add to drivedb: Packard Bell Carbon 1.5TB

[aboaboit]

Drive apparently only responds to "scsi" device type but the reply is less then helpful

[aboaboit]

In this enclosure, the disk is a normal WD which supports SMART:

START OF INFORMATION SECTION

Model Family: Western Digital Caviar Green
Device Model: WDC WD15EADS-22P8B0
Firmware Version: 01.00A01
User Capacity: 1.500.301.910.016 bytes [1,50 TB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS (minor revision not indicated)
SATA Version is: SATA 2.6, 3.0 Gb/s
Local Time is: Thu Apr 30 18:55:42 2020 CEST
SMART support is: Available

[Christian Franke]

Please report the USB Id. It should be printed by smartctl if no -d option is specified. Alternatively use the command lsusb.

Does smartctl -d sat possibly work?

[aboaboit]

smartctl -a /dev/sda
smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.5.0-2-amd64] (local build)
Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org

/dev/sda: Unknown USB bridge [0x0766:0x0017 (0x108)]

smartctl -a /dev/sda -d sat -T permissive
smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.5.0-2-amd64] (local build)
Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org

Read Device Identity failed: scsi error unsupported scsi opcode

START OF INFORMATION SECTION

Device Model: [No Information Found]
Serial Number: [No Information Found]
Firmware Version: [No Information Found]
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: [No Information Found]
Local Time is: Fri May 1 22:37:47 2020 CEST
SMART support is: Ambiguous - ATA IDENTIFY DEVICE words 82-83 don't show if SMART supported.
SMART support is: Ambiguous - ATA IDENTIFY DEVICE words 85-87 don't show if SMART is enabled.
A mandatory SMART command failed: exiting. To continue, add one or more '-T permissive' options.

[Christian Franke]

USB Id 0x0766:0x0017 Could only be added as "unsupported".

[Christian Franke]

r5440, r5441.