Opened 10 years ago
Last modified 10 years ago
#507 closed enhancement
Strange attributes on Seagate Constellation ES.3 — at Initial Version
| Reported by: | Mathew Binkley | Owned by: | |
|---|---|---|---|
| Priority: | major | Milestone: | |
| Component: | all | Version: | 6.3 |
| Keywords: | Cc: |
Description
We normally monitor SMART attribute 5 Reallocated_Sector_Ct to predict drive failure. Recently we received a shipment of replacement drives (Seagate Constellation ES.3) that don't appear to have SMART attributes in any version of smartctl, up to and including SVN from 12/18/14.
Is it just that support for these drives hasn't yet been added to smartmontools, or is there something new/peculiar about these drives?
Info:
# ./smartctl -i /dev/sdae
smartctl 6.4 2014-12-13 r4030 [x86_64-linux-3.13.0-43-generic] (local build)
Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org
START OF INFORMATION SECTION
Vendor: SEAGATE
Product: ST4000NM0023
Revision: 0004
Compliance: SPC-4
User Capacity: 4,000,787,030,016 bytes [4.00 TB]
Logical block size: 512 bytes
LB provisioning type: unreported, LBPME=0, LBPRZ=0
Rotation Rate: 7200 rpm
Form Factor: 3.5 inches
Logical Unit id: 0x5000c500626b0313
Serial number: Z1Z5PQ6Z0000C509C0UY
Device type: disk
Transport protocol: SAS (SPL-3)
Local Time is: Thu Dec 18 16:04:45 2014 CST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
Temperature Warning: Enabled
# ./smartctl --attributes /dev/sdae
smartctl 6.4 2014-12-13 r4030 [x86_64-linux-3.13.0-43-generic] (local build)
Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org
START OF READ SMART DATA SECTION
Current Drive Temperature: 33 C
Drive Trip Temperature: 60 C
Manufactured in week 37 of year 2014
Specified cycle count over device lifetime: 10000
Accumulated start-stop cycles: 96
Specified load-unload count over device lifetime: 300000
Accumulated load-unload cycles: 127
Elements in grown defect list: 0
Vendor (Seagate) cache information
Blocks sent to initiator = 2968316052
Blocks received from initiator = 3752175265
Blocks read from cache and sent to initiator = 2227814356
Number of read and write commands whose size <= segment size = 13010546
Number of read and write commands whose size > segment size = 759449
Vendor (Seagate/Hitachi) factory information
number of hours powered up = 887.18
number of minutes until next internal SMART test = 0
