Opened 8 months ago
Closed 8 months ago
#1812 closed enhancement (fixed)
add support for Verbatim Mobile Hard Drive (0x18a5:0x0446)
| Reported by: | Mikuláš Patočka | Owned by: | Christian Franke |
|---|---|---|---|
| Priority: | minor | Milestone: | Release 7.5 |
| Component: | drivedb | Version: | 7.4 |
| Keywords: | usb | Cc: | Mikuláš Patočka |
Description (last modified by )
Hi
Here I'm adding a database entry for Verbatim Mobile Hard Drive:
https://www.alza.cz/verbatim-mobile-drive-500gb-refurbished-d9843471.htm
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
---
drivedb.h | 6 ++++++
1 file changed, 6 insertions(+)
Index: smartmontools/drivedb.h
===================================================================
--- smartmontools.orig/drivedb.h 2024-03-20 11:25:03.000000000 +0100
+++ smartmontools/drivedb.h 2024-03-20 11:39:37.000000000 +0100
@@ -6381,6 +6381,12 @@ const drive_settings builtin_knowndrives
"",
"-d sat"
},
+ { "USB: Verbatim Mobile Hard Drive; ", // USB 3.0
+ "0x18a5:0x0446",
+ "",
+ "",
+ "-d sat"
+ },
// Silicon Image
{ "USB: Vantec NST-400MX-SR; Silicon Image 5744",
"0x1a4a:0x1670",
Change History (8)
comment:1 by , 8 months ago
| Description: | modified (diff) |
|---|
comment:2 by , 8 months ago
| Keywords: | usb added |
|---|---|
| Milestone: | undecided → unscheduled |
| Summary: | add support for Verbatim Mobile Hard Drive USB bridge → add support for Verbatim Mobile Hard Drive (0x18a5:0x0446) |
comment:3 by , 8 months ago
comment:4 by , 8 months ago
smartctl pre-7.5 2024-01-24 r5597 [aarch64-linux-5.15.137] (local build)
Copyright (C) 2002-24, Bruce Allen, Christian Franke, www.smartmontools.org
START OF INFORMATION SECTION
Device Model: ST500VT000-1DK142
Serial Number: W3PVPKPH
LU WWN Device Id: 5 000c50 0bfec5626
Firmware Version: 0001SDC1
User Capacity: 500 107 862 016 bytes [500 GB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 5400 rpm
Form Factor: 2.5 inches
Device is: Not in smartctl database 7.3/5577
ATA Version is: ATA8-ACS T13/1699-D revision 4
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Thu Mar 21 11:51:27 2024 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM level is: 192 (intermediate level without standby)
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, NOT FROZEN [SEC1]
Wt Cache Reorder: Unknown
START OF READ SMART DATA SECTION
SMART Status not supported: Incomplete response, ATA output registers missing
SMART overall-health self-assessment test result: PASSED
Warning: This result is based on an Attribute check.
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 0) seconds.
Offline data collection
capabilities: (0x73) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
No Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 101) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x10b1) SCT Status supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-- 111 100 006 - 32132864
3 Spin_Up_Time PO---- 100 100 000 - 0
4 Start_Stop_Count -O--CK 100 100 020 - 7
5 Reallocated_Sector_Ct PO--CK 100 100 036 - 0
7 Seek_Error_Rate POSR-- 060 060 030 - 1073569
9 Power_On_Hours -O--CK 100 100 000 - 64
10 Spin_Retry_Count PO--C- 100 100 097 - 0
12 Power_Cycle_Count -O--CK 100 100 020 - 5
184 End-to-End_Error -O--CK 100 100 099 - 0
187 Reported_Uncorrect -O--CK 100 100 000 - 0
188 Command_Timeout -O--CK 100 100 000 - 0
189 High_Fly_Writes -O-RCK 100 100 000 - 0
190 Airflow_Temperature_Cel -O---K 061 054 045 - 39 (Min/Max 27/46)
191 G-Sense_Error_Rate -O--CK 100 100 000 - 2
192 Power-Off_Retract_Count -O--CK 100 100 000 - 1
193 Load_Cycle_Count -O--CK 100 100 000 - 8
194 Temperature_Celsius -O---K 039 046 000 - 39 (0 20 0 0 0)
197 Current_Pending_Sector -O--C- 100 100 000 - 0
198 Offline_Uncorrectable ----C- 100 100 000 - 0
199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0
254 Free_Fall_Sensor -O--CK 100 100 000 - 0
_ K auto-keep | C event count _ R error rate | S speed/performance _ O updated online | P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 5 Comprehensive SMART error log
0x03 GPL R/O 5 Ext. Comprehensive SMART error log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 1 Extended self-test log
0x09 SL R/W 1 Selective self-test log
0x10 GPL R/O 1 NCQ Command Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x21 GPL R/O 1 Write stream error log
0x22 GPL R/O 1 Read stream error log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xa1 GPL,SL VS 20 Device vendor specific log
0xa2 GPL VS 2248 Device vendor specific log
0xa8 GPL,SL VS 65 Device vendor specific log
0xa9 GPL,SL VS 1 Device vendor specific log
0xab GPL VS 1 Device vendor specific log
0xb0 GPL VS 2864 Device vendor specific log
0xbd-0xbf GPL VS 65535 Device vendor specific log
0xc0 GPL,SL VS 1 Device vendor specific log
0xc1 GPL,SL VS 10 Device vendor specific log
0xc3 GPL,SL VS 8 Device vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (5 sectors)
No Errors Logged
SMART Error Log Version: 1
No Errors Logged
SMART Extended Self-test Log Version: 1 (1 sectors)
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 3
SCT Version (vendor specific): 522 (0x020a)
Device State: Active (0)
Current Temperature: 38 Celsius
Power Cycle Min/Max Temperature: 27/51 Celsius
Lifetime Min/Max Temperature: 21/51 Celsius
Under/Over Temperature Limit Count: 0/0
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 300 minutes
Min/Max recommended Temperature: 1/61 Celsius
Min/Max Temperature Limit: 2/60 Celsius
Temperature History Size (Index): 432 (18)
Index Estimated Time Temperature Celsius
19 2023-12-22 14:00 ? -
... ..(411 skipped). .. -
431 2024-03-17 10:00 ? -
0 2024-03-17 15:00 30 *
1 2024-03-17 20:00 ? -
2 2024-03-18 01:00 23
3 2024-03-18 06:00 ? -
4 2024-03-18 11:00 21
5 2024-03-18 16:00 ? -
6 2024-03-18 21:00 21
7 2024-03-19 02:00 ? -
8 2024-03-19 07:00 25
9 2024-03-19 12:00 ? -
10 2024-03-19 17:00 27
11 2024-03-19 22:00 43
12 2024-03-20 03:00 42 *
13 2024-03-20 08:00 34 *
14 2024-03-20 13:00 34 *
15 2024-03-20 18:00 39
16 2024-03-20 23:00 39
17 2024-03-21 04:00 38 *
18 2024-03-21 09:00 38 *
SCT Error Recovery Control command not supported
Device Statistics (GP/SMART Log 0x04) not supported
Pending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x000a 2 1 Device-to-host register FISes sent due to a COMRESET
0x0001 2 0 Command failed due to ICRC error
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
comment:5 by , 8 months ago
smartctl pre-7.5 2024-01-24 r5597 [aarch64-linux-5.15.137] (local build)
Copyright (C) 2002-24, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: TOSHIBA MQ01ABD050VS
Serial Number: 28DOTICWT
LU WWN Device Id: 5 000039 851b84e01
Firmware Version: AX002J
User Capacity: 500 107 862 016 bytes [500 GB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 5400 rpm
Form Factor: 2.5 inches
Device is: Not in smartctl database 7.3/5577
ATA Version is: ATA8-ACS (minor revision not indicated)
SATA Version is: SATA 3.0, 3.0 Gb/s (current: 3.0 Gb/s)
Local Time is: Thu Mar 21 11:51:32 2024 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM level is: 128 (minimum power consumption without standby)
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, NOT FROZEN [SEC1]
Wt Cache Reorder: Unknown
=== START OF READ SMART DATA SECTION ===
SMART Status not supported: Incomplete response, ATA output registers missing
SMART overall-health self-assessment test result: PASSED
Warning: This result is based on an Attribute check.
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 120) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 114) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0
2 Throughput_Performance P-S--- 100 100 050 - 0
3 Spin_Up_Time POS--K 100 100 001 - 1052
4 Start_Stop_Count -O--CK 100 100 000 - 7
5 Reallocated_Sector_Ct PO--CK 100 100 050 - 0
7 Seek_Error_Rate PO-R-- 100 100 050 - 0
8 Seek_Time_Performance P-S--- 100 100 050 - 0
9 Power_On_Hours -O--CK 100 100 000 - 64
10 Spin_Retry_Count PO--CK 100 100 030 - 0
12 Power_Cycle_Count -O--CK 100 100 000 - 6
191 G-Sense_Error_Rate -O--CK 100 100 000 - 0
192 Power-Off_Retract_Count -O--CK 100 100 000 - 0
193 Load_Cycle_Count -O--CK 100 100 000 - 1017
194 Temperature_Celsius -O---K 100 100 000 - 34 (Min/Max 19/49)
196 Reallocated_Event_Count -O--CK 100 100 000 - 0
197 Current_Pending_Sector -O--CK 100 100 000 - 0
198 Offline_Uncorrectable ----CK 100 100 000 - 0
199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0
220 Disk_Shift -O---- 100 100 000 - 0
222 Loaded_Hours -O--CK 100 100 000 - 48
223 Load_Retry_Count -O--CK 100 100 000 - 0
224 Load_Friction -O---K 100 100 000 - 0
226 Load-in_Time -OS--K 100 100 000 - 267
240 Head_Flying_Hours P----- 100 100 001 - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 51 Comprehensive SMART error log
0x03 GPL R/O 64 Ext. Comprehensive SMART error log
0x04 GPL,SL R/O 8 Device Statistics log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 1 Extended self-test log
0x09 SL R/W 1 Selective self-test log
0x10 GPL R/O 1 NCQ Command Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (64 sectors)
No Errors Logged
SMART Error Log Version: 1
No Errors Logged
SMART Extended Self-test Log Version: 1 (1 sectors)
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 2
SCT Version (vendor specific): 1 (0x0001)
Device State: Active (0)
Current Temperature: 34 Celsius
Power Cycle Min/Max Temperature: 25/49 Celsius
Lifetime Min/Max Temperature: 19/49 Celsius
Under/Over Temperature Limit Count: 0/0
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 1 minute
Min/Max recommended Temperature: 5/55 Celsius
Min/Max Temperature Limit: 5/55 Celsius
Temperature History Size (Index): 478 (72)
Index Estimated Time Temperature Celsius
73 2024-03-21 03:54 32 *************
... ..( 22 skipped). .. *************
96 2024-03-21 04:17 32 *************
97 2024-03-21 04:18 33 **************
98 2024-03-21 04:19 32 *************
... ..( 61 skipped). .. *************
160 2024-03-21 05:21 32 *************
161 2024-03-21 05:22 33 **************
162 2024-03-21 05:23 32 *************
... ..( 61 skipped). .. *************
224 2024-03-21 06:25 32 *************
225 2024-03-21 06:26 33 **************
226 2024-03-21 06:27 32 *************
... ..( 61 skipped). .. *************
288 2024-03-21 07:29 32 *************
289 2024-03-21 07:30 33 **************
290 2024-03-21 07:31 32 *************
... ..( 61 skipped). .. *************
352 2024-03-21 08:33 32 *************
353 2024-03-21 08:34 33 **************
354 2024-03-21 08:35 32 *************
... ..( 61 skipped). .. *************
416 2024-03-21 09:37 32 *************
417 2024-03-21 09:38 33 **************
418 2024-03-21 09:39 32 *************
... ..( 61 skipped). .. *************
2 2024-03-21 10:41 32 *************
3 2024-03-21 10:42 34 ***************
4 2024-03-21 10:43 32 *************
... ..( 3 skipped). .. *************
8 2024-03-21 10:47 32 *************
9 2024-03-21 10:48 33 **************
10 2024-03-21 10:49 32 *************
... ..( 15 skipped). .. *************
26 2024-03-21 11:05 32 *************
27 2024-03-21 11:06 33 **************
... ..( 38 skipped). .. **************
66 2024-03-21 11:45 33 **************
67 2024-03-21 11:46 34 ***************
68 2024-03-21 11:47 33 **************
... ..( 3 skipped). .. **************
72 2024-03-21 11:51 33 **************
SMART WRITE LOG does not return COUNT and LBA_LOW register
SCT (Get) Error Recovery Control command failed
Device Statistics (GP Log 0x04)
Page Offset Size Value Flags Description
0x01 ===== = = === == General Statistics (rev 2) ==
0x01 0x008 4 6 --- Lifetime Power-On Resets
0x01 0x010 4 64 --- Power-on Hours
0x01 0x018 6 2968465202 --- Logical Sectors Written
0x01 0x020 6 10951925 --- Number of Write Commands
0x01 0x028 6 9826812 --- Logical Sectors Read
0x01 0x030 6 98846 --- Number of Read Commands
0x02 ===== = = === == Free-Fall Statistics (rev 1) ==
0x02 0x010 4 0 --- Overlimit Shock Events
0x03 ===== = = === == Rotating Media Statistics (rev 1) ==
0x03 0x008 4 23 --- Spindle Motor Power-on Hours
0x03 0x010 4 48 --- Head Flying Hours
0x03 0x018 4 1017 --- Head Load Events
0x03 0x020 4 0 --- Number of Reallocated Logical Sectors
0x03 0x028 4 0 --- Read Recovery Attempts
0x03 0x030 4 0 --- Number of Mechanical Start Failures
0x04 ===== = = === == General Errors Statistics (rev 1) ==
0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors
0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion
0x05 ===== = = === == Temperature Statistics (rev 1) ==
0x05 0x008 1 34 --- Current Temperature
0x05 0x010 1 35 N-- Average Short Term Temperature
0x05 0x018 1 - N-- Average Long Term Temperature
0x05 0x020 1 49 --- Highest Temperature
0x05 0x028 1 19 --- Lowest Temperature
0x05 0x030 1 43 N-- Highest Average Short Term Temperature
0x05 0x038 1 35 N-- Lowest Average Short Term Temperature
0x05 0x040 1 - N-- Highest Average Long Term Temperature
0x05 0x048 1 - N-- Lowest Average Long Term Temperature
0x05 0x050 4 0 --- Time in Over-Temperature
0x05 0x058 1 55 --- Specified Maximum Operating Temperature
0x05 0x060 4 0 --- Time in Under-Temperature
0x05 0x068 1 5 --- Specified Minimum Operating Temperature
0x06 ===== = = === == Transport Statistics (rev 1) ==
0x06 0x008 4 1 --- Number of Hardware Resets
0x06 0x018 4 0 --- Number of Interface CRC Errors
0x07 ===== = = === == Solid State Device Statistics (rev 1) ==
0x07 0x008 1 0 N-- Percentage Used Endurance Indicator
|||_ C monitored condition met
||__ D supports DSN
|___ N normalized value
Pending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 4 0 Command failed due to ICRC error
0x0002 4 0 R_ERR response for data FIS
0x0003 4 0 R_ERR response for device-to-host data FIS
0x0004 4 0 R_ERR response for host-to-device data FIS
0x0005 4 0 R_ERR response for non-data FIS
0x0006 4 0 R_ERR response for device-to-host non-data FIS
0x0007 4 0 R_ERR response for host-to-device non-data FIS
0x0008 4 0 Device-to-host non-data FIS retries
0x0009 4 1 Transition from drive PhyRdy to drive PhyNRdy
0x000a 4 0 Device-to-host register FISes sent due to a COMRESET
0x000b 4 0 CRC errors within host-to-device FIS
0x000d 4 0 Non-CRC errors within host-to-device FIS
0x000f 4 0 R_ERR response for host-to-device data FIS, CRC
0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC
0x0012 4 0 R_ERR response for host-to-device non-data FIS, CRC
0x0013 4 0 R_ERR response for host-to-device non-data FIS, non-CRC
comment:6 by , 8 months ago
Here I sent it. I bought two drives, they have the same USB bridge, but different underlying SATA disk - one is Seagate, the other is Toshiba.
comment:7 by , 8 months ago
| Milestone: | unscheduled → Release 7.5 |
|---|---|
| Owner: | set to |
| Status: | new → accepted |
If possible, please also provide a
smartctl -x -aoutput of an affected device.