#1453 closed defect (invalid)
Short offline self test failed [unsupported scsi opcode]
| Reported by: | MANGOTRAKA | Owned by: | |
|---|---|---|---|
| Priority: | minor | Milestone: | |
| Component: | all | Version: | |
| Keywords: | cciss linux | Cc: |
Description (last modified by )
Got following result after executing smartctl -t short -a /dev/sdb command
Error Counter logging not supported Device does not support Self Test logging Short offline self test failed [unsupported scsi opcode]
smartctl -t short -a /dev/sdb [sudo] password for onja: smartctl 7.0 2018-12-30 r4883 [x86_64-linux-3.10.0-1160.15.2.el7.x86_64] (local build) Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Vendor: HPE Product: LOGICAL VOLUME Revision: 2.65 Compliance: SPC-3 User Capacity: 3,840,653,221,888 bytes [3.84 TB] Logical block size: 512 bytes Physical block size: 4096 bytes Rotation Rate: Solid State Device Logical Unit id: 0x600508b1001cf47a4f263d424cf1ec8a Serial number: PWXKV0BRHDL2TT Device type: disk Local Time is: Thu Feb 25 15:27:57 2021 WAT SMART support is: Available - device has SMART capability. SMART support is: Enabled Temperature Warning: Disabled or Not Supported === START OF READ SMART DATA SECTION === SMART Health Status: OK Current Drive Temperature: 0 C Drive Trip Temperature: 0 C Error Counter logging not supported Device does not support Self Test logging Short offline self test failed [unsupported scsi opcode]
lsblk NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT sdb 8:16 0 3.5T 0 disk ├─sdb1 8:17 0 500M 0 part /boot/efi ├─sdb2 8:18 0 500M 0 part /boot ├─sdb3 8:19 0 2.4T 0 part │ ├─diska-root 253:0 0 299.9G 0 lvm / │ ├─diska-swap 253:1 0 25.6G 0 lvm [SWAP] │ ├─diska-pool00_tmeta 253:3 0 28M 0 lvm │ │ └─diska-pool00-tpool 253:5 0 2T 0 lvm │ │ ├─diska-pool00 253:6 0 2T 1 lvm │ │ ├─diska-var 253:7 0 50G 0 lvm /var │ │ └─diska-data 253:8 0 3T 0 lvm /data │ └─diska-pool00_tdata 253:4 0 2T 0 lvm │ └─diska-pool00-tpool 253:5 0 2T 0 lvm │ ├─diska-pool00 253:6 0 2T 1 lvm │ ├─diska-var 253:7 0 50G 0 lvm /var │ └─diska-data 253:8 0 3T 0 lvm /data └─sdb4 8:20 0 1.1T 0 part └─diska-root 253:0 0 299.9G 0 lvm / sdc 8:32 0 2.2T 0 disk └─diska2-home 253:2 0 1T 0 lvm /home sr0 11:0 1 1024M 0 rom
Change History (10)
comment:1 by , 4 years ago
| Description: | modified (diff) |
|---|
comment:2 by , 4 years ago
| Keywords: | scsi added |
|---|---|
| Milestone: | → undecided |
comment:3 by , 4 years ago
No hardware RAID controller, we RAID software LVM is used
[0:0:0:0] disk Generic- SD/MMC CRW 1.00 /dev/sda
[4:0:0:0] cd/dvd hp CDDVDW SU-208GB JM00 /dev/sr0
[7:0:0:0] enclosu HPE Smart Adapter 2.65 -
[7:1:0:0] disk HPE LOGICAL VOLUME 2.65 /dev/sdb
[7:1:0:1] disk HPE LOGICAL VOLUME 2.65 /dev/sdc
[7:2:0:0] storage HPE P408i-a SR Gen10 2.65 -
comment:4 by , 4 years ago
Access to drives behind HP Controllers may work with -d cciss,N option, see man page.
comment:5 by , 4 years ago
Thanks Franke,
Got the following
-bash-4.2$ sudo smartctl -a -d cciss,0 /dev/sdb
[sudo] password for onja:
smartctl 7.0 2018-12-30 r4883 [x86_64-linux-3.10.0-1160.15.2.el7.x86_64] (local build)
Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org
START OF INFORMATION SECTION
Device Model: MK000960GWJPP
Serial Number: BTYM916107W3960CGN
LU WWN Device Id: 5 5cd2e4 1509dbc2e
Firmware Version: 4IYVHPG3
User Capacity: 960,197,124,096 bytes [960 GB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: Solid State Device
Form Factor: 2.5 inches
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: ACS-3 T13/2161-D revision 5
SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Fri Feb 26 08:43:21 2021 WAT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
START OF READ SMART DATA SECTION
SMART Status not supported: Incomplete response, ATA output registers missing
SMART overall-health self-assessment test result: PASSED
Warning: This result is based on an Attribute check.
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 0) seconds.
Offline data collection
capabilities: (0x79) SMART execute Offline immediate.
No Auto Offline data collection support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 3) minutes.
Conveyance self-test routine
recommended polling time: ( 3) minutes.
SCT capabilities: (0x0021) SCT Status supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 1
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 130 130 039 Pre-fail Always - 4294967295
5 Reallocated_Sector_Ct 0x0033 100 100 001 Pre-fail Always - 0
9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 1169
173 Unknown_Attribute 0x0033 100 100 001 Pre-fail Always - 0
175 Program_Fail_Count_Chip 0x0033 100 100 010 Pre-fail Always - 68980247083
180 Unused_Rsvd_Blk_Cnt_Tot 0x003b 130 130 039 Pre-fail Always - 4294967295
194 Temperature_Celsius 0x0022 100 100 000 Old_age Always - 22
196 Reallocated_Event_Count 0x0033 100 100 010 Pre-fail Always - 0
SMART Error Log not supported
SMART Self-test Log not supported
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
the goal of this is to know if disks are ok, i got "Can't sync file './db4-binary.000003' to disk (Errcode: 5 "Input/output error")". error when restoring mariadb dabatase in the partition
comment:6 by , 4 years ago
The -a report only contains legacy ATA SMART information. It does not include the newer ATA SMART Extended Comprehensive Error Log. Try -x instead.
Please test smartctl -d cciss,0 -t short /dev/sdb. If it works as expected, close this ticket with resolution invalid.
comment:7 by , 4 years ago
| Resolution: | → invalid |
|---|---|
| Status: | new → closed |
smartctl -d cciss,0 -t short /dev/sdb
smartctl 7.0 2018-12-30 r4883 [x86_64-linux-3.10.0-1160.15.2.el7.x86_64] (local build)
Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: MK000960GWJPP
Serial Number: BTYM916107W3960CGN
LU WWN Device Id: 5 5cd2e4 1509dbc2e
Firmware Version: 4IYVHPG3
User Capacity: 960,197,124,096 bytes [960 GB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: Solid State Device
Form Factor: 2.5 inches
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: ACS-3 T13/2161-D revision 5
SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Fri Feb 26 11:28:39 2021 WAT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART Status not supported: Incomplete response, ATA output registers missing
SMART overall-health self-assessment test result: PASSED
Warning: This result is based on an Attribute check.
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 0) seconds.
Offline data collection
capabilities: (0x79) SMART execute Offline immediate.
No Auto Offline data collection support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 3) minutes.
Conveyance self-test routine
recommended polling time: ( 3) minutes.
SCT capabilities: (0x0021) SCT Status supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 1
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 130 130 039 Pre-fail Always - 4294967295
5 Reallocated_Sector_Ct 0x0033 100 100 001 Pre-fail Always - 0
9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 1171
173 Unknown_Attribute 0x0033 100 100 001 Pre-fail Always - 0
175 Program_Fail_Count_Chip 0x0033 100 100 010 Pre-fail Always - 68990994987
180 Unused_Rsvd_Blk_Cnt_Tot 0x003b 130 130 039 Pre-fail Always - 4294967295
194 Temperature_Celsius 0x0022 100 100 000 Old_age Always - 22
196 Reallocated_Event_Count 0x0033 100 100 010 Pre-fail Always - 0
SMART Error Log not supported
SMART Self-test Log not supported
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
=== START OF OFFLINE IMMEDIATE AND SELF-TEST SECTION ===
Sending command: "Execute SMART Short self-test routine immediately in off-line mode".
Drive command "Execute SMART Short self-test routine immediately in off-line mode" successful.
Testing has begun.
Please wait 2 minutes for test to complete.
Test will complete after Fri Feb 26 11:30:39 2021
Use smartctl -X to abort test.
comment:8 by , 4 years ago
| Keywords: | cciss linux added; scsi removed |
|---|---|
| Milestone: | undecided |
comment:9 by , 4 years ago
According to log message works as expected.
P.S. if your intention is to check disk surface - short test is not the best idea, it usually just do basic controller checks and disk service area. Use long test instead. Also you can do similar thing with raid patrol read feature.
comment:10 by , 4 years ago
p.s. disk itself seems to be an intel s4600 ssd, but with modified firmware, so attributes do no match to intel spec. I was not able to find any it pdf.
The lack of a real Product name suggests that there is some emulation layer between disk and smartctl. RAID-controller ?