Opened 22 months ago
Last modified 22 months ago
#1702 new defect
Seagate ST8000VN004-2M2101 doesn't show SMART attributes with -x
| Reported by: | Matt Cole | Owned by: | |
|---|---|---|---|
| Priority: | minor | Milestone: | undecided |
| Component: | smartctl | Version: | 7.3 |
| Keywords: | linux sat | Cc: |
Description
I have a Seagate Ironwolf 8TB drive (model ST8000VN004-2M2101) that's attached to a Syba 8-bay SATA-to-USB enclosure.
When I run smartctl -a, the "Vendor Specific SMART Attributes with Thresholds" section shows in the output, as I'd expect.
However, when I run smartctl -x, this section isn't included in the output -- instead, I see the following in the output at about the point where I'd expect this section to be:
Write SCT (Get) Feature Control Command failed: scsi error aborted command Wt Cache Reorder: Unknown (SCT Feature Control command failed) Read SMART Data failed: SAT command failed
Since the man page indicated that -x is equivalent to -H -i -g all -g wcreorder -c -A -f brief -l xerror,error -l xselftest,selftest -l selective -l directory -l scttemp -l scterc -l devstat -l defects -l sataphy, I tried running smartctl with these flags and then individually eliminating flags until the problem went away. Through this process, I managed to narrow down -g wcreorder as being the offending flag -- once I removed that, the issue went away.
If it helps, I've attached the output of smartctl -a, smartctl -x, and smartctl -x -r ioctl -r ioctl.
Attachments (3)
Change History (6)
by , 22 months ago
| Attachment: | smartctl_-a_output.txt added |
|---|
by , 22 months ago
| Attachment: | smartctl_-x_-r_ioctl_-r_ioctl_output.txt added |
|---|
Output of smartctl -x -r ioctl -r ioctl
comment:1 by , 22 months ago
| Keywords: | linux sat added |
|---|---|
| Milestone: | → undecided |
The SAT command failed suggests that, for some unknown reason, the kernel aborts the first SAT ATA PASS-THROUGH command after the PASS-THROUGH command for SMART WRITE LOG which failed with SCSI SENSE 0xb/0/0 (aborted command - no additional sense code).
Do other SATA devices supporting Wt Cache Reorder work on this machine with smartctl -x ?
comment:2 by , 22 months ago
Yep:
mikaey@backup-server:~/smartmontools-7.3$ sudo smartctl -g wcreorder -d sat /dev/sdx
smartctl 7.3 2022-02-28 r5338 [x86_64-linux-5.4.0-144-generic] (local build)
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
Wt Cache Reorder: Enabled
mikaey@backup-server:~/smartmontools-7.3$ sudo smartctl -x -d sat /dev/sdx
smartctl 7.3 2022-02-28 r5338 [x86_64-linux-5.4.0-144-generic] (local build)
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: HUH728080ALE601
Serial Number: VLHH1UYY
LU WWN Device Id: 5 000cca 260d4eff7
Firmware Version: A4GL0003
User Capacity: 8,001,563,222,016 bytes [8.00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 7200 rpm
Form Factor: 3.5 inches
Device is: Not in smartctl database 7.3/5319
ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Wed Mar 22 15:59:18 2023 CDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM feature is: Disabled
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, NOT FROZEN [SEC1]
Wt Cache Reorder: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 101) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 1) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate PO-R-- 100 100 016 - 0
2 Throughput_Performance P-S--- 135 135 054 - 100
3 Spin_Up_Time POS--- 100 100 024 - 0
4 Start_Stop_Count -O--C- 100 100 000 - 122
5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0
7 Seek_Error_Rate PO-R-- 100 100 067 - 0
8 Seek_Time_Performance P-S--- 140 140 020 - 15
9 Power_On_Hours -O--C- 095 095 000 - 37088
10 Spin_Retry_Count PO--C- 100 100 060 - 0
12 Power_Cycle_Count -O--CK 100 100 000 - 45
22 Unknown_Attribute PO---K 100 100 025 - 100
45 Unknown_Attribute PO---K 050 050 001 - 16711935
192 Power-Off_Retract_Count -O--CK 100 100 000 - 579
193 Load_Cycle_Count -O--C- 100 100 000 - 579
194 Temperature_Celsius -O---- 171 171 000 - 35 (Min/Max 14/48)
196 Reallocated_Event_Count -O--CK 100 100 000 - 0
197 Current_Pending_Sector -O---K 100 100 000 - 0
198 Offline_Uncorrectable ---R-- 100 100 000 - 2
199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0
231 Temperature_Celsius -O--CK 100 100 000 - 0
241 Total_LBAs_Written -O--C- 100 100 000 - 2172562959610
242 Total_LBAs_Read -O--C- 100 100 000 - 2100568360143
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 1 Comprehensive SMART error log
0x03 GPL R/O 1 Ext. Comprehensive SMART error log
0x04 GPL,SL R/O 8 Device Statistics log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 1 Extended self-test log
0x08 GPL R/O 2 Power Conditions log
0x09 SL R/W 1 Selective self-test log
0x10 GPL R/O 1 NCQ Command Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x12 GPL R/O 1 SATA NCQ Non-Data log
0x13 GPL R/O 1 SATA NCQ Send and Receive log
0x15 GPL R/W 1 Rebuild Assist log
0x21 GPL R/O 1 Write stream error log
0x22 GPL R/O 1 Read stream error log
0x24 GPL R/O 256 Current Device Internal Status Data log
0x25 GPL R/O 256 Saved Device Internal Status Data log
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
0x80 GPL R/W 688 Host vendor specific log
0x81-0x9f GPL,SL R/W 16 Host vendor specific log
0xb2 GPL VS 688 Device vendor specific log
0xc8 GPL VS 12 Device vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (1 sectors)
No Errors Logged
SMART Extended Self-test Log Version: 1 (1 sectors)
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 36713 -
# 2 Extended offline Completed without error 00% 36698 -
# 3 Short offline Completed without error 00% 36665 -
# 4 Short offline Completed without error 00% 36641 -
# 5 Vendor (0x70) Completed without error 00% 36479 -
# 6 Vendor (0x71) Completed without error 00% 36479 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 3
SCT Version (vendor specific): 256 (0x0100)
Device State: Active (0)
Current Temperature: 35 Celsius
Power Cycle Min/Max Temperature: 34/39 Celsius
Lifetime Min/Max Temperature: 14/48 Celsius
Under/Over Temperature Limit Count: 0/0
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 1 minute
Min/Max recommended Temperature: 0/60 Celsius
Min/Max Temperature Limit: -40/70 Celsius
Temperature History Size (Index): 128 (60)
Index Estimated Time Temperature Celsius
61 2023-03-22 13:52 35 ****************
... ..(126 skipped). .. ****************
60 2023-03-22 15:59 35 ****************
SCT Error Recovery Control:
Read: Disabled
Write: Disabled
Device Statistics (GP Log 0x04)
Page Offset Size Value Flags Description
0x01 ===== = = === == General Statistics (rev 2) ==
0x01 0x008 4 45 --- Lifetime Power-On Resets
0x01 0x010 4 37088 --- Power-on Hours
0x01 0x018 6 2172562959610 --- Logical Sectors Written
0x01 0x020 6 3173351955 --- Number of Write Commands
0x01 0x028 6 2100568360143 --- Logical Sectors Read
0x01 0x030 6 3161218214 --- Number of Read Commands
0x01 0x038 6 133517041400 --- Date and Time TimeStamp
0x03 ===== = = === == Rotating Media Statistics (rev 1) ==
0x03 0x008 4 35142 --- Spindle Motor Power-on Hours
0x03 0x010 4 35142 --- Head Flying Hours
0x03 0x018 4 579 --- Head Load Events
0x03 0x020 4 0 --- Number of Reallocated Logical Sectors
0x03 0x028 4 4 --- Read Recovery Attempts
0x03 0x030 4 0 --- Number of Mechanical Start Failures
0x04 ===== = = === == General Errors Statistics (rev 1) ==
0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors
0x04 0x010 4 2 --- Resets Between Cmd Acceptance and Completion
0x05 ===== = = === == Temperature Statistics (rev 1) ==
0x05 0x008 1 35 --- Current Temperature
0x05 0x010 1 34 N-- Average Short Term Temperature
0x05 0x018 1 35 N-- Average Long Term Temperature
0x05 0x020 1 48 --- Highest Temperature
0x05 0x028 1 14 --- Lowest Temperature
0x05 0x030 1 47 N-- Highest Average Short Term Temperature
0x05 0x038 1 23 N-- Lowest Average Short Term Temperature
0x05 0x040 1 45 N-- Highest Average Long Term Temperature
0x05 0x048 1 25 N-- Lowest Average Long Term Temperature
0x05 0x050 4 0 --- Time in Over-Temperature
0x05 0x058 1 60 --- Specified Maximum Operating Temperature
0x05 0x060 4 0 --- Time in Under-Temperature
0x05 0x068 1 0 --- Specified Minimum Operating Temperature
0x06 ===== = = === == Transport Statistics (rev 1) ==
0x06 0x008 4 1 --- Number of Hardware Resets
0x06 0x010 4 145 --- Number of ASR Events
0x06 0x018 4 0 --- Number of Interface CRC Errors
|||_ C monitored condition met
||__ D supports DSN
|___ N normalized value
Pending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 2 0 Command failed due to ICRC error
0x0002 2 0 R_ERR response for data FIS
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0005 2 0 R_ERR response for non-data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
0x0008 2 0 Device-to-host non-data FIS retries
0x0009 2 2 Transition from drive PhyRdy to drive PhyNRdy
0x000a 2 1 Device-to-host register FISes sent due to a COMRESET
0x000b 2 0 CRC errors within host-to-device FIS
0x000d 2 0 Non-CRC errors within host-to-device FIS
Version 0, edited 22 months ago by (next)
comment:3 by , 22 months ago
I even have another drive where the SMART READ LOG command fails, but the SMART READ ATTRIBUTE VALUES command still succeeds:
mikaey@backup-server:~/smartmontools-7.3$ sudo smartctl -x -d sat /dev/sdd -r ioctl -r ioctl
smartctl 7.3 2022-02-28 r5338 [x86_64-linux-5.4.0-144-generic] (local build)
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
REPORT-IOCTL: Device=/dev/sdd Command=IDENTIFY DEVICE
Input: FR=...., SC=0x01, LL=...., LM=...., LH=...., DEV=...., CMD=0xec IN
>>>> do_scsi_cmnd_io: sg_io_ver=3
[ata pass-through(16): 85 08 0e 00 00 00 01 00 00 00 00 00 00 00 ec 00 ]
scsi_status=0x0, sg_transport_status=0x0, sg_driver_status=0x0
sg_info=0x0 sg_duration=4 milliseconds resid=0
[Duration: 0.002433s]
REPORT-IOCTL: Device=/dev/sdd Command=IDENTIFY DEVICE returned 0
=== START OF INFORMATION SECTION ===
Model Family: Seagate IronWolf Pro
Device Model: ST10000NE0008-2JM101
Serial Number: ZJ0073V4
LU WWN Device Id: 5 000c50 0c7f77aac
Firmware Version: EN01
User Capacity: 10,000,831,348,736 bytes [10.0 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 7200 rpm
Form Factor: 3.5 inches
Device is: In smartctl database 7.3/5319
ATA Version is: ACS-4 (minor revision not indicated)
SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Wed Mar 22 16:09:31 2023 CDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM feature is: Unavailable
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Disabled
ATA Security is: Disabled, NOT FROZEN [SEC1]
REPORT-IOCTL: Device=/dev/sdd Command=SMART READ LOG InputParameter=224
Input: FR=0xd5, SC=0x01, LL=0xe0, LM=0x4f, LH=0xc2, DEV=...., CMD=0xb0 IN
>>>> do_scsi_cmnd_io: sg_io_ver=3
[ata pass-through(16): 85 08 0e 00 d5 00 01 00 e0 00 4f 00 c2 00 b0 00 ]
scsi_status=0x0, sg_transport_status=0x0, sg_driver_status=0x0
sg_info=0x0 sg_duration=4 milliseconds resid=0
[Duration: 0.000550s]
REPORT-IOCTL: Device=/dev/sdd Command=SMART READ LOG returned 0
>>>> do_scsi_cmnd_io: sg_io_ver=3
[ata pass-through(16): 85 0a 26 00 d6 00 01 00 e0 00 4f 00 c2 00 b0 00 ]
scsi_status=0x2, sg_transport_status=0x0, sg_driver_status=0x8
sg_info=0x1 sg_duration=0 milliseconds resid=0
status=2: [desc] sense_key=0 asc=0 ascq=1d
REPORT-IOCTL: Device=/dev/sdd Command=SMART READ LOG InputParameter=224
Input: FR=0xd5, SC=0x01, LL=0xe0, LM=0x4f, LH=0xc2, DEV=...., CMD=0xb0 IN
>>>> do_scsi_cmnd_io: sg_io_ver=3
[ata pass-through(16): 85 08 0e 00 d5 00 01 00 e0 00 4f 00 c2 00 b0 00 ]
scsi_status=0x0, sg_transport_status=0x0, sg_driver_status=0x0
sg_info=0x0 sg_duration=12 milliseconds resid=0
[Duration: 0.012439s]
REPORT-IOCTL: Device=/dev/sdd Command=SMART READ LOG returned 0
Unexpected SCT status 0x000d (action_code=0, function_code=2)
Wt Cache Reorder: Unknown (SCT Feature Control command failed)
REPORT-IOCTL: Device=/dev/sdd Command=SMART READ ATTRIBUTE VALUES
Input: FR=0xd0, SC=0x01, LL=...., LM=0x4f, LH=0xc2, DEV=...., CMD=0xb0 IN
>>>> do_scsi_cmnd_io: sg_io_ver=3
[ata pass-through(16): 85 08 0e 00 d0 00 01 00 00 00 4f 00 c2 00 b0 00 ]
scsi_status=0x0, sg_transport_status=0x0, sg_driver_status=0x0
sg_info=0x0 sg_duration=0 milliseconds resid=0
[Duration: 0.001669s]
REPORT-IOCTL: Device=/dev/sdd Command=SMART READ ATTRIBUTE VALUES returned 0
REPORT-IOCTL: Device=/dev/sdd Command=SMART READ ATTRIBUTE THRESHOLDS
Input: FR=0xd1, SC=0x01, LL=0x01, LM=0x4f, LH=0xc2, DEV=...., CMD=0xb0 IN
>>>> do_scsi_cmnd_io: sg_io_ver=3
[ata pass-through(16): 85 08 0e 00 d1 00 01 00 01 00 4f 00 c2 00 b0 00 ]
scsi_status=0x0, sg_transport_status=0x0, sg_driver_status=0x0
sg_info=0x0 sg_duration=8 milliseconds resid=0
[Duration: 0.006557s]
REPORT-IOCTL: Device=/dev/sdd Command=SMART READ ATTRIBUTE THRESHOLDS returned 0
=== START OF READ SMART DATA SECTION ===
REPORT-IOCTL: Device=/dev/sdd Command=SMART STATUS CHECK
Input: FR=0xda, SC=...., LL=...., LM=0x4f, LH=0xc2, DEV=...., CMD=0xb0
>>>> do_scsi_cmnd_io: sg_io_ver=3
[ata pass-through(16): 85 06 2c 00 da 00 00 00 00 00 4f 00 c2 00 b0 00 ]
scsi_status=0x2, sg_transport_status=0x0, sg_driver_status=0x8
sg_info=0x1 sg_duration=8 milliseconds resid=0
status=2: [desc] sense_key=0 asc=0 ascq=1d
[Duration: 0.008906s]
Output: ERR=0x00, SC=0x00, LL=0x00, LM=0x4f, LH=0xc2, DEV=0x40, STS=0x50
REPORT-IOCTL: Device=/dev/sdd Command=SMART STATUS CHECK returned 0
SMART overall-health self-assessment test result: PASSED
See vendor-specific Attribute list for marginal Attributes.
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 567) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 977) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x50bd) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-- 079 064 044 - 88745839
3 Spin_Up_Time PO---- 094 091 000 - 0
4 Start_Stop_Count -O--CK 100 100 020 - 40
5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0
7 Seek_Error_Rate POSR-- 076 060 045 - 38039578
9 Power_On_Hours -O--CK 081 081 000 - 16898
10 Spin_Retry_Count PO--C- 100 100 097 - 0
12 Power_Cycle_Count -O--CK 100 100 020 - 21
18 Head_Health PO-R-- 100 100 050 - 0
187 Reported_Uncorrect -O--CK 100 100 000 - 0
188 Command_Timeout -O--CK 100 091 000 - 66199341055163
190 Airflow_Temperature_Cel -O---K 048 023 040 Past 52 (Min/Max 42/56 #16027)
192 Power-Off_Retract_Count -O--CK 100 100 000 - 5
193 Load_Cycle_Count -O--CK 083 083 000 - 35139
194 Temperature_Celsius -O---K 052 077 000 - 52 (0 18 0 0 0)
195 Hardware_ECC_Recovered -O-RC- 079 064 000 - 88745839
197 Current_Pending_Sector -O--C- 100 100 000 - 0
198 Offline_Uncorrectable ----C- 100 100 000 - 0
199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0
200 Pressure_Limit PO---K 100 100 001 - 0
240 Head_Flying_Hours ------ 100 253 000 - 11731h+23m+08.125s
241 Total_LBAs_Written ------ 100 253 000 - 124500366579
242 Total_LBAs_Read ------ 100 253 000 - 71159680389
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
REPORT-IOCTL: Device=/dev/sdd Command=SMART READ LOG InputParameter=0
Input: FR=0xd5, SC=0x01, LL=0x00, LM=0x4f, LH=0xc2, DEV=...., CMD=0xb0 IN
>>>> do_scsi_cmnd_io: sg_io_ver=3
[ata pass-through(16): 85 08 0e 00 d5 00 01 00 00 00 4f 00 c2 00 b0 00 ]
scsi_status=0x0, sg_transport_status=0x0, sg_driver_status=0x0
sg_info=0x0 sg_duration=4 milliseconds resid=0
[Duration: 0.000629s]
REPORT-IOCTL: Device=/dev/sdd Command=SMART READ LOG returned 0
>>>> do_scsi_cmnd_io: sg_io_ver=3
[ata pass-through(16): 85 09 0e 00 00 00 01 00 00 00 00 00 00 00 2f 00 ]
scsi_status=0x0, sg_transport_status=0x0, sg_driver_status=0x0
sg_info=0x0 sg_duration=0 milliseconds resid=0
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 5 Comprehensive SMART error log
0x03 GPL R/O 5 Ext. Comprehensive SMART error log
0x04 GPL R/O 256 Device Statistics log
0x04 SL R/O 8 Device Statistics log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 1 Extended self-test log
0x08 GPL R/O 2 Power Conditions log
0x09 SL R/W 1 Selective self-test log
0x0a GPL R/W 8 Device Statistics Notification
0x0c GPL R/O 2048 Pending Defects log
0x10 GPL R/O 1 NCQ Command Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x13 GPL R/O 1 SATA NCQ Send and Receive log
0x15 GPL R/W 1 Rebuild Assist log
0x21 GPL R/O 1 Write stream error log
0x22 GPL R/O 1 Read stream error log
0x24 GPL R/O 768 Current Device Internal Status Data log
0x2f GPL - 1 Set Sector Configuration
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xa1 GPL,SL VS 24 Device vendor specific log
0xa2 GPL VS 16320 Device vendor specific log
0xa4 GPL,SL VS 160 Device vendor specific log
0xa6 GPL VS 192 Device vendor specific log
0xa8-0xa9 GPL,SL VS 136 Device vendor specific log
0xab GPL VS 1 Device vendor specific log
0xad GPL VS 16 Device vendor specific log
0xbe-0xbf GPL VS 65535 Device vendor specific log
0xc1 GPL,SL VS 8 Device vendor specific log
0xc3 GPL,SL VS 32 Device vendor specific log
0xc9 GPL,SL VS 8 Device vendor specific log
0xca GPL,SL VS 16 Device vendor specific log
0xd1 GPL VS 336 Device vendor specific log
0xd2 GPL VS 10000 Device vendor specific log
0xd4 GPL VS 2048 Device vendor specific log
0xda GPL,SL VS 1 Device vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
>>>> do_scsi_cmnd_io: sg_io_ver=3
[ata pass-through(16): 85 09 0e 00 00 00 01 00 03 00 00 00 00 00 2f 00 ]
scsi_status=0x0, sg_transport_status=0x0, sg_driver_status=0x0
sg_info=0x0 sg_duration=20 milliseconds resid=0
SMART Extended Comprehensive Error Log Version: 1 (5 sectors)
No Errors Logged
>>>> do_scsi_cmnd_io: sg_io_ver=3
[ata pass-through(16): 85 09 0e 00 00 00 01 00 07 00 00 00 00 00 2f 00 ]
scsi_status=0x0, sg_transport_status=0x0, sg_driver_status=0x0
sg_info=0x0 sg_duration=44 milliseconds resid=0
SMART Extended Self-test Log Version: 1 (1 sectors)
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Interrupted (host reset) 00% 14503 -
# 2 Short offline Completed without error 00% 14427 -
# 3 Short offline Completed without error 00% 14426 -
# 4 Short offline Completed without error 00% 14379 -
# 5 Short offline Completed without error 00% 14355 -
# 6 Short offline Completed without error 00% 14331 -
# 7 Short offline Completed without error 00% 14307 -
# 8 Extended offline Completed without error 00% 14300 -
# 9 Short offline Completed without error 00% 14283 -
#10 Short offline Completed without error 00% 14259 -
REPORT-IOCTL: Device=/dev/sdd Command=SMART READ LOG InputParameter=9
Input: FR=0xd5, SC=0x01, LL=0x09, LM=0x4f, LH=0xc2, DEV=...., CMD=0xb0 IN
>>>> do_scsi_cmnd_io: sg_io_ver=3
[ata pass-through(16): 85 08 0e 00 d5 00 01 00 09 00 4f 00 c2 00 b0 00 ]
scsi_status=0x0, sg_transport_status=0x0, sg_driver_status=0x0
sg_info=0x0 sg_duration=0 milliseconds resid=0
[Duration: 0.000282s]
REPORT-IOCTL: Device=/dev/sdd Command=SMART READ LOG returned 0
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
REPORT-IOCTL: Device=/dev/sdd Command=SMART READ LOG InputParameter=224
Input: FR=0xd5, SC=0x01, LL=0xe0, LM=0x4f, LH=0xc2, DEV=...., CMD=0xb0 IN
>>>> do_scsi_cmnd_io: sg_io_ver=3
[ata pass-through(16): 85 08 0e 00 d5 00 01 00 e0 00 4f 00 c2 00 b0 00 ]
scsi_status=0x0, sg_transport_status=0x0, sg_driver_status=0x0
sg_info=0x0 sg_duration=8 milliseconds resid=0
[Duration: 0.008079s]
REPORT-IOCTL: Device=/dev/sdd Command=SMART READ LOG returned 0
SCT Status Version: 3
SCT Version (vendor specific): 522 (0x020a)
Device State: Active (0)
Current Temperature: 53 Celsius
Power Cycle Min/Max Temperature: 42/55 Celsius
Lifetime Min/Max Temperature: 18/77 Celsius
Under/Over Temperature Limit Count: 0/323
SMART Status: 0xc24f (PASSED)
Vendor specific:
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 01 00 00 00 00 00 00 00 00 00 00 00
REPORT-IOCTL: Device=/dev/sdd Command=SMART WRITE LOG InputParameter=224
Input: FR=0xd6, SC=0x01, LL=0xe0, LM=0x4f, LH=0xc2, DEV=...., CMD=0xb0 OUT
>>>> do_scsi_cmnd_io: sg_io_ver=3
[ata pass-through(16): 85 0a 06 00 d6 00 01 00 e0 00 4f 00 c2 00 b0 00 ]
scsi_status=0x0, sg_transport_status=0x0, sg_driver_status=0x0
sg_info=0x0 sg_duration=0 milliseconds resid=0
[Duration: 0.000623s]
REPORT-IOCTL: Device=/dev/sdd Command=SMART WRITE LOG returned 0
REPORT-IOCTL: Device=/dev/sdd Command=SMART READ LOG InputParameter=225
Input: FR=0xd5, SC=0x01, LL=0xe1, LM=0x4f, LH=0xc2, DEV=...., CMD=0xb0 IN
>>>> do_scsi_cmnd_io: sg_io_ver=3
[ata pass-through(16): 85 08 0e 00 d5 00 01 00 e1 00 4f 00 c2 00 b0 00 ]
scsi_status=0x0, sg_transport_status=0x0, sg_driver_status=0x0
sg_info=0x0 sg_duration=0 milliseconds resid=0
[Duration: 0.000277s]
REPORT-IOCTL: Device=/dev/sdd Command=SMART READ LOG returned 0
REPORT-IOCTL: Device=/dev/sdd Command=SMART READ LOG InputParameter=224
Input: FR=0xd5, SC=0x01, LL=0xe0, LM=0x4f, LH=0xc2, DEV=...., CMD=0xb0 IN
>>>> do_scsi_cmnd_io: sg_io_ver=3
[ata pass-through(16): 85 08 0e 00 d5 00 01 00 e0 00 4f 00 c2 00 b0 00 ]
scsi_status=0x0, sg_transport_status=0x0, sg_driver_status=0x0
sg_info=0x0 sg_duration=8 milliseconds resid=0
[Duration: 0.007050s]
REPORT-IOCTL: Device=/dev/sdd Command=SMART READ LOG returned 0
SCT Temperature History Version: 2
Temperature Sampling Period: 3 minutes
Temperature Logging Interval: 59 minutes
Min/Max recommended Temperature: 10/40 Celsius
Min/Max Temperature Limit: 5/60 Celsius
Temperature History Size (Index): 128 (72)
Index Estimated Time Temperature Celsius
73 2023-03-17 10:47 52 *********************************
74 2023-03-17 11:46 51 ********************************
75 2023-03-17 12:45 51 ********************************
76 2023-03-17 13:44 52 *********************************
77 2023-03-17 14:43 52 *********************************
78 2023-03-17 15:42 51 ********************************
79 2023-03-17 16:41 52 *********************************
80 2023-03-17 17:40 52 *********************************
81 2023-03-17 18:39 52 *********************************
82 2023-03-17 19:38 53 **********************************
83 2023-03-17 20:37 53 **********************************
84 2023-03-17 21:36 53 **********************************
85 2023-03-17 22:35 52 *********************************
86 2023-03-17 23:34 52 *********************************
87 2023-03-18 00:33 53 **********************************
88 2023-03-18 01:32 54 ***********************************
89 2023-03-18 02:31 54 ***********************************
90 2023-03-18 03:30 53 **********************************
91 2023-03-18 04:29 54 ***********************************
... ..( 2 skipped). .. ***********************************
94 2023-03-18 07:26 54 ***********************************
95 2023-03-18 08:25 52 *********************************
96 2023-03-18 09:24 53 **********************************
97 2023-03-18 10:23 54 ***********************************
98 2023-03-18 11:22 53 **********************************
99 2023-03-18 12:21 52 *********************************
100 2023-03-18 13:20 52 *********************************
101 2023-03-18 14:19 53 **********************************
102 2023-03-18 15:18 52 *********************************
... ..( 4 skipped). .. *********************************
107 2023-03-18 20:13 52 *********************************
108 2023-03-18 21:12 54 ***********************************
109 2023-03-18 22:11 54 ***********************************
110 2023-03-18 23:10 53 **********************************
111 2023-03-19 00:09 53 **********************************
112 2023-03-19 01:08 52 *********************************
113 2023-03-19 02:07 52 *********************************
114 2023-03-19 03:06 53 **********************************
115 2023-03-19 04:05 54 ***********************************
116 2023-03-19 05:04 53 **********************************
117 2023-03-19 06:03 53 **********************************
118 2023-03-19 07:02 54 ***********************************
119 2023-03-19 08:01 55 ************************************
120 2023-03-19 09:00 53 **********************************
... ..( 4 skipped). .. **********************************
125 2023-03-19 13:55 53 **********************************
126 2023-03-19 14:54 52 *********************************
127 2023-03-19 15:53 52 *********************************
0 2023-03-19 16:52 51 ********************************
1 2023-03-19 17:51 52 *********************************
... ..( 2 skipped). .. *********************************
4 2023-03-19 20:48 52 *********************************
5 2023-03-19 21:47 51 ********************************
6 2023-03-19 22:46 53 **********************************
7 2023-03-19 23:45 53 **********************************
8 2023-03-20 00:44 51 ********************************
9 2023-03-20 01:43 52 *********************************
... ..( 7 skipped). .. *********************************
17 2023-03-20 09:35 52 *********************************
18 2023-03-20 10:34 53 **********************************
19 2023-03-20 11:33 52 *********************************
... ..( 7 skipped). .. *********************************
27 2023-03-20 19:25 52 *********************************
28 2023-03-20 20:24 53 **********************************
29 2023-03-20 21:23 52 *********************************
... ..( 3 skipped). .. *********************************
33 2023-03-21 01:19 52 *********************************
34 2023-03-21 02:18 51 ********************************
35 2023-03-21 03:17 52 *********************************
36 2023-03-21 04:16 52 *********************************
37 2023-03-21 05:15 51 ********************************
38 2023-03-21 06:14 52 *********************************
39 2023-03-21 07:13 51 ********************************
40 2023-03-21 08:12 52 *********************************
41 2023-03-21 09:11 52 *********************************
42 2023-03-21 10:10 52 *********************************
43 2023-03-21 11:09 53 **********************************
44 2023-03-21 12:08 53 **********************************
45 2023-03-21 13:07 53 **********************************
46 2023-03-21 14:06 52 *********************************
... ..( 2 skipped). .. *********************************
49 2023-03-21 17:03 52 *********************************
50 2023-03-21 18:02 53 **********************************
51 2023-03-21 19:01 52 *********************************
52 2023-03-21 20:00 52 *********************************
53 2023-03-21 20:59 53 **********************************
54 2023-03-21 21:58 52 *********************************
... ..( 3 skipped). .. *********************************
58 2023-03-22 01:54 52 *********************************
59 2023-03-22 02:53 53 **********************************
60 2023-03-22 03:52 52 *********************************
... ..( 10 skipped). .. *********************************
71 2023-03-22 14:41 52 *********************************
72 2023-03-22 15:40 53 **********************************
REPORT-IOCTL: Device=/dev/sdd Command=SMART READ LOG InputParameter=224
Input: FR=0xd5, SC=0x01, LL=0xe0, LM=0x4f, LH=0xc2, DEV=...., CMD=0xb0 IN
>>>> do_scsi_cmnd_io: sg_io_ver=3
[ata pass-through(16): 85 08 0e 00 d5 00 01 00 e0 00 4f 00 c2 00 b0 00 ]
scsi_status=0x0, sg_transport_status=0x0, sg_driver_status=0x0
sg_info=0x0 sg_duration=8 milliseconds resid=0
[Duration: 0.007467s]
REPORT-IOCTL: Device=/dev/sdd Command=SMART READ LOG returned 0
>>>> do_scsi_cmnd_io: sg_io_ver=3
[ata pass-through(16): 85 0a 26 00 d6 00 01 00 e0 00 4f 00 c2 00 b0 00 ]
scsi_status=0x2, sg_transport_status=0x0, sg_driver_status=0x8
sg_info=0x1 sg_duration=0 milliseconds resid=0
status=2: [desc] sense_key=0 asc=0 ascq=1d
REPORT-IOCTL: Device=/dev/sdd Command=SMART READ LOG InputParameter=224
Input: FR=0xd5, SC=0x01, LL=0xe0, LM=0x4f, LH=0xc2, DEV=...., CMD=0xb0 IN
>>>> do_scsi_cmnd_io: sg_io_ver=3
[ata pass-through(16): 85 08 0e 00 d5 00 01 00 e0 00 4f 00 c2 00 b0 00 ]
scsi_status=0x0, sg_transport_status=0x0, sg_driver_status=0x0
sg_info=0x0 sg_duration=8 milliseconds resid=0
[Duration: 0.007067s]
REPORT-IOCTL: Device=/dev/sdd Command=SMART READ LOG returned 0
REPORT-IOCTL: Device=/dev/sdd Command=SMART READ LOG InputParameter=224
Input: FR=0xd5, SC=0x01, LL=0xe0, LM=0x4f, LH=0xc2, DEV=...., CMD=0xb0 IN
>>>> do_scsi_cmnd_io: sg_io_ver=3
[ata pass-through(16): 85 08 0e 00 d5 00 01 00 e0 00 4f 00 c2 00 b0 00 ]
scsi_status=0x0, sg_transport_status=0x0, sg_driver_status=0x0
sg_info=0x0 sg_duration=8 milliseconds resid=0
[Duration: 0.008286s]
REPORT-IOCTL: Device=/dev/sdd Command=SMART READ LOG returned 0
>>>> do_scsi_cmnd_io: sg_io_ver=3
[ata pass-through(16): 85 0a 26 00 d6 00 01 00 e0 00 4f 00 c2 00 b0 00 ]
scsi_status=0x2, sg_transport_status=0x0, sg_driver_status=0x8
sg_info=0x1 sg_duration=4 milliseconds resid=0
status=2: [desc] sense_key=0 asc=0 ascq=1d
REPORT-IOCTL: Device=/dev/sdd Command=SMART READ LOG InputParameter=224
Input: FR=0xd5, SC=0x01, LL=0xe0, LM=0x4f, LH=0xc2, DEV=...., CMD=0xb0 IN
>>>> do_scsi_cmnd_io: sg_io_ver=3
[ata pass-through(16): 85 08 0e 00 d5 00 01 00 e0 00 4f 00 c2 00 b0 00 ]
scsi_status=0x0, sg_transport_status=0x0, sg_driver_status=0x0
sg_info=0x0 sg_duration=4 milliseconds resid=0
[Duration: 0.007228s]
REPORT-IOCTL: Device=/dev/sdd Command=SMART READ LOG returned 0
SCT Error Recovery Control:
Read: 70 (7.0 seconds)
Write: 70 (7.0 seconds)
>>>> do_scsi_cmnd_io: sg_io_ver=3
[ata pass-through(16): 85 09 0e 00 00 00 01 00 04 00 00 00 00 00 2f 00 ]
scsi_status=0x0, sg_transport_status=0x0, sg_driver_status=0x0
sg_info=0x0 sg_duration=40 milliseconds resid=0
Device Statistics (GP Log 0x04)
Page Offset Size Value Flags Description
>>>> do_scsi_cmnd_io: sg_io_ver=3
[ata pass-through(16): 85 09 0e 00 00 00 01 00 04 00 01 00 00 00 2f 00 ]
scsi_status=0x0, sg_transport_status=0x0, sg_driver_status=0x0
sg_info=0x0 sg_duration=44 milliseconds resid=0
0x01 ===== = = === == General Statistics (rev 1) ==
0x01 0x008 4 21 --- Lifetime Power-On Resets
0x01 0x010 4 16898 --- Power-on Hours
0x01 0x018 6 124498700241 --- Logical Sectors Written
0x01 0x020 6 1308566760 --- Number of Write Commands
0x01 0x028 6 71157927064 --- Logical Sectors Read
0x01 0x030 6 354328233 --- Number of Read Commands
0x01 0x038 6 - --- Date and Time TimeStamp
>>>> do_scsi_cmnd_io: sg_io_ver=3
[ata pass-through(16): 85 09 0e 00 00 00 01 00 04 00 03 00 00 00 2f 00 ]
scsi_status=0x0, sg_transport_status=0x0, sg_driver_status=0x0
sg_info=0x0 sg_duration=40 milliseconds resid=0
0x03 ===== = = === == Rotating Media Statistics (rev 1) ==
0x03 0x008 4 16192 --- Spindle Motor Power-on Hours
0x03 0x010 4 13311 --- Head Flying Hours
0x03 0x018 4 35139 --- Head Load Events
0x03 0x020 4 0 --- Number of Reallocated Logical Sectors
0x03 0x028 4 0 --- Read Recovery Attempts
0x03 0x030 4 0 --- Number of Mechanical Start Failures
0x03 0x038 4 0 --- Number of Realloc. Candidate Logical Sectors
0x03 0x040 4 5 --- Number of High Priority Unload Events
>>>> do_scsi_cmnd_io: sg_io_ver=3
[ata pass-through(16): 85 09 0e 00 00 00 01 00 04 00 04 00 00 00 2f 00 ]
scsi_status=0x0, sg_transport_status=0x0, sg_driver_status=0x0
sg_info=0x0 sg_duration=44 milliseconds resid=0
0x04 ===== = = === == General Errors Statistics (rev 1) ==
0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors
0x04 0x010 4 15547 --- Resets Between Cmd Acceptance and Completion
0x04 0x018 4 0 -D- Physical Element Status Changed
>>>> do_scsi_cmnd_io: sg_io_ver=3
[ata pass-through(16): 85 09 0e 00 00 00 01 00 04 00 05 00 00 00 2f 00 ]
scsi_status=0x0, sg_transport_status=0x0, sg_driver_status=0x0
sg_info=0x0 sg_duration=40 milliseconds resid=0
0x05 ===== = = === == Temperature Statistics (rev 1) ==
0x05 0x008 1 53 --- Current Temperature
0x05 0x010 1 52 --- Average Short Term Temperature
0x05 0x018 1 55 --- Average Long Term Temperature
0x05 0x020 1 77 --- Highest Temperature
0x05 0x028 1 26 --- Lowest Temperature
0x05 0x030 1 74 --- Highest Average Short Term Temperature
0x05 0x038 1 31 --- Lowest Average Short Term Temperature
0x05 0x040 1 63 --- Highest Average Long Term Temperature
0x05 0x048 1 43 --- Lowest Average Long Term Temperature
0x05 0x050 4 47447 --- Time in Over-Temperature
0x05 0x058 1 60 --- Specified Maximum Operating Temperature
0x05 0x060 4 0 --- Time in Under-Temperature
0x05 0x068 1 5 --- Specified Minimum Operating Temperature
>>>> do_scsi_cmnd_io: sg_io_ver=3
[ata pass-through(16): 85 09 0e 00 00 00 01 00 04 00 06 00 00 00 2f 00 ]
scsi_status=0x0, sg_transport_status=0x0, sg_driver_status=0x0
sg_info=0x0 sg_duration=44 milliseconds resid=0
0x06 ===== = = === == Transport Statistics (rev 1) ==
0x06 0x008 4 15589 --- Number of Hardware Resets
0x06 0x010 4 20092 --- Number of ASR Events
0x06 0x018 4 0 --- Number of Interface CRC Errors
>>>> do_scsi_cmnd_io: sg_io_ver=3
[ata pass-through(16): 85 09 0e 00 00 00 01 00 04 00 ff 00 00 00 2f 00 ]
scsi_status=0x0, sg_transport_status=0x0, sg_driver_status=0x0
sg_info=0x0 sg_duration=40 milliseconds resid=0
0xff ===== = = === == Vendor Specific Statistics (rev 1) ==
0xff 0x008 7 0 --- Vendor Specific
0xff 0x010 7 4 --- Vendor Specific
0xff 0x018 7 0 --- Vendor Specific
|||_ C monitored condition met
||__ D supports DSN
|___ N normalized value
>>>> do_scsi_cmnd_io: sg_io_ver=3
[ata pass-through(16): 85 09 0e 00 00 00 01 00 0c 00 00 00 00 00 2f 00 ]
scsi_status=0x0, sg_transport_status=0x0, sg_driver_status=0x0
sg_info=0x0 sg_duration=104 milliseconds resid=0
Pending Defects log (GP Log 0x0c)
No Defects Logged
>>>> do_scsi_cmnd_io: sg_io_ver=3
[ata pass-through(16): 85 09 0e 00 00 00 01 00 11 00 00 00 00 00 2f 00 ]
scsi_status=0x0, sg_transport_status=0x0, sg_driver_status=0x0
sg_info=0x0 sg_duration=96 milliseconds resid=0
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x000a 2 1 Device-to-host register FISes sent due to a COMRESET
0x0001 2 0 Command failed due to ICRC error
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
Note:
See TracTickets
for help on using tickets.
Output of smartctl -a