Device not yet supported: SEAGATE Expansion Desktop, 6.0TB (STEB6000403)

[gddsijh49usd]

USB-Bridge ( 0x0bc2:0x331a ) is not yet listed here:
​http://www.linux-usb.org/usb.ids

Any chances to monitor this device with smartmontools?

---

Trying to include a SEAGATE Expansion Desktop, 6.0TB (STEB6000403) Drive gives the following output:

smartctl --all  /dev/sda
smartctl 6.6 2016-05-31 r4324 [armv7l-linux-4.14.176-174] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

/dev/sda: Unknown USB bridge [0x0bc2:0x331a (0x915)]
Please specify device type with the -d option.

----------------------------------------------

smartctl --all -d sat /dev/sda
smartctl 6.6 2016-05-31 r4324 [armv7l-linux-4.14.176-174] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

Read Device Identity failed: scsi error unsupported field in scsi command

A mandatory SMART command failed: exiting. To continue, add one or more '-T permissive' options.

----------------------------------------------

smartctl --all -d scsi /dev/sda
smartctl 6.6 2016-05-31 r4324 [armv7l-linux-4.14.176-174] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Vendor:               Seagate
Product:              Expansion Desk
Revision:             0915
Compliance:           SPC-4
User Capacity:        6,001,175,125,504 bytes [6.00 TB]
Logical block size:   512 bytes
Physical block size:  4096 bytes
LU is fully provisioned
Logical Unit id:      0x3e4141415a46314e
Serial number:        NAAAXXXX
Device type:          disk
Local Time is:        Sat May  9 16:25:42 2020 CEST
SMART support is:     Unavailable - device lacks SMART capability.

=== START OF READ SMART DATA SECTION ===
Current Drive Temperature:     0 C
Drive Trip Temperature:        0 C

Error Counter logging not supported

No self-tests have been logged

---

Best Regards,

Chris