JMicron 152d:0539 USB 3.0 Bridge needs -d sat

[Arne Fitzenreiter]

My ZTC USB 3.0 enclosure has USB ID 152d:0539.

This ID is listed in drivedb.h but it is not useable with -d usbjmicron (failed: No device connected)

It works with -d sat

[Christian Franke]

Likely a new firmware release. Specifying port number (-d usbjmicron,0 or ,1) may also work.

Please report bcdDevice info (Linux: lsusb) of this device. Without this info, autodetection old/new firmware is not possible.

[Arne Fitzenreiter]

This a a USB2.0 PC so Superspeed cannot work but usbjmicron,x will also not work.
Here the lsusb output:

root@pny64:~# lsusb -s 001:003 -v

Bus 001 Device 003: ID 152d:0539 JMicron Technology Corp. / JMicron USA Technology Corp. JMS539 SuperSpeed SATA II 3.0G Bridge
Device Descriptor:

bLength 18
bDescriptorType 1
bcdUSB 2.10
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x152d JMicron Technology Corp. / JMicron USA Technology Corp.
idProduct 0x0539 JMS539 SuperSpeed SATA II 3.0G Bridge
bcdDevice 2.05
iManufacturer 10 JMicron
iProduct 11 USB to ATA/ATAPI Bridge
iSerial 3 00A123457503
bNumConfigurations 1
Configuration Descriptor:

bLength 9
bDescriptorType 2
wTotalLength 85
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 4 USB Mass Storage
bmAttributes 0xc0

Self Powered

MaxPower 50mA
Interface Descriptor:

bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 8 Mass Storage
bInterfaceSubClass 6 SCSI
bInterfaceProtocol 80 Bulk-Only
iInterface 0
Endpoint Descriptor:

bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2

Transfer Type Bulk
Synch Type None
Usage Type Data

wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0

Endpoint Descriptor:

bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2

Transfer Type Bulk
Synch Type None
Usage Type Data

wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0

Interface Descriptor:

bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 1
bNumEndpoints 4
bInterfaceClass 8 Mass Storage
bInterfaceSubClass 6 SCSI
bInterfaceProtocol 98
iInterface 0
Endpoint Descriptor:

bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 2

Transfer Type Bulk
Synch Type None
Usage Type Data

wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Command pipe (0x01)

Endpoint Descriptor:

bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 2

Transfer Type Bulk
Synch Type None
Usage Type Data

wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Status pipe (0x02)

Endpoint Descriptor:

bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 2

Transfer Type Bulk
Synch Type None
Usage Type Data

wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Data-in pipe (0x03)

Endpoint Descriptor:

bLength 7
bDescriptorType 5
bEndpointAddress 0x04 EP 4 OUT
bmAttributes 2

Transfer Type Bulk
Synch Type None
Usage Type Data

wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Data-out pipe (0x04)

Binary Object Store Descriptor:

bLength 5
bDescriptorType 15
wTotalLength 22
bNumDeviceCaps 2
USB 2.0 Extension Device Capability:

bLength 7
bDescriptorType 16
bDevCapabilityType 2
bmAttributes 0x00000002

Link Power Management (LPM) Supported

SuperSpeed USB Device Capability:

bLength 10
bDescriptorType 16
bDevCapabilityType 3
bmAttributes 0x00
wSpeedsSupported 0x000e

Device can operate at Full Speed (12Mbps)
Device can operate at High Speed (480Mbps)
Device can operate at SuperSpeed (5Gbps)

bFunctionalitySupport 1

Lowest fully-functional device speed is Full Speed (12Mbps)

bU1DevExitLat 10 micro seconds
bU2DevExitLat 2047 micro seconds

Device Status: 0x0001

Self Powered

root@pny64:~#
root@pny64:~# smartctl -d usbjmicron,0 /dev/sdb -iHA
smartctl 6.2 2013-07-26 r3841 [i686-linux-3.13.0-30-generic] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org

Read Device Identity failed: scsi error unsupported field in scsi command

A mandatory SMART command failed: exiting. To continue, add one or more '-T permissive' options.
root@pny64:~# smartctl -d usbjmicron,1 /dev/sdb -iHA
smartctl 6.2 2013-07-26 r3841 [i686-linux-3.13.0-30-generic] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org

Read Device Identity failed: scsi error unsupported field in scsi command

A mandatory SMART command failed: exiting. To continue, add one or more '-T permissive' options.
root@pny64:~# smartctl -d sat /dev/sdb -iHA
smartctl 6.2 2013-07-26 r3841 [i686-linux-3.13.0-30-generic] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org

START OF INFORMATION SECTION

Device Model: TS256GMSA340
Serial Number: 20140509B4397701570F
LU WWN Device Id: 5 000000 000000000
Firmware Version: SVN263
User Capacity: 256.060.514.304 bytes [256 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: Solid State Device
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: ACS-2 (minor revision not indicated)
SATA Version is: SATA 3.1, 3.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Tue Jul 1 21:21:02 2014 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

START OF READ SMART DATA SECTION

SMART STATUS RETURN: incomplete response, ATA output registers missing
SMART overall-health self-assessment test result: PASSED
Warning: This result is based on an Attribute check.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE

1 Raw_Read_Error_Rate 0x000a 100 100 000 Old_age Always - 0
2 Throughput_Performance 0x0005 100 100 050 Pre-fail Offline - 0
3 Spin_Up_Time 0x0007 100 100 050 Pre-fail Always - 0
5 Reallocated_Sector_Ct 0x0013 100 100 050 Pre-fail Always - 0
7 Unknown_SSD_Attribute 0x000b 100 100 050 Pre-fail Always - 0
8 Unknown_SSD_Attribute 0x0005 100 100 050 Pre-fail Offline - 0
9 Power_On_Hours 0x0012 100 100 000 Old_age Always - 35

10 Unknown_SSD_Attribute 0x0013 100 100 050 Pre-fail Always - 0
12 Power_Cycle_Count 0x0012 100 100 000 Old_age Always - 31

167 Unknown_Attribute 0x0022 100 100 000 Old_age Always - 0
168 Unknown_Attribute 0x0012 100 100 000 Old_age Always - 6
169 Unknown_Attribute 0x0013 100 100 010 Pre-fail Always - 3473408
170 Unknown_Attribute 0x0013 100 100 010 Pre-fail Always - 0
173 Unknown_Attribute 0x0012 199 199 000 Old_age Always - 4295491585
175 Program_Fail_Count_Chip 0x0013 100 100 010 Pre-fail Always - 0
192 Power-Off_Retract_Count 0x0012 100 100 000 Old_age Always - 24
194 Temperature_Celsius 0x0022 068 068 030 Old_age Always - 32 (Min/Max 29/40)
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
240 Unknown_SSD_Attribute 0x0013 100 100 050 Pre-fail Always - 0

root@pny64:~#

[Christian Franke]

r3950, r3951. Please run /usr/sbin/update-smart-drivedb.