Add SanDisk X300s and Apacer 4GB SLC to the drivedb

[jeremy385893]

Please, could you add the following devices in drivedb:

• SSD SanDisk X300s 64GB MLC (SD7SB3Q-64G)
• SSD SanDisk X300s 256GB MLC (SD7SB3Q-256G)
• SSD SanDisk X300s 128GB MLC (SD7SB3Q-128G)

[jeremy385893]

And also the following device:
SATA DOM Apacer 4GB SLC APSDM004G13AN-AT
with the following output:

smartctl -x /dev/ad0
smartctl 6.3 2014-07-26 r3976 [NS-BSD 1.1.3- amd64] (local build)
Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org

START OF INFORMATION SECTION

Device Model: 4GB SATA Flash Drive
Serial Number: B0514215900900000044
Firmware Version: SFDE001A
User Capacity: 4,011,614,208 bytes [4.01 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: Solid State Device
Form Factor: 2.5 inches
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: ACS-2 (minor revision not indicated)
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Thu Aug 21 13:11:58 2014 GMT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM feature is: Unavailable
Rd look-ahead is: Enabled
Write cache is: Enabled
ATA Security is: Disabled, frozen [SEC2]
Read SCT Status failed: request failed, error code 0x05
Wt Cache Reorder: Unknown (SCT Feature Control command failed)

START OF READ SMART DATA SECTION

SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status: (0x00) Offline data collection activity

was never started.
Auto Offline Data Collection: Disabled.

Self-test execution status: ( 255) Self-test routine in progress...

150% of test remaining.

Total time to complete Offline
data collection: ( 32) seconds.
Offline data collection
capabilities: (0x1b) SMART execute Offline immediate.

Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
No Selective Self-test supported.

SMART capabilities: (0x0003) Saves SMART data before entering

power-saving mode.
Supports SMART auto save timer.

Error logging capability: (0x01) Error logging supported.

No General Purpose Logging support.

Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 1) minutes.
SCT capabilities: (0x0039) SCT Status supported.

SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE

9 Power_On_Hours -O--C- 100 100 000 - 99

12 Power_Cycle_Count -O--C- 100 100 000 - 43

167 Unknown_Attribute -O---K 100 100 000 - 0
168 Unknown_Attribute -O--C- 100 100 000 - 7
175 Program_Fail_Count_Chip PO--C- 100 100 010 - 0
192 Power-Off_Retract_Count -O--C- 100 100 000 - 37
194 Temperature_Celsius PO---K 100 100 000 - 40 (Min/Max 30/60)
163 Unknown_Attribute ------ 100 100 001 - 65
164 Unknown_Attribute ------ 100 100 001 - 21
166 Unknown_Attribute ------ 100 100 010 - 0
241 Total_LBAs_Written ------ 100 100 000 - 71588629

_ K auto-keep

| C event count

_ R error rate

| S speed/performance

_ O updated online

| P prefailure warning

ATA_READ_LOG_EXT (addr=0x00:0x00, page=0, n=1) failed: 48-bit ATA commands not implemented for legacy controllers
Read GP Log Directory failed

SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 51 Comprehensive SMART error log
0x06 SL R/O 1 SMART self-test log
0x09 SL R/W 1 Selective self-test log
0x80-0x9f SL R/W 16 Host vendor specific log
0xe0 SL R/W 1 SCT Command/Status
0xe1 SL R/W 1 SCT Data Transfer

SMART Extended Comprehensive Error Log (GP Log 0x03) not supported

SMART Error Log Version: 1
No Errors Logged

SMART Extended Self-test Log (GP Log 0x07) not supported

SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]

Selective Self-tests/Logging not supported

Read SCT Status failed: request failed, error code 0x05

Read SCT Status failed: request failed, error code 0x05
SCT (Get) Error Recovery Control command failed

Device Statistics (GP Log 0x04) not supported

ATA_READ_LOG_EXT (addr=0x11:0x00, page=0, n=1) failed: 48-bit ATA commands not implemented for legacy controllers
Read SATA Phy Event Counters failed

[jeremy385893]

smartctl -x output for SanDisk X300s device in attachment

[Alex Samorukov]

Could you please try to use "SSD toolkit" tool for one of this drives to get attributes description?

[jeremy385893]

I'm sorry but SSD toolkit is not available on my platform.

[jeremy385893]

Finally, in attachement, the output of SSD toolkit for x300s 128GB.

[Alex Samorukov]

Support for SanDisk added in r3984. Please update drivedb and let me know if it works.

P.S. which OS are you using? Possibly we can try to implement -l devstat support.

[Alex Samorukov]

Support for Apacer SSD also added

[jeremy385893]

I have just tested:

• For Apacer SSD => OK, it works
• For SanDisk => OK, it works