1 | smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.10.0-514.16.1.el7.x86_64] (local build)
|
---|
2 | Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
|
---|
3 |
|
---|
4 | === START OF INFORMATION SECTION ===
|
---|
5 | Device Model: WDC WD2005VBYZ-02RRWB2
|
---|
6 | Serial Number: WD-WMC6N0J4US3E
|
---|
7 | LU WWN Device Id: 5 0014ee 059b69060
|
---|
8 | Firmware Version: RR07
|
---|
9 | User Capacity: 2,000,398,934,016 bytes [2.00 TB]
|
---|
10 | Sector Size: 512 bytes logical/physical
|
---|
11 | Rotation Rate: 7200 rpm
|
---|
12 | Device is: Not in smartctl database [for details use: -P showall]
|
---|
13 | ATA Version is: ACS-3 (unknown minor revision code: 0x006d)
|
---|
14 | SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s)
|
---|
15 | Local Time is: Wed Sep 27 23:21:00 2017 HKT
|
---|
16 | SMART support is: Available - device has SMART capability.
|
---|
17 | SMART support is: Enabled
|
---|
18 | AAM feature is: Unavailable
|
---|
19 | APM level is: 96 (intermediate level with standby)
|
---|
20 | Rd look-ahead is: Enabled
|
---|
21 | Write cache is: Enabled
|
---|
22 | ATA Security is: Disabled, NOT FROZEN [SEC1]
|
---|
23 | Wt Cache Reorder: Enabled
|
---|
24 |
|
---|
25 | === START OF READ SMART DATA SECTION ===
|
---|
26 | SMART overall-health self-assessment test result: PASSED
|
---|
27 |
|
---|
28 | General SMART Values:
|
---|
29 | Offline data collection status: (0x00) Offline data collection activity
|
---|
30 | was never started.
|
---|
31 | Auto Offline Data Collection: Disabled.
|
---|
32 | Self-test execution status: ( 0) The previous self-test routine completed
|
---|
33 | without error or no self-test has ever
|
---|
34 | been run.
|
---|
35 | Total time to complete Offline
|
---|
36 | data collection: ( 0) seconds.
|
---|
37 | Offline data collection
|
---|
38 | capabilities: (0x7b) SMART execute Offline immediate.
|
---|
39 | Auto Offline data collection on/off support.
|
---|
40 | Suspend Offline collection upon new
|
---|
41 | command.
|
---|
42 | Offline surface scan supported.
|
---|
43 | Self-test supported.
|
---|
44 | Conveyance Self-test supported.
|
---|
45 | Selective Self-test supported.
|
---|
46 | SMART capabilities: (0x0003) Saves SMART data before entering
|
---|
47 | power-saving mode.
|
---|
48 | Supports SMART auto save timer.
|
---|
49 | Error logging capability: (0x01) Error logging supported.
|
---|
50 | General Purpose Logging supported.
|
---|
51 | Short self-test routine
|
---|
52 | recommended polling time: ( 2) minutes.
|
---|
53 | Extended self-test routine
|
---|
54 | recommended polling time: ( 207) minutes.
|
---|
55 | Conveyance self-test routine
|
---|
56 | recommended polling time: ( 5) minutes.
|
---|
57 | SCT capabilities: (0x203d) SCT Status supported.
|
---|
58 | SCT Error Recovery Control supported.
|
---|
59 | SCT Feature Control supported.
|
---|
60 | SCT Data Table supported.
|
---|
61 |
|
---|
62 | SMART Attributes Data Structure revision number: 16
|
---|
63 | Vendor Specific SMART Attributes with Thresholds:
|
---|
64 | ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
---|
65 | 1 Raw_Read_Error_Rate POSR-K 100 253 051 - 0
|
---|
66 | 3 Spin_Up_Time POS--K 100 253 021 - 0
|
---|
67 | 4 Start_Stop_Count -O--CK 100 100 000 - 1
|
---|
68 | 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0
|
---|
69 | 7 Seek_Error_Rate -OSR-K 100 200 000 - 0
|
---|
70 | 9 Power_On_Hours -O--CK 100 100 000 - 5
|
---|
71 | 10 Spin_Retry_Count -O--CK 100 253 000 - 0
|
---|
72 | 11 Calibration_Retry_Count -O--CK 100 253 000 - 0
|
---|
73 | 12 Power_Cycle_Count -O--CK 100 100 000 - 1
|
---|
74 | 16 Unknown_Attribute -O---K 000 200 000 - 3896991970
|
---|
75 | 183 Runtime_Bad_Block -O--CK 100 100 000 - 0
|
---|
76 | 192 Power-Off_Retract_Count -O--CK 200 200 000 - 0
|
---|
77 | 193 Load_Cycle_Count -O--CK 200 200 000 - 1
|
---|
78 | 194 Temperature_Celsius -O---K 119 117 000 - 28
|
---|
79 | 196 Reallocated_Event_Count -O--CK 200 200 000 - 0
|
---|
80 | 197 Current_Pending_Sector -O--CK 200 200 000 - 0
|
---|
81 | 198 Offline_Uncorrectable ----CK 100 253 000 - 0
|
---|
82 | 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0
|
---|
83 | 200 Multi_Zone_Error_Rate ---R-- 100 253 000 - 0
|
---|
84 | ||||||_ K auto-keep
|
---|
85 | |||||__ C event count
|
---|
86 | ||||___ R error rate
|
---|
87 | |||____ S speed/performance
|
---|
88 | ||_____ O updated online
|
---|
89 | |______ P prefailure warning
|
---|
90 |
|
---|
91 | General Purpose Log Directory Version 1
|
---|
92 | SMART Log Directory Version 1 [multi-sector log support]
|
---|
93 | Address Access R/W Size Description
|
---|
94 | 0x00 GPL,SL R/O 1 Log Directory
|
---|
95 | 0x01 SL R/O 1 Summary SMART error log
|
---|
96 | 0x02 SL R/O 5 Comprehensive SMART error log
|
---|
97 | 0x03 GPL R/O 6 Ext. Comprehensive SMART error log
|
---|
98 | 0x04 GPL,SL R/O 8 Device Statistics log
|
---|
99 | 0x06 SL R/O 1 SMART self-test log
|
---|
100 | 0x07 GPL R/O 1 Extended self-test log
|
---|
101 | 0x08 GPL R/O 2 Power Conditions log
|
---|
102 | 0x09 SL R/W 1 Selective self-test log
|
---|
103 | 0x0a GPL R/W 8 Device Statistics Notification
|
---|
104 | 0x0c GPL - 113 Reserved
|
---|
105 | 0x0d GPL,SL R/O 8 LPS Mis-alignment log
|
---|
106 | 0x10 GPL R/O 1 NCQ Command Error log
|
---|
107 | 0x11 GPL R/O 1 SATA Phy Event Counters
|
---|
108 | 0x13 GPL R/O 1 SATA NCQ Send and Receive log
|
---|
109 | 0x24 GPL R/O 192 Current Device Internal Status Data log
|
---|
110 | 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
|
---|
111 | 0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
---|
112 | 0xa0-0xb6 GPL,SL VS 16 Device vendor specific log
|
---|
113 | 0xb7 GPL,SL VS 39 Device vendor specific log
|
---|
114 | 0xc0 GPL,SL VS 1 Device vendor specific log
|
---|
115 | 0xe0 GPL,SL R/W 1 SCT Command/Status
|
---|
116 | 0xe1 GPL,SL R/W 1 SCT Data Transfer
|
---|
117 |
|
---|
118 | SMART Extended Comprehensive Error Log Version: 1 (6 sectors)
|
---|
119 | No Errors Logged
|
---|
120 |
|
---|
121 | SMART Extended Self-test Log Version: 1 (1 sectors)
|
---|
122 | Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
|
---|
123 | # 1 Short offline Completed without error 00% 5 -
|
---|
124 |
|
---|
125 | SMART Selective self-test log data structure revision number 1
|
---|
126 | SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
---|
127 | 1 0 0 Not_testing
|
---|
128 | 2 0 0 Not_testing
|
---|
129 | 3 0 0 Not_testing
|
---|
130 | 4 0 0 Not_testing
|
---|
131 | 5 0 0 Not_testing
|
---|
132 | Selective self-test flags (0x0):
|
---|
133 | After scanning selected spans, do NOT read-scan remainder of disk.
|
---|
134 | If Selective self-test is pending on power-up, resume after 0 minute delay.
|
---|
135 |
|
---|
136 | SCT Status Version: 3
|
---|
137 | SCT Version (vendor specific): 258 (0x0102)
|
---|
138 | SCT Support Level: 1
|
---|
139 | Device State: Active (0)
|
---|
140 | Current Temperature: 28 Celsius
|
---|
141 | Power Cycle Min/Max Temperature: 27/29 Celsius
|
---|
142 | Lifetime Min/Max Temperature: 27/30 Celsius
|
---|
143 | Under/Over Temperature Limit Count: 0/0
|
---|
144 | SCT Temperature History Version: 2
|
---|
145 | Temperature Sampling Period: 1 minute
|
---|
146 | Temperature Logging Interval: 1 minute
|
---|
147 | Min/Max recommended Temperature: 0/60 Celsius
|
---|
148 | Min/Max Temperature Limit: -41/85 Celsius
|
---|
149 | Temperature History Size (Index): 478 (342)
|
---|
150 |
|
---|
151 | Index Estimated Time Temperature Celsius
|
---|
152 | 343 2017-09-27 15:24 ? -
|
---|
153 | ... ..(134 skipped). .. -
|
---|
154 | 0 2017-09-27 17:39 ? -
|
---|
155 | 1 2017-09-27 17:40 27 ********
|
---|
156 | ... ..( 8 skipped). .. ********
|
---|
157 | 10 2017-09-27 17:49 27 ********
|
---|
158 | 11 2017-09-27 17:50 28 *********
|
---|
159 | ... ..( 16 skipped). .. *********
|
---|
160 | 28 2017-09-27 18:07 28 *********
|
---|
161 | 29 2017-09-27 18:08 29 **********
|
---|
162 | ... ..(280 skipped). .. **********
|
---|
163 | 310 2017-09-27 22:49 29 **********
|
---|
164 | 311 2017-09-27 22:50 28 *********
|
---|
165 | ... ..( 30 skipped). .. *********
|
---|
166 | 342 2017-09-27 23:21 28 *********
|
---|
167 |
|
---|
168 | SCT Error Recovery Control:
|
---|
169 | Read: 70 (7.0 seconds)
|
---|
170 | Write: 70 (7.0 seconds)
|
---|
171 |
|
---|
172 | Device Statistics (GP Log 0x04)
|
---|
173 | Page Offset Size Value Description
|
---|
174 | 1 ===== = = == General Statistics (rev 1) ==
|
---|
175 | 1 0x008 4+ 1 Lifetime Power-On Resets
|
---|
176 | 1 0x010 4+ 5 Power-on Hours
|
---|
177 | 1 0x018 6+ 3896951424 Logical Sectors Written
|
---|
178 | 1 0x020 6+ 3836655 Number of Write Commands
|
---|
179 | 1 0x028 6+ 40546 Logical Sectors Read
|
---|
180 | 1 0x030 6+ 2756 Number of Read Commands
|
---|
181 | 1 0x038 6+ 18000000 Date and Time TimeStamp
|
---|
182 | 1 0x048 7+ 7~ Unknown
|
---|
183 | 3 ===== = = == Rotating Media Statistics (rev 1) ==
|
---|
184 | 3 0x008 4+ 5 Spindle Motor Power-on Hours
|
---|
185 | 3 0x010 4+ 5 Head Flying Hours
|
---|
186 | 3 0x018 4+ 1 Head Load Events
|
---|
187 | 3 0x020 4+ 0 Number of Reallocated Logical Sectors
|
---|
188 | 3 0x028 4+ 0 Read Recovery Attempts
|
---|
189 | 3 0x030 4+ 0 Number of Mechanical Start Failures
|
---|
190 | 3 0x038 4+ 0 Number of Realloc. Candidate Logical Sectors
|
---|
191 | 3 0x040 7+ 0 Unknown
|
---|
192 | 4 ===== = = == General Errors Statistics (rev 1) ==
|
---|
193 | 4 0x008 4+ 0 Number of Reported Uncorrectable Errors
|
---|
194 | 4 0x010 4+ 0 Resets Between Cmd Acceptance and Completion
|
---|
195 | 5 ===== = = == Temperature Statistics (rev 1) ==
|
---|
196 | 5 0x008 1+ 28 Current Temperature
|
---|
197 | 5 0x010 1+ - Average Short Term Temperature
|
---|
198 | 5 0x018 1+ - Average Long Term Temperature
|
---|
199 | 5 0x020 1+ 29 Highest Temperature
|
---|
200 | 5 0x028 1+ 28 Lowest Temperature
|
---|
201 | 5 0x030 1+ - Highest Average Short Term Temperature
|
---|
202 | 5 0x038 1+ - Lowest Average Short Term Temperature
|
---|
203 | 5 0x040 1+ - Highest Average Long Term Temperature
|
---|
204 | 5 0x048 1+ - Lowest Average Long Term Temperature
|
---|
205 | 5 0x050 4+ 0 Time in Over-Temperature
|
---|
206 | 5 0x058 1+ 60 Specified Maximum Operating Temperature
|
---|
207 | 5 0x060 4+ 0 Time in Under-Temperature
|
---|
208 | 5 0x068 1+ 0 Specified Minimum Operating Temperature
|
---|
209 | 6 ===== = = == Transport Statistics (rev 1) ==
|
---|
210 | 6 0x008 4+ 0 Number of Hardware Resets
|
---|
211 | 6 0x010 4+ 0 Number of ASR Events
|
---|
212 | 6 0x018 4+ 0 Number of Interface CRC Errors
|
---|
213 | |_ ~ normalized value
|
---|
214 |
|
---|
215 | SATA Phy Event Counters (GP Log 0x11)
|
---|
216 | ID Size Value Description
|
---|
217 | 0x0001 2 0 Command failed due to ICRC error
|
---|
218 | 0x0002 2 0 R_ERR response for data FIS
|
---|
219 | 0x0003 2 0 R_ERR response for device-to-host data FIS
|
---|
220 | 0x0004 2 0 R_ERR response for host-to-device data FIS
|
---|
221 | 0x0005 2 0 R_ERR response for non-data FIS
|
---|
222 | 0x0006 2 0 R_ERR response for device-to-host non-data FIS
|
---|
223 | 0x0007 2 0 R_ERR response for host-to-device non-data FIS
|
---|
224 | 0x0008 2 0 Device-to-host non-data FIS retries
|
---|
225 | 0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy
|
---|
226 | 0x000a 2 1 Device-to-host register FISes sent due to a COMRESET
|
---|
227 | 0x000b 2 0 CRC errors within host-to-device FIS
|
---|
228 | 0x000d 2 0 Non-CRC errors within host-to-device FIS
|
---|
229 | 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
|
---|
230 | 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
|
---|
231 | 0x8000 4 0 Vendor specific
|
---|
232 |
|
---|