$ smartctl -a /dev/nvme0n1 smartctl 7.4 2023-08-01 r5530 [x86_64-linux-6.8.4-3-pve] (local build) Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Number: Samsung SSD 960 PRO 512GB Serial Number: *************** Firmware Version: 2B6QCXP7 PCI Vendor/Subsystem ID: 0x144d IEEE OUI Identifier: 0x002538 Total NVM Capacity: 512,110,190,592 [512 GB] Unallocated NVM Capacity: 0 Controller ID: 2 NVMe Version: 1.2 Number of Namespaces: 1 Namespace 1 Size/Capacity: 512,110,190,592 [512 GB] Namespace 1 Utilization: 377,907,011,584 [377 GB] Namespace 1 Formatted LBA Size: 512 Namespace 1 IEEE EUI-64: 002538 5671b12708 Local Time is: Sat May 25 12:16:07 2024 -03 Firmware Updates (0x16): 3 Slots, no Reset required Optional Admin Commands (0x0007): Security Format Frmw_DL Optional NVM Commands (0x001f): Comp Wr_Unc DS_Mngmt Wr_Zero Sav/Sel_Feat Log Page Attributes (0x03): S/H_per_NS Cmd_Eff_Lg Maximum Data Transfer Size: 512 Pages Warning Comp. Temp. Threshold: 73 Celsius Critical Comp. Temp. Threshold: 76 Celsius Supported Power States St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat 0 + 6.90W - - 0 0 0 0 0 0 1 + 5.50W - - 1 1 1 1 0 0 2 + 5.10W - - 2 2 2 2 0 0 3 - 0.0500W - - 3 3 3 3 210 1200 4 - 0.0080W - - 4 4 4 4 2000 6000 Supported LBA Sizes (NSID 0x1) Id Fmt Data Metadt Rel_Perf 0 + 512 0 0 === START OF SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED SMART/Health Information (NVMe Log 0x02) Critical Warning: 0x00 Temperature: 32 Celsius Available Spare: 100% Available Spare Threshold: 10% Percentage Used: 0% Data Units Read: 10,104,857 [5.17 TB] Data Units Written: 4,813,422 [2.46 TB] Host Read Commands: 121,242,029 Host Write Commands: 122,017,532 Controller Busy Time: 681 Power Cycles: 2,421 Power On Hours: 7,415 Unsafe Shutdowns: 1,024 Media and Data Integrity Errors: 0 Error Information Log Entries: 4,813 Warning Comp. Temperature Time: 0 Critical Comp. Temperature Time: 0 Temperature Sensor 1: 32 Celsius Temperature Sensor 2: 38 Celsius Error Information (NVMe Log 0x01, 16 of 64 entries) Num ErrCount SQId CmdId Status PELoc LBA NSID VS Message 0 4813 0 0x2010 0x4004 - 0 1 - Invalid Field in Command 1 4812 0 0x0010 0x4004 - 0 0 - Invalid Field in Command 2 4811 0 0x001b 0x421a 0x028 0 0 - Feature Identifier Not Saveable 3 4810 0 0x0012 0x4004 - 0 0 - Invalid Field in Command 4 4809 0 0x3007 0x4004 - 0 1 - Invalid Field in Command 5 4808 0 0x1003 0x4004 - 0 0 - Invalid Field in Command 6 4807 0 0x001b 0x421a 0x028 0 0 - Feature Identifier Not Saveable 7 4806 0 0x0012 0x4004 - 0 0 - Invalid Field in Command 8 4805 0 0x4001 0x4004 - 0 1 - Invalid Field in Command 9 4804 0 0x0018 0x4004 - 0 0 - Invalid Field in Command 10 4803 0 0x001b 0x421a 0x028 0 0 - Feature Identifier Not Saveable 11 4802 0 0x0012 0x4004 - 0 0 - Invalid Field in Command 12 4801 0 0x1007 0x4004 - 0 1 - Invalid Field in Command 13 4800 0 0x0014 0x4004 - 0 0 - Invalid Field in Command 14 4799 0 0x001b 0x421a 0x028 0 0 - Feature Identifier Not Saveable 15 4798 0 0x0012 0x4004 - 0 0 - Invalid Field in Command ... (48 entries not read) Self-tests not supported