Ticket #964: HGST_RMA_disk2

File HGST_RMA_disk2, 12.5 KB (added by Veek, 7 years ago)

my hdparm/smartmontools outputs on the pristine re-RMA disk

Line 
1smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.9.0-4-amd64] (local build)
2Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
3
4=== START OF INFORMATION SECTION ===
5Model Family: Hitachi/HGST Travelstar Z5K500
6Device Model: HGST HTS545050A7E680
7Serial Number: RBE50K1L01KNRH
8LU WWN Device Id: 5 000cca 8a4c0b6b2
9Firmware Version: GR2OA3N0
10User Capacity: 500,107,862,016 bytes [500 GB]
11Sector Sizes: 512 bytes logical, 4096 bytes physical
12Rotation Rate: 5400 rpm
13Form Factor: 2.5 inches
14Device is: In smartctl database [for details use: -P show]
15ATA Version is: ATA8-ACS T13/1699-D revision 6
16SATA Version is: SATA 2.6, 6.0 Gb/s (current: 3.0 Gb/s)
17Local Time is: Tue Jan 9 16:49:59 2018 IST
18SMART support is: Available - device has SMART capability.
19SMART support is: Enabled
20
21=== START OF READ SMART DATA SECTION ===
22SMART overall-health self-assessment test result: PASSED
23
24General SMART Values:
25Offline data collection status: (0x00) Offline data collection activity
26 was never started.
27 Auto Offline Data Collection: Disabled.
28Self-test execution status: ( 0) The previous self-test routine completed
29 without error or no self-test has ever
30 been run.
31Total time to complete Offline
32data collection: ( 45) seconds.
33Offline data collection
34capabilities: (0x5b) SMART execute Offline immediate.
35 Auto Offline data collection on/off support.
36 Suspend Offline collection upon new
37 command.
38 Offline surface scan supported.
39 Self-test supported.
40 No Conveyance Self-test supported.
41 Selective Self-test supported.
42SMART capabilities: (0x0003) Saves SMART data before entering
43 power-saving mode.
44 Supports SMART auto save timer.
45Error logging capability: (0x01) Error logging supported.
46 General Purpose Logging supported.
47Short self-test routine
48recommended polling time: ( 2) minutes.
49Extended self-test routine
50recommended polling time: ( 112) minutes.
51SCT capabilities: (0x003d) SCT Status supported.
52 SCT Error Recovery Control supported.
53 SCT Feature Control supported.
54 SCT Data Table supported.
55
56SMART Attributes Data Structure revision number: 16
57Vendor Specific SMART Attributes with Thresholds:
58ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
59 1 Raw_Read_Error_Rate 0x000b 100 100 062 Pre-fail Always - 0
60 2 Throughput_Performance 0x0005 100 100 040 Pre-fail Offline - 0
61 3 Spin_Up_Time 0x0007 100 100 033 Pre-fail Always - 1
62 4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 2
63 5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 0
64 7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0
65 8 Seek_Time_Performance 0x0005 100 100 040 Pre-fail Offline - 0
66 9 Power_On_Hours 0x0012 100 100 000 Old_age Always - 0
67 10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0
68 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 2
69191 G-Sense_Error_Rate 0x000a 100 100 000 Old_age Always - 0
70192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 0
71193 Load_Cycle_Count 0x0012 100 100 000 Old_age Always - 5
72194 Temperature_Celsius 0x0002 240 240 000 Old_age Always - 25 (Min/Max 24/31)
73196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0
74197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0
75198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0
76199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 0
77223 Load_Retry_Count 0x000a 100 100 000 Old_age Always - 0
78
79SMART Error Log Version: 1
80No Errors Logged
81
82SMART Self-test log structure revision number 1
83No self-tests have been logged. [To run self-tests, use: smartctl -t]
84
85SMART Selective self-test log data structure revision number 1
86 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
87 1 0 0 Not_testing
88 2 0 0 Not_testing
89 3 0 0 Not_testing
90 4 0 0 Not_testing
91 5 0 0 Not_testing
92Selective self-test flags (0x0):
93 After scanning selected spans, do NOT read-scan remainder of disk.
94If Selective self-test is pending on power-up, resume after 0 minute delay.
95
96
97/dev/sda:
98
99ATA device, with non-removable media
100 Model Number: HGST HTS545050A7E680
101 Serial Number: RBE50K1L01KNRH
102 Firmware Revision: GR2OA3N0
103 Transport: Serial, ATA8-AST, SATA 1.0a, SATA II Extensions, SATA Rev 2.5, SATA Rev 2.6; Revision: ATA8-AST T13 Project D1697 Revision 0b
104Standards:
105 Used: unknown (minor revision code 0x0028)
106 Supported: 8 7 6 5
107 Likely used: 8
108Configuration:
109 Logical max current
110 cylinders 16383 16383
111 heads 16 16
112 sectors/track 63 63
113 --
114 CHS current addressable sectors: 16514064
115 LBA user addressable sectors: 268435455
116 LBA48 user addressable sectors: 976773168
117 Logical Sector size: 512 bytes
118 Physical Sector size: 4096 bytes
119 Logical Sector-0 offset: 0 bytes
120 device size with M = 1024*1024: 476940 MBytes
121 device size with M = 1000*1000: 500107 MBytes (500 GB)
122 cache/buffer size = 8192 KBytes (type=DualPortCache)
123 Form Factor: 2.5 inch
124 Nominal Media Rotation Rate: 5400
125Capabilities:
126 LBA, IORDY(can be disabled)
127 Queue depth: 32
128 Standby timer values: spec'd by Standard, no device specific minimum
129 R/W multiple sector transfer: Max = 16 Current = 8
130 Advanced power management level: 254
131 DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 udma5 *udma6
132 Cycle time: min=120ns recommended=120ns
133 PIO: pio0 pio1 pio2 pio3 pio4
134 Cycle time: no flow control=120ns IORDY flow control=120ns
135Commands/features:
136 Enabled Supported:
137 * SMART feature set
138 Security Mode feature set
139 * Power Management feature set
140 * Write cache
141 * Look-ahead
142 * Host Protected Area feature set
143 * WRITE_BUFFER command
144 * READ_BUFFER command
145 * NOP cmd
146 * DOWNLOAD_MICROCODE
147 * Advanced Power Management feature set
148 Power-Up In Standby feature set
149 SET_MAX security extension
150 * 48-bit Address feature set
151 * Device Configuration Overlay feature set
152 * Mandatory FLUSH_CACHE
153 * FLUSH_CACHE_EXT
154 * SMART error logging
155 * SMART self-test
156 * General Purpose Logging feature set
157 * WRITE_{DMA|MULTIPLE}_FUA_EXT
158 * 64-bit World wide name
159 * IDLE_IMMEDIATE with UNLOAD
160 * WRITE_UNCORRECTABLE_EXT command
161 * {READ,WRITE}_DMA_EXT_GPL commands
162 * Segmented DOWNLOAD_MICROCODE
163 * Gen1 signaling speed (1.5Gb/s)
164 * Gen2 signaling speed (3.0Gb/s)
165 * Gen3 signaling speed (6.0Gb/s)
166 * Native Command Queueing (NCQ)
167 * Host-initiated interface power management
168 * Phy event counters
169 * NCQ priority information
170 Non-Zero buffer offsets in DMA Setup FIS
171 * DMA Setup Auto-Activate optimization
172 Device-initiated interface power management
173 In-order data delivery
174 * Software settings preservation
175 * SMART Command Transport (SCT) feature set
176 * SCT Write Same (AC2)
177 * SCT Error Recovery Control (AC3)
178 * SCT Features Control (AC4)
179 * SCT Data Tables (AC5)
180Security:
181 Master password revision code = 65534
182 supported
183 not enabled
184 not locked
185 frozen
186 not expired: security count
187 supported: enhanced erase
188 110min for SECURITY ERASE UNIT. 112min for ENHANCED SECURITY ERASE UNIT.
189Logical Unit WWN Device Identifier: 5000cca8a4c0b6b2
190 NAA : 5
191 IEEE OUI : 000cca
192 Unique ID : 8a4c0b6b2
193Checksum: correct
194smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.9.0-4-amd64] (local build)
195Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
196
197=== START OF INFORMATION SECTION ===
198Model Family: Hitachi/HGST Travelstar Z5K500
199Device Model: HGST HTS545050A7E680
200Serial Number: RBE50K1L01KNRH
201LU WWN Device Id: 5 000cca 8a4c0b6b2
202Firmware Version: GR2OA3N0
203User Capacity: 500,107,862,016 bytes [500 GB]
204Sector Sizes: 512 bytes logical, 4096 bytes physical
205Rotation Rate: 5400 rpm
206Form Factor: 2.5 inches
207Device is: In smartctl database [for details use: -P show]
208ATA Version is: ATA8-ACS T13/1699-D revision 6
209SATA Version is: SATA 2.6, 6.0 Gb/s (current: 3.0 Gb/s)
210Local Time is: Wed Jan 10 07:39:28 2018 IST
211SMART support is: Available - device has SMART capability.
212SMART support is: Enabled
213
214=== START OF READ SMART DATA SECTION ===
215SMART overall-health self-assessment test result: PASSED
216
217General SMART Values:
218Offline data collection status: (0x00) Offline data collection activity
219 was never started.
220 Auto Offline Data Collection: Disabled.
221Self-test execution status: ( 0) The previous self-test routine completed
222 without error or no self-test has ever
223 been run.
224Total time to complete Offline
225data collection: ( 45) seconds.
226Offline data collection
227capabilities: (0x5b) SMART execute Offline immediate.
228 Auto Offline data collection on/off support.
229 Suspend Offline collection upon new
230 command.
231 Offline surface scan supported.
232 Self-test supported.
233 No Conveyance Self-test supported.
234 Selective Self-test supported.
235SMART capabilities: (0x0003) Saves SMART data before entering
236 power-saving mode.
237 Supports SMART auto save timer.
238Error logging capability: (0x01) Error logging supported.
239 General Purpose Logging supported.
240Short self-test routine
241recommended polling time: ( 2) minutes.
242Extended self-test routine
243recommended polling time: ( 112) minutes.
244SCT capabilities: (0x003d) SCT Status supported.
245 SCT Error Recovery Control supported.
246 SCT Feature Control supported.
247 SCT Data Table supported.
248
249SMART Attributes Data Structure revision number: 16
250Vendor Specific SMART Attributes with Thresholds:
251ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
252 1 Raw_Read_Error_Rate 0x000b 100 100 062 Pre-fail Always - 0
253 2 Throughput_Performance 0x0005 100 100 040 Pre-fail Offline - 0
254 3 Spin_Up_Time 0x0007 100 100 033 Pre-fail Always - 1
255 4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 7
256 5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 0
257 7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0
258 8 Seek_Time_Performance 0x0005 100 100 040 Pre-fail Offline - 0
259 9 Power_On_Hours 0x0012 100 100 000 Old_age Always - 4
260 10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0
261 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 5
262191 G-Sense_Error_Rate 0x000a 100 100 000 Old_age Always - 0
263192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 65536
264193 Load_Cycle_Count 0x0012 100 100 000 Old_age Always - 15
265194 Temperature_Celsius 0x0002 133 133 000 Old_age Always - 45 (Min/Max 19/47)
266196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0
267197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0
268198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0
269199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 0
270223 Load_Retry_Count 0x000a 100 100 000 Old_age Always - 0
271
272SMART Error Log Version: 1
273No Errors Logged
274
275SMART Self-test log structure revision number 1
276No self-tests have been logged. [To run self-tests, use: smartctl -t]
277
278SMART Selective self-test log data structure revision number 1
279 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
280 1 0 0 Not_testing
281 2 0 0 Not_testing
282 3 0 0 Not_testing
283 4 0 0 Not_testing
284 5 0 0 Not_testing
285Selective self-test flags (0x0):
286 After scanning selected spans, do NOT read-scan remainder of disk.
287If Selective self-test is pending on power-up, resume after 0 minute delay.
288