smartctl 7.4 2023-08-01 r5530 [x86_64-linux-6.8.0-51-generic] (local build) Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org Warning: DEFAULT entry missing in drive database file(s) === START OF INFORMATION SECTION === Model Family: Exascend SI4 series SSD Device Model: EXSI4A960GB-00-GIN001 Firmware Version: 3ABF2GC0 User Capacity: 960.197.124.096 bytes [960 GB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: Solid State Device TRIM Command: Available, deterministic, zeroed Device is: In smartctl database ATA Version is: ACS-3 (minor revision not indicated) SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Wed Mar 12 16:07:26 2025 CET SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Unavailable === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x02) Offline data collection activity was completed without error. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x3d) SMART execute Offline immediate. No Auto Offline data collection support. Abort Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. No Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 176) minutes. Conveyance self-test routine recommended polling time: ( 1) minutes. SCT capabilities: (0x0001) SCT Status supported. SMART Attributes Data Structure revision number: 6 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate ------ 000 000 000 - 0 5 Reallocated_Sector_Ct ------ 100 100 000 - 0 9 Power_On_Hours ------ 100 100 000 - 194 12 Power_Cycle_Count ------ 100 100 000 - 35 165 Max_Erase_Count ------ 100 100 000 - 18 166 Min_Erase_Count ------ 100 100 000 - 0 167 Avg_Erase_Count ------ 100 100 000 - 18 169 Remain_Life ------ 100 100 000 - 0 170 Percent_Rsvd_Space_Avail------ 100 100 000 - 100 171 Program_Fail_Count ------ 100 100 000 - 0 172 Erase_Fail_Count ------ 100 100 000 - 0 174 Unexpect_Power_Loss_Ct ------ 100 100 000 - 5 183 LT_LnkDwnGrd_Dead/SATA1/2------ 100 100 000 - 1 (3 0) 194 Temperature_Celsius ------ 100 100 001 - 31 (Min/Max 17/65) 198 Offline_Uncorrectable ------ 100 100 000 - 0 199 UDMA_CRC_Error_Count ------ 100 100 000 - 0 241 Total_LBAs_Written ------ 100 100 000 - 19133 242 Total_LBAs_Read ------ 100 100 000 - 1721 249 Total_NAND_Writes ------ 100 100 000 - 19544 250 Lnk_DwnGrd_Dead/SATA1/2 ------ 100 100 000 - 0 251 Total_SATA_Iface_CRC_Ct ------ 100 100 000 - 12 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x04 GPL,SL R/O 8 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 2 Extended self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0 GPL,SL VS 1 Device vendor specific log 0xa1 GPL,SL VS 128 Device vendor specific log 0xa2-0xdf GPL,SL VS 1 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log (GP Log 0x03) not supported SMART Error Log not supported SMART Extended Self-test Log Version: 1 (2 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 194 - Selective Self-tests/Logging not supported SCT Status Version: 3 SCT Version (vendor specific): 1 (0x0001) Device State: Active (0) Current Temperature: 31 Celsius Power Cycle Min/Max Temperature: ?/ ? Celsius Lifetime Min/Max Temperature: 17/65 Celsius Under/Over Temperature Limit Count: 0/0 SCT Data Table command not supported SCT Error Recovery Control command not supported Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 35 --- Lifetime Power-On Resets 0x01 0x010 4 194 --- Power-on Hours 0x01 0x018 6 40126690104 --- Logical Sectors Written 0x01 0x028 6 3610082485 --- Logical Sectors Read 0x01 0x038 6 697932364 --- Date and Time TimeStamp 0x05 ===== = = === == Temperature Statistics (rev 1) == 0x05 0x008 1 31 --- Current Temperature 0x05 0x010 1 - --- Average Short Term Temperature 0x05 0x018 1 - --- Average Long Term Temperature 0x05 0x020 1 32 --- Highest Temperature 0x05 0x028 1 30 --- Lowest Temperature 0x05 0x030 1 - --- Highest Average Short Term Temperature 0x05 0x038 1 - --- Lowest Average Short Term Temperature 0x05 0x040 1 - --- Highest Average Long Term Temperature 0x05 0x048 1 - --- Lowest Average Long Term Temperature 0x06 ===== = = === == Transport Statistics (rev 1) == 0x06 0x008 4 0 --- Number of Hardware Resets 0x07 ===== = = === == Solid State Device Statistics (rev 1) == 0x07 0x008 1 0 --- Percentage Used Endurance Indicator |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) not supported Warning! SATA Phy Event Counters error: invalid SMART checksum. SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x000a 2 0 Device-to-host register FISes sent due to a COMRESET