Opened 14 months ago
Closed 14 months ago
#1737 closed enhancement (fixed)
JMicron ab12:34cd USB 3.0 Bridge needs -d sat
Reported by: | lemonuk | Owned by: | Christian Franke |
---|---|---|---|
Priority: | minor | Milestone: | Release 7.4 |
Component: | drivedb | Version: | |
Keywords: | usb | Cc: |
Description
Followup from here: https://www.smartmontools.org/ticket/338
dmesg log:
[Jul14 17:50] usb 2-1: new SuperSpeed USB device number 6 using xhci_hcd [ +0.017371] usb 2-1: New USB device found, idVendor=ab12, idProduct=34cd, bcdDevice= 4.05 [ +0.000005] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ +0.000003] usb 2-1: Product: External Disk [ +0.000001] usb 2-1: Manufacturer: USB30 [ +0.000002] usb 2-1: SerialNumber: 01600000002D [ +0.005995] scsi host5: uas [ +0.000514] scsi 5:0:0:0: Direct-Access USB30 0405 PQ: 0 ANSI: 6
This hardware is a SATA to USB adapter enclosure.
Exact model:
Sveon STG064 Laptop Hard Drive 2.5 Inch Silver in Red (2.5 - Hard Drive, SATA, Serial ATA II, Serial ATA III, 9.5 mm, Hard Drive, 2.0/3.0 (3.1 Gen 1), Hard Drive)
Purchase link: https://www.amazon.de/-/en/Sveon-STG064-Laptop-Drive-Silver/dp/B0798MCWL8
It requires some hard drive connected to SATA port when connecting the USB to the computer, otherwise dmesg does not output anything.
Test:
# smartctl -H /dev/sdf smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.4.6-arch1-1] (local build) Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org /dev/sdf: Unknown USB bridge [0xab12:0x34cd (0x405)] Please specify device type with the -d option. Use smartctl -h to get a usage summary
This works fine:
# smartctl -H /dev/sdf -d sat
Change History (8)
comment:1 by , 14 months ago
comment:2 by , 14 months ago
The SSD is recognized fine:
# smartctl -x /dev/sdf -d sat |grep 'Device is' Device is: In smartctl database 7.3/5440
comment:3 by , 14 months ago
Sites mentioning the hardware:
https://devicehunt.com/view/type/usb/vendor/AB12
https://forums.raspberrypi.com/viewtopic.php?t=277413&start=125
comment:4 by , 14 months ago
I get this information about the SSD:
SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 128 (minimum power consumption without standby) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Unavailable === START OF READ SMART DATA SECTION === SMART Status not supported: Incomplete response, ATA output registers missing SMART overall-health self-assessment test result: PASSED Warning: This result is based on an Attribute check.
comment:5 by , 14 months ago
Added entry to wiki, no idea if should put something into Comment, apparently works fine and gives the needed information:
https://www.smartmontools.org/wiki/Supported_USB-Devices_idVendor-0x1000?sfp_email=&sfph_mail=&action=diff&version=17&old_version=14&sfp_email=&sfph_mail=
comment:6 by , 14 months ago
Keywords: | usb added |
---|---|
Milestone: | → unscheduled |
Priority: | trivial → minor |
comment:7 by , 14 months ago
Milestone: | unscheduled → Release 7.4 |
---|---|
Owner: | set to |
Status: | new → accepted |
lsusb:
Debug data: