Opened 3 years ago
Closed 3 years ago
#1561 closed defect (invalid)
smartctl no longer detects /dev/sdb and /dev/sdd temperatures
| Reported by: | Laurent Durand | Owned by: | |
|---|---|---|---|
| Priority: | minor | Milestone: | |
| Component: | smartctl | Version: | 7.2 |
| Keywords: | ata | Cc: |
Description
Hello.
I used to see all the temperatures of my hard disks, but I changed my disk / and since then, smartctl no longer sees the temperatures of my /dev/sdb and /dev/sdd.
I am under Manjaro Linux in AMD64.
Can anybody help me ?
Thanks Ignace.
Change History (5)
comment:1 by , 3 years ago
| Milestone: | → undecided |
|---|
comment:2 by , 3 years ago
Good evening, Christian Franke.
In fact, there, the temperature of /dev/sdb is available again.
The problem remains for /dev/sdd.
Not knowing which sample of the command you want, I pass the full output of the command to you:
[ignace@ignace-pc ~]$ sudo smartctl -x /dev/sdd
smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.16.5-1-MANJARO] (local build)
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Samsung based SSDs
Device Model: Samsung SSD 860 PRO 512GB
Serial Number: S42YNX0R900179V
LU WWN Device Id: 5 002538 e419000e0
Firmware Version: RVM02B6Q
User Capacity: 512 110 190 592 bytes [512 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: Solid State Device
Form Factor: 2.5 inches
TRIM Command: Available, deterministic, zeroed
Device is: In smartctl database [for details use: -P show]
ATA Version is: ACS-4 T13/BSR INCITS 529 revision 5
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Tue Feb 15 18:55:54 2022 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM feature is: Unavailable
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, frozen [SEC2]
Wt Cache Reorder: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x80) Offline data collection activity
was never started.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 0) seconds.
Offline data collection
capabilities: (0x53) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
No Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 85) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 1
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0
9 Power_On_Hours -O--CK 099 099 000 - 436
12 Power_Cycle_Count -O--CK 099 099 000 - 26
177 Wear_Leveling_Count PO--C- 100 100 000 - 0
179 Used_Rsvd_Blk_Cnt_Tot PO--C- 100 100 010 - 0
181 Program_Fail_Cnt_Total -O--CK 100 100 010 - 0
182 Erase_Fail_Count_Total -O--CK 100 100 010 - 0
183 Runtime_Bad_Block PO--C- 100 100 010 - 0
187 Uncorrectable_Error_Cnt -O--CK 100 100 000 - 0
190 Airflow_Temperature_Cel -O--CK 063 055 000 - 37
195 ECC_Error_Rate -O-RC- 200 200 000 - 0
199 CRC_Error_Count -OSRCK 099 099 000 - 12
235 POR_Recovery_Count -O--C- 099 099 000 - 6
241 Total_LBAs_Written -O--CK 099 099 000 - 345980159
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 1 Comprehensive SMART error log
0x03 GPL R/O 1 Ext. Comprehensive SMART error log
0x04 GPL,SL R/O 8 Device Statistics log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 1 Extended self-test log
0x09 SL R/W 1 Selective self-test log
0x10 GPL R/O 1 NCQ Command Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x13 GPL R/O 1 SATA NCQ Send and Receive log
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xa1 SL VS 16 Device vendor specific log
0xa5 SL VS 16 Device vendor specific log
0xce-0xcf SL VS 16 Device vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (1 sectors)
No Errors Logged
SMART Extended Self-test Log Version: 1 (1 sectors)
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 3
SCT Version (vendor specific): 256 (0x0100)
Device State: Active (0)
Current Temperature: 37 Celsius
Power Cycle Min/Max Temperature: 29/40 Celsius
Lifetime Min/Max Temperature: 19/45 Celsius
Specified Max Operating Temperature: 70 Celsius
Under/Over Temperature Limit Count: 0/0
SMART Status: 0xc24f (PASSED)
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 10 minutes
Min/Max recommended Temperature: 0/70 Celsius
Min/Max Temperature Limit: 0/70 Celsius
Temperature History Size (Index): 128 (95)
Index Estimated Time Temperature Celsius
96 2022-02-14 21:40 37 ******************
97 2022-02-14 21:50 38 *******************
98 2022-02-14 22:00 37 ******************
99 2022-02-14 22:10 38 *******************
100 2022-02-14 22:20 38 *******************
101 2022-02-14 22:30 37 ******************
102 2022-02-14 22:40 38 *******************
103 2022-02-14 22:50 37 ******************
104 2022-02-14 23:00 39 ********************
105 2022-02-14 23:10 37 ******************
106 2022-02-14 23:20 37 ******************
107 2022-02-14 23:30 37 ******************
108 2022-02-14 23:40 36 *****************
109 2022-02-14 23:50 37 ******************
110 2022-02-15 00:00 36 *****************
... ..( 13 skipped). .. *****************
124 2022-02-15 02:20 36 *****************
125 2022-02-15 02:30 37 ******************
126 2022-02-15 02:40 37 ******************
127 2022-02-15 02:50 39 ********************
0 2022-02-15 03:00 36 *****************
... ..( 20 skipped). .. *****************
21 2022-02-15 06:30 36 *****************
22 2022-02-15 06:40 38 *******************
23 2022-02-15 06:50 37 ******************
24 2022-02-15 07:00 36 *****************
... ..( 2 skipped). .. *****************
27 2022-02-15 07:30 36 *****************
28 2022-02-15 07:40 38 *******************
29 2022-02-15 07:50 36 *****************
... ..( 7 skipped). .. *****************
37 2022-02-15 09:10 36 *****************
38 2022-02-15 09:20 37 ******************
39 2022-02-15 09:30 37 ******************
40 2022-02-15 09:40 36 *****************
... ..( 6 skipped). .. *****************
47 2022-02-15 10:50 36 *****************
48 2022-02-15 11:00 37 ******************
49 2022-02-15 11:10 36 *****************
50 2022-02-15 11:20 38 *******************
51 2022-02-15 11:30 36 *****************
52 2022-02-15 11:40 36 *****************
53 2022-02-15 11:50 37 ******************
54 2022-02-15 12:00 37 ******************
55 2022-02-15 12:10 35 ****************
56 2022-02-15 12:20 35 ****************
57 2022-02-15 12:30 36 *****************
... ..( 2 skipped). .. *****************
60 2022-02-15 13:00 36 *****************
61 2022-02-15 13:10 37 ******************
62 2022-02-15 13:20 36 *****************
... ..( 16 skipped). .. *****************
79 2022-02-15 16:10 36 *****************
80 2022-02-15 16:20 38 *******************
81 2022-02-15 16:30 37 ******************
... ..( 4 skipped). .. ******************
86 2022-02-15 17:20 37 ******************
87 2022-02-15 17:30 38 *******************
88 2022-02-15 17:40 37 ******************
89 2022-02-15 17:50 38 *******************
90 2022-02-15 18:00 37 ******************
91 2022-02-15 18:10 36 *****************
92 2022-02-15 18:20 36 *****************
93 2022-02-15 18:30 38 *******************
94 2022-02-15 18:40 37 ******************
95 2022-02-15 18:50 37 ******************
SCT Error Recovery Control:
Read: Disabled
Write: Disabled
Device Statistics (GP Log 0x04)
Page Offset Size Value Flags Description
0x01 ===== = = === == General Statistics (rev 1) ==
0x01 0x008 4 26 --- Lifetime Power-On Resets
0x01 0x010 4 436 --- Power-on Hours
0x01 0x018 6 345980159 --- Logical Sectors Written
0x01 0x020 6 3196272 --- Number of Write Commands
0x01 0x028 6 5570099736 --- Logical Sectors Read
0x01 0x030 6 38619668 --- Number of Read Commands
0x01 0x038 6 2208000 --- Date and Time TimeStamp
0x04 ===== = = === == General Errors Statistics (rev 1) ==
0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors
0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion
0x05 ===== = = === == Temperature Statistics (rev 1) ==
0x05 0x008 1 37 --- Current Temperature
0x05 0x020 1 45 --- Highest Temperature
0x05 0x028 1 19 --- Lowest Temperature
0x05 0x058 1 70 --- Specified Maximum Operating Temperature
0x06 ===== = = === == Transport Statistics (rev 1) ==
0x06 0x008 4 2204 --- Number of Hardware Resets
0x06 0x010 4 0 --- Number of ASR Events
0x06 0x018 4 12 --- Number of Interface CRC Errors
0x07 ===== = = === == Solid State Device Statistics (rev 1) ==
0x07 0x008 1 0 N-- Percentage Used Endurance Indicator
|||_ C monitored condition met
||__ D supports DSN
|___ N normalized value
Pending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 2 0 Command failed due to ICRC error
0x0002 2 0 R_ERR response for data FIS
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0005 2 0 R_ERR response for non-data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
0x0008 2 0 Device-to-host non-data FIS retries
0x0009 2 62305 Transition from drive PhyRdy to drive PhyNRdy
0x000a 2 2 Device-to-host register FISes sent due to a COMRESET
0x000b 2 0 CRC errors within host-to-device FIS
0x000d 2 0 Non-CRC errors within host-to-device FIS
0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC
0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC
Looking at the output, I notice the line:
Current Temperature: 37 Celsius
But doing the command sudo smartctl -a /dev/sdd, the output does not show me the temperature:
[ignace@ignace-pc ~]$ sudo smartctl -a /dev/sdd
smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.16.5-1-MANJARO] (local build)
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Samsung based SSDs
Device Model: Samsung SSD 860 PRO 512GB
Serial Number: S42YNX0R900179V
LU WWN Device Id: 5 002538 e419000e0
Firmware Version: RVM02B6Q
User Capacity: 512110190592 bytes [512 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: Solid State Device
Form Factor: 2.5 inches
TRIM Command: Available, deterministic, zeroed
Device is: In smartctl database [for details use: -P show]
ATA Version is: ACS-4 T13/BSR INCITS 529 revision 5
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Tue Feb 15 18:58:31 2022 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x80) Offline data collection activity
was never started.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 0) seconds.
Offline data collection
capabilities: (0x53) SMART execute Offline immediate.
Auto offline data collection on/off support.
Suspend Offline collection upon new
command.
No Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 85) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 1
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0
9 Power_On_Hours 0x0032 099 099 000 Old_age Always - 436
12 Power_Cycle_Count 0x0032 099 099 000 Old_age Always - 26
177 Wear_Leveling_Count 0x0013 100 100,000 Pre-fail Always - 0
179 Used_Rsvd_Blk_Cnt_Tot 0x0013 100 100 010 Pre-fail Always - 0
181 Program_Fail_Cnt_Total 0x0032 100 100 010 Old_age Always - 0
182 Erase_Fail_Count_Total 0x0032 100 100 010 Old_age Always - 0
183 Runtime_Bad_Block 0x0013 100 100 010 Pre-fail Always - 0
187 Uncorrectable_Error_Cnt 0x0032 100 100 000 Old_age Always - 0
190 Airflow_Temperature_Cel 0x0032 063 055 000 Old_age Always - 37
195 ECC_Error_Rate 0x001a 200 200 000 Old_age Always - 0
199 CRC_Error_Count 0x003e 099 099 000 Old_age Always - 12
235 POR_Recovery_Count 0x0012 099 099 000 Old_age Always - 6
241 Total_LBAs_Written 0x0032 099 099 000 Old_age Always - 345983711
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
I notice that the temperature indicated in the two commands is the same while that of sudo smartctl -a /dev/sdd indicates airflow temperature.
Thank you.
Laurent Durand
Version 0, edited 3 years ago by (next)
comment:3 by , 3 years ago
SMART Attributes Data Structure revision number: 1 ... 190 Airflow_Temperature_Cel -O--CK 063 055 000 - 37 ... Device Statistics (GP Log 0x04) ... 0x05 0x008 1 37 --- Current Temperature ......
But doing the command sudo smartctl -a /dev/sdd, the output does not show me the temperature.
Device Statistics with Current Temperature is only visible in smartctl -x output.
smartctl -a only shows the legacy SMART information. This device does not provide the traditional SMART attribute 194 Temperature_Celsius but 190 Airflow_Temperature_Cel instead. This is neither a firmware bug nor a smartctl bug.
comment:4 by , 3 years ago
Thank you for this quick response.
So if I understand correctly, it's the hard disk that does not use the traditional SMART attributes which does not allow the Hddtemp software to send me the temperature of the hard disk.
Since I filed the ticket, I have tested the kernel module drivetemp, and there it sees the temperatures of all my hard drives even that of /dev/sdb at the time or smartctl -a /dev/sdb did not return the temperature of the disk to me.
So I don't use Hddtemp anymore and just go through the kernel module drivetemp.
Thank you for your attention.
Laurent Durand.
comment:5 by , 3 years ago
| Keywords: | ata added |
|---|---|
| Milestone: | undecided |
| Resolution: | → invalid |
| Status: | new → closed |
Drive does not provide attribute 194. This is not a smartctl bug.
Note:
See TracTickets
for help on using tickets.
Please be more specific and provide sample
smartctl -xoutputs.