Add to DB: Unknown Device APPLE HDD WDC WD10EALX-408EA0 (WD OEM)

[Andreas John]

It comes from a Apple IMac 2012.

# cat /tmp/smartctl-APPLE-HDD_WDC_WD10EALX-408EA0 :(
smartctl 6.6 2017-11-05 r4594 [x86_64-linux-4.19.0-1-grml-amd64] (local build)
Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org

START OF INFORMATION SECTION

Device Model: APPLE HDD WDC WD10EALX-408EA0
Firmware Version: 07.01D03
User Capacity: 1,000,204,886,016 bytes [1.00 TB]
Sector Size: 512 bytes logical/physical
Rotation Rate: 7200 rpm
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: ATA8-ACS (minor revision not indicated)
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Fri Oct 23 11:56:34 2020 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM feature is: Unavailable
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, NOT FROZEN [SEC1]
Wt Cache Reorder: Enabled

START OF READ SMART DATA SECTION

SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status: (0x82) Offline data collection activity

was completed without error.
Auto Offline Data Collection: Enabled.

Self-test execution status: ( 0) The previous self-test routine completed

without error or no self-test has ever
been run.

Total time to complete Offline
data collection: (16080) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.

Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.

SMART capabilities: (0x0003) Saves SMART data before entering

power-saving mode.
Supports SMART auto save timer.

Error logging capability: (0x01) Error logging supported.

General Purpose Logging supported.

Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 186) minutes.
Conveyance self-test routine
recommended polling time: ( 5) minutes.
SCT capabilities: (0xb037) SCT Status supported.

SCT Feature Control supported.
SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE

1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0
3 Spin_Up_Time POS--K 176 172 021 - 4191
4 Start_Stop_Count -O--CK 001 001 000 - 101587
5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0
7 Seek_Error_Rate -OSR-K 200 200 000 - 0
9 Power_On_Hours -O--CK 085 085 000 - 11166

10 Spin_Retry_Count -O--CK 100 100 000 - 0
11 Calibration_Retry_Count -O--CK 100 100 000 - 0
12 Power_Cycle_Count -O--CK 001 001 000 - 101586

192 Power-Off_Retract_Count -O--CK 065 065 000 - 101472
193 Load_Cycle_Count -O--CK 200 200 000 - 114
194 Temperature_Celsius -O---K 116 094 000 - 31
195 Hardware_ECC_Recovered -OS-CK 200 200 000 - 0
196 Reallocated_Event_Count -O--CK 200 200 000 - 0
197 Current_Pending_Sector -O--CK 200 200 000 - 0
198 Offline_Uncorrectable ----CK 200 200 000 - 0
199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0
200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0

_ K auto-keep

| C event count

_ R error rate

| S speed/performance

_ O updated online

| P prefailure warning

General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 5 Comprehensive SMART error log
0x03 GPL R/O 6 Ext. Comprehensive SMART error log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 1 Extended self-test log
0x09 SL R/W 1 Selective self-test log
0x10 GPL R/O 1 NCQ Command Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xa0-0xa7 GPL,SL VS 16 Device vendor specific log
0xa8-0xb4 GPL,SL VS 1 Device vendor specific log
0xb5 GPL,SL VS 128 Device vendor specific log
0xb6 GPL VS 1 Device vendor specific log
0xb7 GPL,SL VS 1 Device vendor specific log
0xc0 GPL,SL VS 1 Device vendor specific log
0xc1 GPL VS 24 Device vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer

SMART Extended Comprehensive Error Log Version: 1 (6 sectors)
No Errors Logged

SMART Extended Self-test Log Version: 1 (1 sectors)
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 11166 -

SMART Selective self-test log data structure revision number 1

SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS

1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing

Selective self-test flags (0x0):

After scanning selected spans, do NOT read-scan remainder of disk.

If Selective self-test is pending on power-up, resume after 0 minute delay.

SCT Status Version: 2
SCT Version (vendor specific): 258 (0x0102)
SCT Support Level: 1
Device State: Active (0)
Current Temperature: 31 Celsius
Power Cycle Min/Max Temperature: 27/31 Celsius
Lifetime Min/Max Temperature: 27/53 Celsius
Under/Over Temperature Limit Count: 0/0

SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 1 minute
Min/Max recommended Temperature: 0/60 Celsius
Min/Max Temperature Limit: -41/85 Celsius
Temperature History Size (Index): 478 (185)

Index Estimated Time Temperature Celsius

186 2020-10-23 03:59 49
... ..( 70 skipped). ..
257 2020-10-23 05:10 49
258 2020-10-23 05:11 50 *
259 2020-10-23 05:12 49
... ..( 7 skipped). ..
267 2020-10-23 05:20 49
268 2020-10-23 05:21 50 *
269 2020-10-23 05:22 50 *
270 2020-10-23 05:23 49
... ..( 3 skipped). ..
274 2020-10-23 05:27 49
275 2020-10-23 05:28 50 *
276 2020-10-23 05:29 49
... ..( 4 skipped). ..
281 2020-10-23 05:34 49
282 2020-10-23 05:35 50 *
283 2020-10-23 05:36 49
... ..( 2 skipped). ..
286 2020-10-23 05:39 49
287 2020-10-23 05:40 50 *
288 2020-10-23 05:41 49
289 2020-10-23 05:42 49
290 2020-10-23 05:43 50 *
... ..( 7 skipped). .. *
298 2020-10-23 05:51 50 *
299 2020-10-23 05:52 49
300 2020-10-23 05:53 49
301 2020-10-23 05:54 50 *
... ..( 47 skipped). .. *
349 2020-10-23 06:42 50 *
350 2020-10-23 06:43 ? -
351 2020-10-23 06:44 27
352 2020-10-23 06:45 27
353 2020-10-23 06:46 28 *
354 2020-10-23 06:47 29
355 2020-10-23 06:48 29
356 2020-10-23 06:49 30 *
357 2020-10-23 06:50 31
358 2020-10-23 06:51 49
... ..( 11 skipped). ..
370 2020-10-23 07:03 49
371 2020-10-23 07:04 50 *
372 2020-10-23 07:05 49
... ..( 7 skipped). ..
380 2020-10-23 07:13 49
381 2020-10-23 07:14 50 *
382 2020-10-23 07:15 49
383 2020-10-23 07:16 49
384 2020-10-23 07:17 50 *
385 2020-10-23 07:18 50 *
386 2020-10-23 07:19 49
... ..( 17 skipped). ..
404 2020-10-23 07:37 49
405 2020-10-23 07:38 50 *
406 2020-10-23 07:39 49
... ..( 16 skipped). ..
423 2020-10-23 07:56 49
424 2020-10-23 07:57 50 *
425 2020-10-23 07:58 49
... ..(237 skipped). ..
185 2020-10-23 11:56 49

SCT Error Recovery Control command not supported

Device Statistics (GP/SMART Log 0x04) not supported

Pending Defects log (GP Log 0x0c) not supported

SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 2 0 Command failed due to ICRC error
0x0002 2 0 R_ERR response for data FIS
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0005 2 0 R_ERR response for non-data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
0x000a 2 2 Device-to-host register FISes sent due to a COMRESET
0x000b 2 0 CRC errors within host-to-device FIS
0x8000 4 441 Vendor specific