Smartctl version 6.5 not showing all intel raid disk when scan on Windows 7 64bit

[Zulkefli Aris]

C:\>smartctl --scan
/dev/sda -d scsi # /dev/sda, SCSI device
/dev/csmi2,0 -d ata # /dev/csmi2,0, ATA device

C:\>smartctl -a /dev/sda
smartctl 6.5 2016-05-07 r4318 [i686-w64-mingw32-win7(64)-sp1] (sf-6.5-1)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

START OF INFORMATION SECTION

Vendor: Intel
Product: Raid 1 Volume
Revision: 1.0.
User Capacity: 500,105,547,264 bytes [500 GB]
Logical block size: 512 bytes
LU is fully provisioned
Rotation Rate: 5400 rpm
Logical Unit id: 0x785a2d5700000000001517ffff0aeb84
Serial number: OutletSVR
Device type: disk
Local Time is: Wed Feb 08 09:05:58 2017 MPST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
Temperature Warning: Disabled or Not Supported

START OF READ SMART DATA SECTION

SMART Health Status: OK
Current Drive Temperature: 0 C
Drive Trip Temperature: 0 C

Error Counter logging not supported

Device does not support Self Test logging

C:\>smartctl -a /dev/csmi2,0 -d ata
smartctl 6.5 2016-05-07 r4318 [i686-w64-mingw32-win7(64)-sp1] (sf-6.5-1)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

START OF INFORMATION SECTION

Model Family: Toshiba 2.5" HDD MQ01ABF...
Device Model: TOSHIBA MQ01ABF050
Serial Number: 66R8P3FJT
LU WWN Device Id: 5 000039 71250ad18
Firmware Version: AM0P2A
User Capacity: 500,107,862,016 bytes [500 GB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 5400 rpm
Form Factor: 2.5 inches
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS (minor revision not indicated)
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Wed Feb 08 09:07:19 2017 MPST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

START OF READ SMART DATA SECTION

SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status: (0x00) Offline data collection activity

was never started.
Auto Offline Data Collection: Disabled.

Self-test execution status: ( 0) The previous self-test routine completed

without error or no self-test has ever
been run.

Total time to complete Offline
data collection: ( 120) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.

Auto Offline data collection on/off supp

ort.

Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.

SMART capabilities: (0x0003) Saves SMART data before entering

power-saving mode.
Supports SMART auto save timer.

Error logging capability: (0x01) Error logging supported.

General Purpose Logging supported.

Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 123) minutes.
SCT capabilities: (0x003d) SCT Status supported.

SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_
FAILED RAW_VALUE

1 Raw_Read_Error_Rate 0x000b 100 100 050 Pre-fail Always -

0

2 Throughput_Performance 0x0005 100 100 050 Pre-fail Offline -

0

3 Spin_Up_Time 0x0027 100 100 001 Pre-fail Always -

1394

4 Start_Stop_Count 0x0032 100 100 000 Old_age Always -

17

5 Reallocated_Sector_Ct 0x0033 100 100 050 Pre-fail Always -

0

7 Seek_Error_Rate 0x000b 100 100 050 Pre-fail Always -

0

8 Seek_Time_Performance 0x0005 100 100 050 Pre-fail Offline -

0

9 Power_On_Hours 0x0032 100 100 000 Old_age Always -

14

10 Spin_Retry_Count 0x0033 100 100 030 Pre-fail Always -

0

12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always -

16

191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always -

0

192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always -

4

193 Load_Cycle_Count 0x0032 100 100 000 Old_age Always -

164

194 Temperature_Celsius 0x0022 100 100 000 Old_age Always -

28 (Min/Max 21/33)

196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always -

0

197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always -

0

198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline -

0

199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always -

0

220 Disk_Shift 0x0002 100 100 000 Old_age Always -

0

222 Loaded_Hours 0x0032 100 100 000 Old_age Always -

13

223 Load_Retry_Count 0x0032 100 100 000 Old_age Always -

0

224 Load_Friction 0x0022 100 100 000 Old_age Always -

0

226 Load-in_Time 0x0026 100 100 000 Old_age Always -

250

240 Head_Flying_Hours 0x0001 100 100 001 Pre-fail Offline -

0

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]

SMART Selective self-test log data structure revision number 1

SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS

1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing

Selective self-test flags (0x0):

After scanning selected spans, do NOT read-scan remainder of disk.

If Selective self-test is pending on power-up, resume after 0 minute delay.

C:\>smartctl -r ioctl,2 -d csmi --scan

.\Scsi0

successfully opened IOCTL_SCSI_MINIPORT(CC_CSMI_1) failed, Error=1

.\Scsi1

successfully opened IOCTL_SCSI_MINIPORT(CC_CSMI_1) failed, Error=1

.\Scsi2

successfully opened IOCTL_SCSI_MINIPORT(CC_CSMI_1) succeeded, bytes returned: 204

CSMI_SAS_DRIVER_INFO:

Name: "iaStorA"
Description: "Intel(R) Rapid Storage Technology "
Revision: 15.2
IOCTL_SCSI_MINIPORT(CC_CSMI_20) succeeded, bytes returned: 2080

CSMI_SAS_PHY_INFO: NumberOfPhys=6
Phy[0] Port: 0x00

Type: 0x10, 0x10
InitProto: 0x01, 0x00
TargetProto: 0x00, 0x01
PhyIdent: 0x00, 0x00
SASAddress: 00 00 00 00 00 00 00 00, 00 00 00 00 00 00 00 00

Phy[1] Port: 0x00

Type: 0x10, 0x10
InitProto: 0x01, 0x00
TargetProto: 0x00, 0x01
PhyIdent: 0x01, 0x01
SASAddress: 00 00 00 00 00 00 00 00, 00 01 00 00 00 00 00 00

Phy[2] Port: 0x00

Type: 0x10, 0x00
InitProto: 0x01, 0x00
TargetProto: 0x00, 0x01
PhyIdent: 0x02, 0x02
SASAddress: 00 00 00 00 00 00 00 00, 00 02 00 00 00 00 00 00

Phy[3] Port: 0x00

Type: 0x10, 0x00
InitProto: 0x01, 0x00
TargetProto: 0x00, 0x01
PhyIdent: 0x03, 0x03
SASAddress: 00 00 00 00 00 00 00 00, 00 03 00 00 00 00 00 00

Phy[4] Port: 0x00

Type: 0x10, 0x00
InitProto: 0x01, 0x00
TargetProto: 0x00, 0x01
PhyIdent: 0x04, 0x04
SASAddress: 00 00 00 00 00 00 00 00, 00 04 00 00 00 00 00 00

Phy[5] Port: 0x00

Type: 0x10, 0x00
InitProto: 0x01, 0x00
TargetProto: 0x00, 0x01
PhyIdent: 0x05, 0x05
SASAddress: 00 00 00 00 00 00 00 00, 00 05 00 00 00 00 00 00

/dev/csmi2,0 -d ata # /dev/csmi2,0, ATA device