
22 2017-10-03 12:51 ? -
23 2017-10-03 13:50 28 *
24 2017-10-03 14:49 28 *
25 2017-10-03 15:48 32 *
26 2017-10-03 16:47 ? -
27 2017-10-03 17:46 32 *
28 2017-10-03 18:45 ? -
29 2017-10-03 19:44 32 *
30 2017-10-03 20:43 32 *
31 2017-10-03 21:42 ? -
32 2017-10-03 22:41 31
33 2017-10-03 23:40 31
34 2017-10-04 00:39 32 *
35 2017-10-04 01:38 31
36 2017-10-04 02:37 31
37 2017-10-04 03:36 ? -
38 2017-10-04 04:35 31
39 2017-10-04 05:34 ? -
40 2017-10-04 06:33 24 *
41 2017-10-04 07:32 24 *
42 2017-10-04 08:31 30 *

SCT Error Recovery Control:

Read: Disabled

Write: Disabled

Device Statistics (GP/SMART Log 0x04) not supported

SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x000a 2 6 Device-to-host register FISes sent due to a COMRESET
0x0001 2 0 Command failed due to ICRC error
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS

---