[root@localhost smartmontools-7.4]# ./smartctl -a /dev/sdc smartctl 7.4 2024-04-06 r5611 [x86_64-linux-4.18.0-348.el8.x86_64] (local build) Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: SOLIDIGM SSDSC2KB960GZ Serial Number: BTYI405207RG960CGN LU WWN Device Id: 5 c8d6b7 00f496e90 Firmware Version: 7CV10130 User Capacity: 960,197,124,096 bytes [960 GB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: Solid State Device Form Factor: 2.5 inches TRIM Command: Available, deterministic, zeroed Device is: Not in smartctl database 7.3/5610 ATA Version is: ACS-3 T13/2161-D revision 5 SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Tue Aug 6 06:04:38 2024 EDT SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x79) SMART execute Offline immediate. No Auto Offline data collection support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 2) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 1 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 5 Reallocated_Sector_Ct 0x0032 037 037 000 Old_age Always - 0 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 232 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 54 170 Unknown_Attribute 0x0033 100 100 010 Pre-fail Always - 0 171 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0 172 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0 174 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 32 175 Program_Fail_Count_Chip 0x0033 100 100 010 Pre-fail Always - 236223137913 183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0 184 End-to-End_Error 0x0033 100 100 090 Pre-fail Always - 0 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0 190 Airflow_Temperature_Cel 0x0022 070 070 000 Old_age Always - 30 (Min/Max 29/30) 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 32 194 Temperature_Celsius 0x0022 100 100 000 Old_age Always - 30 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 199 UDMA_CRC_Error_Count 0x003e 100 100 000 Old_age Always - 0 225 Unknown_SSD_Attribute 0x0032 100 100 000 Old_age Always - 90630 226 Unknown_SSD_Attribute 0x0032 100 100 000 Old_age Always - 30 227 Unknown_SSD_Attribute 0x0032 100 100 000 Old_age Always - 6 228 Power-off_Retract_Count 0x0032 100 100 000 Old_age Always - 13516 229 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0 230 Unknown_SSD_Attribute 0x0032 100 100 000 Old_age Always - 0 232 Available_Reservd_Space 0x0033 100 100 010 Pre-fail Always - 0 233 Media_Wearout_Indicator 0x0032 100 100 000 Old_age Always - 0 234 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0 235 Unknown_Attribute 0x0033 100 100 010 Pre-fail Always - 236223137913 241 Total_LBAs_Written 0x0032 100 100 000 Old_age Always - 90630 242 Total_LBAs_Read 0x0032 100 100 000 Old_age Always - 6408 243 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 148810 246 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. The above only provides legacy SMART information - try 'smartctl -x' for more