#1241 closed defect (wontfix)
BUG: Dead ssd during Extended test (KingDian S200)
| Reported by: | josh.viklef | Owned by: | |
|---|---|---|---|
| Priority: | critical | Milestone: | |
| Component: | all | Version: | 6.6 |
| Keywords: | Cc: |
Description
I made Extended test (10 minutes) and during test the ssd became KO.
I can see only small dialog : smartctrl is finding disk (or something like this)
If I restart PC, the bios cannot find SDD.
Antix Linux - Kingdian S200 60GB - I tried 2 SSD and both of them is now unreadable.
Change History (10)
comment:2 by , 5 years ago
| Component: | smartctl → all |
|---|---|
| Priority: | minor → critical |
| Summary: | BUG: Dead sdd during Extended test → BUG: Dead sdd during Extended test (KingDian S200) |
This is bad news. Possibly a serious bug in S200 drive firmware. I don't remember any similar bug report.
The smartctl -t long sends a single command (SMART EXECUTE OFF-LINE IMMEDIATE with LBA_LOW=2) to start the test. This is the case since the early days (2002) of smartmontools. The actual test is done by drive firmware.
If run from GSmartControl, test execution status is frequently checked during the test.
AFAIK the KingDian S200 is, like S280 and S400, a Silicon Motion based SSD. Due to the widespread use of this controller it is unlikely that this is a common problem with Silicon Motion firmware. We got various outputs from such SSDs which show successful extended tests in the self-test logs (see for example tickets #597, #936 and #949).
All we could do for now is to add a drivedb entry which prints a related warning.
Did you use the latest S200 firmware?
Do you have any old smartctl output or other info about model and firmware identify strings?
comment:3 by , 5 years ago
If run from GSmartControl, test execution status is frequently checked during the test.
Yes and during one of checks the system/gsmartcontrol shows I am finding hdd (or something similar).
I have done couple of Extended test (+-5) without any problem, but now 2 SDD crashed at the same moment.
I think on the other ones were no errors before crash.
No, I am using factory firmware.
I have the last ssd, where is firmware R0724A0 (read by Gsmartcontrol) and I dont want to try Extended test :-) This one passed 7 extended tests.
Here is output of gsmartcontrol of still running ssd:
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.9.193-0409193-lowlatency] (local build) Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: KingDian S200 60GB Serial Number: 2018101800107 Firmware Version: R0724A0 User Capacity: 60,022,480,896 bytes [60.0 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Form Factor: 2.5 inches Device is: Not in smartctl database [for details use: -P showall] ATA Version is: ACS-2 T13/2015-D revision 3 SATA Version is: SATA 3.2, 6.0 Gb/s (current: 1.5 Gb/s) Local Time is: Mon Sep 30 18:54:13 2019 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 120) seconds. Offline data collection capabilities: (0x11) SMART execute Offline immediate. No Auto Offline data collection support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. No Selective Self-test supported. SMART capabilities: (0x0002) Does not save SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 10) minutes. SMART Attributes Data Structure revision number: 1 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x0032 100 100 050 Old_age Always - 0 5 Reallocated_Sector_Ct 0x0032 100 100 050 Old_age Always - 0 9 Power_On_Hours 0x0032 100 100 050 Old_age Always - 1087 12 Power_Cycle_Count 0x0032 100 100 050 Old_age Always - 406 160 Unknown_Attribute 0x0032 100 100 050 Old_age Always - 0 161 Unknown_Attribute 0x0033 100 100 050 Pre-fail Always - 86 163 Unknown_Attribute 0x0032 100 100 050 Old_age Always - 18 164 Unknown_Attribute 0x0032 100 100 050 Old_age Always - 38689 165 Unknown_Attribute 0x0032 100 100 050 Old_age Always - 124 166 Unknown_Attribute 0x0032 100 100 050 Old_age Always - 3 167 Unknown_Attribute 0x0032 100 100 050 Old_age Always - 54 168 Unknown_Attribute 0x0032 100 100 050 Old_age Always - 7000 169 Unknown_Attribute 0x0032 100 100 050 Old_age Always - 100 175 Program_Fail_Count_Chip 0x0032 100 100 050 Old_age Always - 0 176 Erase_Fail_Count_Chip 0x0032 100 100 050 Old_age Always - 0 177 Wear_Leveling_Count 0x0032 100 100 050 Old_age Always - 0 178 Used_Rsvd_Blk_Cnt_Chip 0x0032 100 100 050 Old_age Always - 0 181 Program_Fail_Cnt_Total 0x0032 100 100 050 Old_age Always - 0 182 Erase_Fail_Count_Total 0x0032 100 100 050 Old_age Always - 0 192 Power-Off_Retract_Count 0x0032 100 100 050 Old_age Always - 27 194 Temperature_Celsius 0x0022 100 100 050 Old_age Always - 40 195 Hardware_ECC_Recovered 0x0032 100 100 050 Old_age Always - 0 196 Reallocated_Event_Count 0x0032 100 100 050 Old_age Always - 0 197 Current_Pending_Sector 0x0032 100 100 050 Old_age Always - 0 198 Offline_Uncorrectable 0x0032 100 100 050 Old_age Always - 0 199 UDMA_CRC_Error_Count 0x0032 100 100 050 Old_age Always - 0 232 Available_Reservd_Space 0x0032 100 100 050 Old_age Always - 86 241 Total_LBAs_Written 0x0030 100 100 050 Old_age Offline - 24040 242 Total_LBAs_Read 0x0030 100 100 050 Old_age Offline - 33882 245 Unknown_Attribute 0x0032 100 100 050 Old_age Always - 41103 SMART Error Log Version: 1 Warning: ATA error count 0 inconsistent with error log pointer 2 ATA Error Count: 0 CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 0 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 04 51 00 00 00 00 a0 Error: ABRT Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- b0 d0 01 00 4f c2 00 08 00:00:00.000 SMART READ DATA b0 d1 01 01 4f c2 00 08 00:00:00.000 SMART READ ATTRIBUTE THRESHOLDS [OBS-4] b0 da 00 00 4f c2 00 08 00:00:00.000 SMART RETURN STATUS b0 d5 01 00 4f c2 00 08 00:00:00.000 SMART READ LOG b0 d5 01 01 4f c2 00 08 00:00:00.000 SMART READ LOG Error -4 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 04 51 00 00 00 00 a0 Error: ABRT Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- b0 d0 01 00 4f c2 00 08 00:00:00.000 SMART READ DATA b0 d1 01 01 4f c2 00 08 00:00:00.000 SMART READ ATTRIBUTE THRESHOLDS [OBS-4] b0 da 00 00 4f c2 00 08 00:00:00.000 SMART RETURN STATUS b0 d5 01 00 4f c2 00 08 00:00:00.000 SMART READ LOG b0 d5 01 01 4f c2 00 08 00:00:00.000 SMART READ LOG SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Completed without error 00% 821 - # 2 Extended offline Completed without error 00% 740 - # 3 Extended offline Completed without error 00% 670 - # 4 Extended offline Completed without error 00% 362 - # 5 Extended offline Completed without error 00% 152 - # 6 Extended offline Completed without error 00% 12 - # 7 Extended offline Completed without error 00% 0 - Selective Self-tests/Logging not supported
comment:4 by , 5 years ago
| Summary: | BUG: Dead sdd during Extended test (KingDian S200) → BUG: Dead ssd during Extended test (KingDian S200) |
|---|
comment:5 by , 5 years ago
I remember, I upgraded ext utils (from debian repository). Is it possible, that can be the problem? I think the collision between ext utils and the firmware of ssd.
There is the list of installed packages:
e2fslibs:amd64 1.43.4-2 1.43.4-2+deb9u1
e2fsprogs:amd64 1.43.4-2 1.43.4-2+deb9u1
libcomerr2:amd64 1.43.4-2 1.43.4-2+deb9u1
libss2:amd64 1.43.4-2 1.43.4-2+deb9u1
comment:6 by , 5 years ago
Unlikely. These are unrelated to smartctl and (AFAIK) only do regular raw-I/O through the kernel and no ATA pass-through.
comment:7 by , 5 years ago
I don't think there is anything we can do here. Device may die during test or in other time. Test can potentially cause failure faster, just due to increased disk/controller activity during it, however, most likely same would just happens during normal I/O at some point.
comment:8 by , 5 years ago
| Resolution: | → wontfix |
|---|---|
| Status: | new → closed |
comment:9 by , 5 years ago
| Milestone: | undecided |
|---|
comment:10 by , 23 months ago
A related report for a HP SSD S700 250GB:
https://forums.freebsd.org/threads/might-smartctl-selftest-be-harmful-to-ssds.87630/
Test was running by GSmartControl 0.8.7.