Custom Query (1405 matches)
Results (64 - 66 of 1405)
Ticket |
---|
#147 |
Description |
Test #19 failed, but since then the sector is fixed (somehow, reallocated or read successfully). Test #2 now shows success. Smartctl is ignoring the new success status, and constantly logging the failure. (which propagates up the monitoring chain) Can smartctl be modified, as default or via an option, to use the last "Completed" instead of an old "Completed" ? (I've snipped a number of lines from the output below: START OF READ SMART DATA SECTIONSMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Interrupted (host reset) 90% 22506 - # 2 Extended offline Completed without error 00% 22488 - #19 Extended offline Completed: read failure 90% 20054 824368247 #20 Extended offline Interrupted (host reset) 90% 19903 - Regards, John Jore |
#149 |
Description |
version 5.41, 3256 If I run self-test on SATA drive, smartctl says that testing has begun, but actually it hasn't. Do not take atention at "interrupted self-test" in logs, it was made a long time ago. If I run self-test on SAS disk, self-test starts and finishes successfully. The problem can be:
If you think that the problem lies out of smartmontools, may you create as much as possible simple code which runs self test only? I could make request to LSI support team using it. LSI doesnt want to deal with third-party soft like smartmontools directly. PS. Is it possible to check that these ioctls are correct? open("/dev/megaraid_sas_ioctl_node", O_RDWR) = 4 ioctl(4, MTRRIOC_SET_ENTRY, 0x7fffe4265050) = 0 ioctl(4, MTRRIOC_SET_ENTRY, 0x7fffe4264e30) = 0 write(1, "/dev/sg0 [megaraid_disk_19] [SAT]: Device open changed type from 'megaraid' to 'sat'\n", 85/dev/sg0 [megaraid_disk_19] [SAT]: Device open changed type from 'megaraid' to 'sat') = 85 ioctl(4, MTRRIOC_SET_ENTRY, 0x7fffe4261c20) = 0 ioctl(4, MTRRIOC_SET_ENTRY, 0x7fffe4261c30) = 0 write(1, "=== START OF OFFLINE IMMEDIATE AND SELF-TEST SECTION ===\n", 57=== START OF OFFLINE IMMEDIATE AND SELF-TEST SECTION ===) = 57 write(1, "Sending command: \"Execute SMART Extended self-test routine immediately in off-line mode\".\n", 90Sending command: "Execute SMART Extended self-test routine immediately in off-line mode".) = 90 write(1, "Drive command \"Execute SMART Extended self-test routine immediately in off-line mode\" successful.\n", 98Drive command "Execute SMART Extended self-test routine immediately in off-line mode" successful.) = 98 write(1, "Testing has begun.\n", 19Testing has begun.) = 19 write(1, "Please wait 4 minutes for test to complete.\n", 44Please wait 4 minutes for test to complete.) = 44 ===================================================================================================== smartctl -t long -dmegaraid,19 /dev/sg0 smartctl 5.41 2011-02-08 r3256M [x86_64-unknown-linux-gnu] (local build) Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net /dev/sg0 [megaraid_disk_19] [SAT]: Device open changed type from 'megaraid' to 'sat' START OF OFFLINE IMMEDIATE AND SELF-TEST SECTIONSending command: "Execute SMART Extended self-test routine immediately in off-line mode". Drive command "Execute SMART Extended self-test routine immediately in off-line mode" successful. Testing has begun. Please wait 4 minutes for test to complete. Test will complete after Mon Feb 14 19:58:34 2011 Use smartctl -X to abort test. smartctl -a -dmegaraid,19 /dev/sg0 [...] Self-test execution status: ( 32) The self-test routine was interrupted
[...] smartctl -l selftest -dmegaraid,19 /dev/sg0 smartctl 5.41 2011-02-08 r3256M [x86_64-unknown-linux-gnu] (local build) Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net /dev/sg0 [megaraid_disk_19] [SAT]: Device open changed type from 'megaraid' to 'sat' START OF READ SMART DATA SECTIONSMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] ===================================================================================================== |
#152 |
Description |
Smartd does not complaint about errors by email sometimes by unknown reason. For example this incident did not trigger notification: Feb 24 20:32:25 mx14 smartd[19581]: Device: /dev/sg0 [megaraid_disk_51] [SAT], 4 Currently unreadable (pending) sectors (changed +1) Feb 24 20:32:25 mx14 smartd[19581]: Device: /dev/sg0 [megaraid_disk_51] [SAT], previous self-test completed with error (read test element) Feb 24 20:32:26 mx14 smartd[19581]: Device: /dev/sg0 [megaraid_disk_51] [SAT], Self-Test Log error count increased from 2 to 3 typical configuration: /dev/sg0 -d sat+megaraid,50 -a -s L/../../7/00 -m postmaster /dev/sg0 -d sat+megaraid,51 -a -s L/../../7/00 -m postmaster /dev/sg0 -d sat+megaraid,52 -a -s L/../../7/00 -m postmaster SVN rev 3267M |