Opened 22 months ago
Last modified 22 months ago
#1695 closed enhancement
Add to drivedb Western Digital WDC WD6000HLHX — at Version 2
| Reported by: | privatedev | Owned by: | |
|---|---|---|---|
| Priority: | minor | Milestone: | Release 5.40 |
| Component: | drivedb | Version: | 7.3 |
| Keywords: | hdd | Cc: |
Description (last modified by )
Note: whilst output below states that this drive is in drivedb 7.3/5440, a search of that file does not find a matching entry for "WD6000HLHX". As such, scan reports device as "scsi" when it appears to be "sat". "Smartctl -d scsi -i" returns incomplete Smart data whereas "smartctl -d sat -i" retuens complete smart data.
smartctl -x /dev/sda
smartctl 7.3 2022-02-28 r5338 [x86_64-linux-5.14.0-162.12.1.el9_1.x86_64] (local build)
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Western Digital VelociRaptor
Device Model: WDC WD6000HLHX-01JJPV0
Serial Number: WD-WXM1EA0KZM04
LU WWN Device Id: 5 0014ee 057f16a1e
Firmware Version: 04.05G04
User Capacity: 600,127,266,816 bytes [600 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: 10000 rpm
Device is: In smartctl database 7.3/5440
ATA Version is: ATA8-ACS (minor revision not indicated)
SATA Version is: SATA 2.6, 6.0 Gb/s
Local Time is: Sun Feb 12 02:06:26 2023 CST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM level is: 254 (maximum performance), recommended: 128
APM level is: 128 (minimum power consumption without standby)
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, frozen [SEC2]
Wt Cache Reorder: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x84) Offline data collection activity
was suspended by an interrupting command from host.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 8160) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 87) minutes.
Conveyance self-test routine
recommended polling time: ( 5) minutes.
SCT capabilities: (0x303d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-K 100 253 051 - 0
3 Spin_Up_Time POS--K 100 253 021 - 0
4 Start_Stop_Count -O--CK 100 100 000 - 2
5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0
7 Seek_Error_Rate -OSR-K 100 253 000 - 0
9 Power_On_Hours -O--CK 100 100 000 - 14
10 Spin_Retry_Count -O--CK 100 253 000 - 0
11 Calibration_Retry_Count -O--CK 100 253 000 - 0
12 Power_Cycle_Count -O--CK 100 100 000 - 2
192 Power-Off_Retract_Count -O--CK 200 200 000 - 0
193 Load_Cycle_Count -O--CK 200 200 000 - 1
194 Temperature_Celsius -O---K 118 117 000 - 32
196 Reallocated_Event_Count -O--CK 200 200 000 - 0
197 Current_Pending_Sector -O--CK 200 200 000 - 0
198 Offline_Uncorrectable ----CK 100 253 000 - 0
199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0
200 Multi_Zone_Error_Rate ---R-- 100 253 000 - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 5 Comprehensive SMART error log
0x03 GPL R/O 6 Ext. Comprehensive SMART error log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 1 Extended self-test log
0x09 SL R/W 1 Selective self-test log
0x10 GPL R/O 1 NCQ Command Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xa0-0xa7 GPL,SL VS 16 Device vendor specific log
0xa8-0xb5 GPL,SL VS 1 Device vendor specific log
0xb6 GPL VS 1 Device vendor specific log
0xb7 GPL,SL VS 1 Device vendor specific log
0xbd GPL,SL VS 1 Device vendor specific log
0xc0 GPL,SL VS 1 Device vendor specific log
0xc1 GPL VS 24 Device vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (6 sectors)
Device Error Count: 5
CR = Command Register
FEATR = Features Register
COUNT = Count (was: Sector Count) Register
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
LH = LBA High (was: Cylinder High) Register ] LBA
LM = LBA Mid (was: Cylinder Low) Register ] Register
LL = LBA Low (was: Sector Number) Register ]
DV = Device (was: Device/Head) Register
DC = Device Control Register
ER = Error register
ST = Status register
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 5 [4] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
04 -- 51 44 01 00 00 00 00 00 30 a0 00 Error: ABRT
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
b0 00 d6 00 01 00 00 00 c2 4f be a0 00 00:00:15.276 SMART WRITE LOG
b0 00 d6 00 01 00 00 00 c2 4f be a0 00 00:00:15.275 SMART WRITE LOG
b0 00 d6 00 01 00 00 00 c2 4f be a0 00 00:00:15.275 SMART WRITE LOG
b0 00 d6 00 01 00 00 00 c2 4f be a0 00 00:00:15.275 SMART WRITE LOG
b0 00 d6 00 01 00 00 00 c2 4f be a0 00 00:00:15.274 SMART WRITE LOG
Error 4 [3] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
04 -- 51 44 01 00 00 00 00 00 30 a0 00 Error: ABRT
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
b0 00 d6 00 01 00 00 00 c2 4f be a0 00 00:00:15.275 SMART WRITE LOG
b0 00 d6 00 01 00 00 00 c2 4f be a0 00 00:00:15.275 SMART WRITE LOG
b0 00 d6 00 01 00 00 00 c2 4f be a0 00 00:00:15.275 SMART WRITE LOG
b0 00 d6 00 01 00 00 00 c2 4f be a0 00 00:00:15.274 SMART WRITE LOG
b0 00 d6 00 01 00 00 00 c2 4f be a0 00 00:00:15.160 SMART WRITE LOG
Error 3 [2] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
04 -- 51 44 01 00 00 00 00 00 30 a0 00 Error: ABRT
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
b0 00 d6 00 01 00 00 00 c2 4f be a0 00 00:00:15.275 SMART WRITE LOG
b0 00 d6 00 01 00 00 00 c2 4f be a0 00 00:00:15.275 SMART WRITE LOG
b0 00 d6 00 01 00 00 00 c2 4f be a0 00 00:00:15.274 SMART WRITE LOG
b0 00 d6 00 01 00 00 00 c2 4f be a0 00 00:00:15.160 SMART WRITE LOG
b0 00 d6 00 01 00 00 00 c2 4f be a0 00 00:00:15.046 SMART WRITE LOG
Error 2 [1] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
04 -- 51 44 01 00 00 00 00 00 30 a0 00 Error: ABRT
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
b0 00 d6 00 01 00 00 00 c2 4f be a0 00 00:00:15.275 SMART WRITE LOG
b0 00 d6 00 01 00 00 00 c2 4f be a0 00 00:00:15.274 SMART WRITE LOG
b0 00 d6 00 01 00 00 00 c2 4f be a0 00 00:00:15.160 SMART WRITE LOG
b0 00 d6 00 01 00 00 00 c2 4f be a0 00 00:00:15.046 SMART WRITE LOG
b0 00 d6 00 01 00 00 00 c2 4f be a0 00 00:00:14.932 SMART WRITE LOG
Error 1 [0] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
04 -- 51 00 01 00 00 00 00 00 30 a0 00 Error: ABRT
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
b0 00 d6 00 01 00 00 00 c2 4f be a0 00 00:00:15.274 SMART WRITE LOG
b0 00 d6 00 01 00 00 00 c2 4f be a0 00 00:00:15.160 SMART WRITE LOG
b0 00 d6 00 01 00 00 00 c2 4f be a0 00 00:00:15.046 SMART WRITE LOG
b0 00 d6 00 01 00 00 00 c2 4f be a0 00 00:00:14.932 SMART WRITE LOG
b0 00 d6 00 01 00 00 00 c2 4f be a0 00 00:00:14.813 SMART WRITE LOG
SMART Extended Self-test Log Version: 1 (1 sectors)
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 3
SCT Version (vendor specific): 258 (0x0102)
Device State: Active (0)
Current Temperature: 32 Celsius
Power Cycle Min/Max Temperature: 23/33 Celsius
Lifetime Min/Max Temperature: 23/33 Celsius
Under/Over Temperature Limit Count: 0/0
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 1 minute
Min/Max recommended Temperature: 0/60 Celsius
Min/Max Temperature Limit: -41/85 Celsius
Temperature History Size (Index): 478 (418)
Index Estimated Time Temperature Celsius
419 2023-02-11 18:09 32 *************
420 2023-02-11 18:10 32 *************
421 2023-02-11 18:11 32 *************
422 2023-02-11 18:12 ? -
423 2023-02-11 18:13 23 ****
424 2023-02-11 18:14 23 ****
425 2023-02-11 18:15 24 *****
426 2023-02-11 18:16 24 *****
427 2023-02-11 18:17 25 ******
428 2023-02-11 18:18 25 ******
429 2023-02-11 18:19 26 *******
430 2023-02-11 18:20 27 ********
... ..( 3 skipped). .. ********
434 2023-02-11 18:24 27 ********
435 2023-02-11 18:25 28 *********
436 2023-02-11 18:26 28 *********
437 2023-02-11 18:27 28 *********
438 2023-02-11 18:28 29 **********
... ..( 3 skipped). .. **********
442 2023-02-11 18:32 29 **********
443 2023-02-11 18:33 30 ***********
... ..( 32 skipped). .. ***********
476 2023-02-11 19:06 30 ***********
477 2023-02-11 19:07 31 ************
0 2023-02-11 19:08 31 ************
1 2023-02-11 19:09 31 ************
2 2023-02-11 19:10 32 *************
3 2023-02-11 19:11 32 *************
4 2023-02-11 19:12 33 **************
... ..( 3 skipped). .. **************
8 2023-02-11 19:16 33 **************
9 2023-02-11 19:17 32 *************
... ..( 37 skipped). .. *************
47 2023-02-11 19:55 32 *************
48 2023-02-11 19:56 31 ************
49 2023-02-11 19:57 32 *************
50 2023-02-11 19:58 32 *************
51 2023-02-11 19:59 31 ************
... ..( 5 skipped). .. ************
57 2023-02-11 20:05 31 ************
58 2023-02-11 20:06 32 *************
59 2023-02-11 20:07 31 ************
... ..( 3 skipped). .. ************
63 2023-02-11 20:11 31 ************
64 2023-02-11 20:12 32 *************
... ..( 21 skipped). .. *************
86 2023-02-11 20:34 32 *************
87 2023-02-11 20:35 31 ************
88 2023-02-11 20:36 32 *************
89 2023-02-11 20:37 32 *************
90 2023-02-11 20:38 31 ************
... ..( 28 skipped). .. ************
119 2023-02-11 21:07 31 ************
120 2023-02-11 21:08 32 *************
... ..( 13 skipped). .. *************
134 2023-02-11 21:22 32 *************
135 2023-02-11 21:23 31 ************
136 2023-02-11 21:24 31 ************
137 2023-02-11 21:25 31 ************
138 2023-02-11 21:26 32 *************
139 2023-02-11 21:27 32 *************
140 2023-02-11 21:28 31 ************
... ..( 23 skipped). .. ************
164 2023-02-11 21:52 31 ************
165 2023-02-11 21:53 32 *************
... ..( 19 skipped). .. *************
185 2023-02-11 22:13 32 *************
186 2023-02-11 22:14 31 ************
187 2023-02-11 22:15 32 *************
188 2023-02-11 22:16 31 ************
... ..( 21 skipped). .. ************
210 2023-02-11 22:38 31 ************
211 2023-02-11 22:39 32 *************
... ..( 13 skipped). .. *************
225 2023-02-11 22:53 32 *************
226 2023-02-11 22:54 31 ************
... ..( 22 skipped). .. ************
249 2023-02-11 23:17 31 ************
250 2023-02-11 23:18 32 *************
... ..( 17 skipped). .. *************
268 2023-02-11 23:36 32 *************
269 2023-02-11 23:37 31 ************
... ..( 15 skipped). .. ************
285 2023-02-11 23:53 31 ************
286 2023-02-11 23:54 32 *************
287 2023-02-11 23:55 31 ************
288 2023-02-11 23:56 32 *************
... ..( 16 skipped). .. *************
305 2023-02-12 00:13 32 *************
306 2023-02-12 00:14 31 ************
... ..( 18 skipped). .. ************
325 2023-02-12 00:33 31 ************
326 2023-02-12 00:34 32 *************
... ..( 36 skipped). .. *************
363 2023-02-12 01:11 32 *************
364 2023-02-12 01:12 33 **************
... ..( 10 skipped). .. **************
375 2023-02-12 01:23 33 **************
376 2023-02-12 01:24 32 *************
... ..( 21 skipped). .. *************
398 2023-02-12 01:46 32 *************
399 2023-02-12 01:47 33 **************
... ..( 9 skipped). .. **************
409 2023-02-12 01:57 33 **************
410 2023-02-12 01:58 32 *************
411 2023-02-12 01:59 32 *************
412 2023-02-12 02:00 33 **************
413 2023-02-12 02:01 33 **************
414 2023-02-12 02:02 32 *************
... ..( 3 skipped). .. *************
418 2023-02-12 02:06 32 *************
SCT Error Recovery Control:
Read: 70 (7.0 seconds)
Write: 70 (7.0 seconds)
Device Statistics (GP/SMART Log 0x04) not supported
Pending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 2 0 Command failed due to ICRC error
0x0002 2 0 R_ERR response for data FIS
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0005 2 0 R_ERR response for non-data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
0x000a 2 1 Device-to-host register FISes sent due to a COMRESET
0x000b 2 0 CRC errors within host-to-device FIS
0x8000 4 28444 Vendor specific
Change History (2)
comment:1 by , 22 months ago
| Component: | all → drivedb |
|---|
comment:2 by , 22 months ago
| Description: | modified (diff) |
|---|
Note:
See TracTickets
for help on using tickets.
