1 | smartctl 5.43 2012-06-30 r3573 [x86_64-linux-2.6.32-431.20.3.el6.x86_64] (local
|
---|
2 | build)
|
---|
3 | Copyright (C) 2002-12 by Bruce Allen, http://smartmontools.sourceforge.net
|
---|
4 |
|
---|
5 | === START OF INFORMATION SECTION ===
|
---|
6 | Device Model: WDC WD1005VBYZ-02RRWB2
|
---|
7 | Serial Number: WD-WMC6M0HAK2F3
|
---|
8 | LU WWN Device Id: 5 0014ee 059b08df6
|
---|
9 | Firmware Version: RR07
|
---|
10 | User Capacity: 1,000,204,886,016 bytes [1.00 TB]
|
---|
11 | Sector Size: 512 bytes logical/physical
|
---|
12 | Device is: Not in smartctl database [for details use: -P showall]
|
---|
13 | ATA Version is: 8
|
---|
14 | ATA Standard is: ACS-3 (unknown minor revision code: 0x006d)
|
---|
15 | Local Time is: Wed Sep 27 23:26:02 2017 HKT
|
---|
16 | SMART support is: Available - device has SMART capability.
|
---|
17 | SMART support is: Enabled
|
---|
18 | AAM feature is: Unavailable
|
---|
19 | APM level is: 96 (intermediate level with standby)
|
---|
20 | Rd look-ahead is: Enabled
|
---|
21 | Write cache is: Enabled
|
---|
22 | ATA Security is: Disabled, NOT FROZEN [SEC1]
|
---|
23 |
|
---|
24 | === START OF READ SMART DATA SECTION ===
|
---|
25 | SMART overall-health self-assessment test result: PASSED
|
---|
26 |
|
---|
27 | General SMART Values:
|
---|
28 | Offline data collection status: (0x00) Offline data collection activity
|
---|
29 | was never started.
|
---|
30 | Auto Offline Data Collection: Disabled.
|
---|
31 | Self-test execution status: ( 0) The previous self-test routine completed
|
---|
32 | without error or no self-test has ever
|
---|
33 | been run.
|
---|
34 | Total time to complete Offline
|
---|
35 | data collection: ( 0) seconds.
|
---|
36 | Offline data collection
|
---|
37 | capabilities: (0x7b) SMART execute Offline immediate.
|
---|
38 | Auto Offline data collection on/off supp
|
---|
39 | ort.
|
---|
40 | Suspend Offline collection upon new
|
---|
41 | command.
|
---|
42 | Offline surface scan supported.
|
---|
43 | Self-test supported.
|
---|
44 | Conveyance Self-test supported.
|
---|
45 | Selective Self-test supported.
|
---|
46 | SMART capabilities: (0x0003) Saves SMART data before entering
|
---|
47 | power-saving mode.
|
---|
48 | Supports SMART auto save timer.
|
---|
49 | Error logging capability: (0x01) Error logging supported.
|
---|
50 | General Purpose Logging supported.
|
---|
51 | Short self-test routine
|
---|
52 | recommended polling time: ( 2) minutes.
|
---|
53 | Extended self-test routine
|
---|
54 | recommended polling time: ( 106) minutes.
|
---|
55 | Conveyance self-test routine
|
---|
56 | recommended polling time: ( 5) minutes.
|
---|
57 | SCT capabilities: (0x203d) SCT Status supported.
|
---|
58 | SCT Error Recovery Control supported.
|
---|
59 | SCT Feature Control supported.
|
---|
60 | SCT Data Table supported.
|
---|
61 |
|
---|
62 | SMART Attributes Data Structure revision number: 16
|
---|
63 | Vendor Specific SMART Attributes with Thresholds:
|
---|
64 | ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
---|
65 | 1 Raw_Read_Error_Rate POSR-K 100 253 051 - 0
|
---|
66 | 3 Spin_Up_Time POS--K 100 253 021 - 0
|
---|
67 | 4 Start_Stop_Count -O--CK 100 100 000 - 1
|
---|
68 | 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0
|
---|
69 | 7 Seek_Error_Rate -OSR-K 100 200 000 - 0
|
---|
70 | 9 Power_On_Hours -O--CK 100 100 000 - 5
|
---|
71 | 10 Spin_Retry_Count -O--CK 100 253 000 - 0
|
---|
72 | 11 Calibration_Retry_Count -O--CK 100 253 000 - 0
|
---|
73 | 12 Power_Cycle_Count -O--CK 100 100 000 - 1
|
---|
74 | 16 Unknown_Attribute -O---K 000 200 000 - 1954236630
|
---|
75 | 183 Runtime_Bad_Block -O--CK 100 100 000 - 0
|
---|
76 | 192 Power-Off_Retract_Count -O--CK 200 200 000 - 0
|
---|
77 | 193 Load_Cycle_Count -O--CK 200 200 000 - 1
|
---|
78 | 194 Temperature_Celsius -O---K 113 113 000 - 30
|
---|
79 | 196 Reallocated_Event_Count -O--CK 200 200 000 - 0
|
---|
80 | 197 Current_Pending_Sector -O--CK 200 200 000 - 0
|
---|
81 | 198 Offline_Uncorrectable ----CK 100 253 000 - 0
|
---|
82 | 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0
|
---|
83 | 200 Multi_Zone_Error_Rate ---R-- 100 253 000 - 0
|
---|
84 | ||||||_ K auto-keep
|
---|
85 | |||||__ C event count
|
---|
86 | ||||___ R error rate
|
---|
87 | |||____ S speed/performance
|
---|
88 | ||_____ O updated online
|
---|
89 | |______ P prefailure warning
|
---|
90 |
|
---|
91 | General Purpose Log Directory Version 1
|
---|
92 | SMART Log Directory Version 1 [multi-sector log support]
|
---|
93 | GP/S Log at address 0x00 has 1 sectors [Log Directory]
|
---|
94 | SMART Log at address 0x01 has 1 sectors [Summary SMART error log]
|
---|
95 | SMART Log at address 0x02 has 5 sectors [Comprehensive SMART error log]
|
---|
96 | GP Log at address 0x03 has 6 sectors [Ext. Comprehensive SMART error log]
|
---|
97 | GP/S Log at address 0x04 has 8 sectors [Device Statistics log]
|
---|
98 | SMART Log at address 0x06 has 1 sectors [SMART self-test log]
|
---|
99 | GP Log at address 0x07 has 1 sectors [Extended self-test log]
|
---|
100 | GP Log at address 0x08 has 2 sectors [Power Conditions log]
|
---|
101 | SMART Log at address 0x09 has 1 sectors [Selective self-test log]
|
---|
102 | GP Log at address 0x0a has 8 sectors [Reserved]
|
---|
103 | GP Log at address 0x0c has 113 sectors [Reserved]
|
---|
104 | GP/S Log at address 0x0d has 8 sectors [LPS Mis-alignment log]
|
---|
105 | GP Log at address 0x10 has 1 sectors [NCQ Command Error log]
|
---|
106 | GP Log at address 0x11 has 1 sectors [SATA Phy Event Counters]
|
---|
107 | GP Log at address 0x13 has 1 sectors [SATA NCQ Send and Receive log]
|
---|
108 | GP Log at address 0x24 has 192 sectors [Current Device Internal Status Data
|
---|
109 | log]
|
---|
110 | GP/S Log at address 0x30 has 9 sectors [IDENTIFY DEVICE data log]
|
---|
111 | GP/S Log at address 0x80 has 16 sectors [Host vendor specific log]
|
---|
112 | GP/S Log at address 0x81 has 16 sectors [Host vendor specific log]
|
---|
113 | GP/S Log at address 0x82 has 16 sectors [Host vendor specific log]
|
---|
114 | GP/S Log at address 0x83 has 16 sectors [Host vendor specific log]
|
---|
115 | GP/S Log at address 0x84 has 16 sectors [Host vendor specific log]
|
---|
116 | GP/S Log at address 0x85 has 16 sectors [Host vendor specific log]
|
---|
117 | GP/S Log at address 0x86 has 16 sectors [Host vendor specific log]
|
---|
118 | GP/S Log at address 0x87 has 16 sectors [Host vendor specific log]
|
---|
119 | GP/S Log at address 0x88 has 16 sectors [Host vendor specific log]
|
---|
120 | GP/S Log at address 0x89 has 16 sectors [Host vendor specific log]
|
---|
121 | GP/S Log at address 0x8a has 16 sectors [Host vendor specific log]
|
---|
122 | GP/S Log at address 0x8b has 16 sectors [Host vendor specific log]
|
---|
123 | GP/S Log at address 0x8c has 16 sectors [Host vendor specific log]
|
---|
124 | GP/S Log at address 0x8d has 16 sectors [Host vendor specific log]
|
---|
125 | GP/S Log at address 0x8e has 16 sectors [Host vendor specific log]
|
---|
126 | GP/S Log at address 0x8f has 16 sectors [Host vendor specific log]
|
---|
127 | GP/S Log at address 0x90 has 16 sectors [Host vendor specific log]
|
---|
128 | GP/S Log at address 0x91 has 16 sectors [Host vendor specific log]
|
---|
129 | GP/S Log at address 0x92 has 16 sectors [Host vendor specific log]
|
---|
130 | GP/S Log at address 0x93 has 16 sectors [Host vendor specific log]
|
---|
131 | GP/S Log at address 0x94 has 16 sectors [Host vendor specific log]
|
---|
132 | GP/S Log at address 0x95 has 16 sectors [Host vendor specific log]
|
---|
133 | GP/S Log at address 0x96 has 16 sectors [Host vendor specific log]
|
---|
134 | GP/S Log at address 0x97 has 16 sectors [Host vendor specific log]
|
---|
135 | GP/S Log at address 0x98 has 16 sectors [Host vendor specific log]
|
---|
136 | GP/S Log at address 0x99 has 16 sectors [Host vendor specific log]
|
---|
137 | GP/S Log at address 0x9a has 16 sectors [Host vendor specific log]
|
---|
138 | GP/S Log at address 0x9b has 16 sectors [Host vendor specific log]
|
---|
139 | GP/S Log at address 0x9c has 16 sectors [Host vendor specific log]
|
---|
140 | GP/S Log at address 0x9d has 16 sectors [Host vendor specific log]
|
---|
141 | GP/S Log at address 0x9e has 16 sectors [Host vendor specific log]
|
---|
142 | GP/S Log at address 0x9f has 16 sectors [Host vendor specific log]
|
---|
143 | GP/S Log at address 0xa0 has 16 sectors [Device vendor specific log]
|
---|
144 | GP/S Log at address 0xa1 has 16 sectors [Device vendor specific log]
|
---|
145 | GP/S Log at address 0xa2 has 16 sectors [Device vendor specific log]
|
---|
146 | GP/S Log at address 0xa3 has 16 sectors [Device vendor specific log]
|
---|
147 | GP/S Log at address 0xa4 has 16 sectors [Device vendor specific log]
|
---|
148 | GP/S Log at address 0xa5 has 16 sectors [Device vendor specific log]
|
---|
149 | GP/S Log at address 0xa6 has 16 sectors [Device vendor specific log]
|
---|
150 | GP/S Log at address 0xa7 has 16 sectors [Device vendor specific log]
|
---|
151 | GP/S Log at address 0xa8 has 16 sectors [Device vendor specific log]
|
---|
152 | GP/S Log at address 0xa9 has 16 sectors [Device vendor specific log]
|
---|
153 | GP/S Log at address 0xaa has 16 sectors [Device vendor specific log]
|
---|
154 | GP/S Log at address 0xab has 16 sectors [Device vendor specific log]
|
---|
155 | GP/S Log at address 0xac has 16 sectors [Device vendor specific log]
|
---|
156 | GP/S Log at address 0xad has 16 sectors [Device vendor specific log]
|
---|
157 | GP/S Log at address 0xae has 16 sectors [Device vendor specific log]
|
---|
158 | GP/S Log at address 0xaf has 16 sectors [Device vendor specific log]
|
---|
159 | GP/S Log at address 0xb0 has 16 sectors [Device vendor specific log]
|
---|
160 | GP/S Log at address 0xb1 has 16 sectors [Device vendor specific log]
|
---|
161 | GP/S Log at address 0xb2 has 16 sectors [Device vendor specific log]
|
---|
162 | GP/S Log at address 0xb3 has 16 sectors [Device vendor specific log]
|
---|
163 | GP/S Log at address 0xb4 has 16 sectors [Device vendor specific log]
|
---|
164 | GP/S Log at address 0xb5 has 16 sectors [Device vendor specific log]
|
---|
165 | GP/S Log at address 0xb6 has 16 sectors [Device vendor specific log]
|
---|
166 | GP/S Log at address 0xb7 has 39 sectors [Device vendor specific log]
|
---|
167 | GP/S Log at address 0xc0 has 1 sectors [Device vendor specific log]
|
---|
168 | GP/S Log at address 0xe0 has 1 sectors [SCT Command/Status]
|
---|
169 | GP/S Log at address 0xe1 has 1 sectors [SCT Data Transfer]
|
---|
170 |
|
---|
171 | SMART Extended Comprehensive Error Log Version: 1 (6 sectors)
|
---|
172 | No Errors Logged
|
---|
173 |
|
---|
174 | SMART Extended Self-test Log Version: 1 (1 sectors)
|
---|
175 | Num Test_Description Status Remaining LifeTime(hours) LBA
|
---|
176 | _of_first_error
|
---|
177 | # 1 Short offline Completed without error 00% 5 -
|
---|
178 |
|
---|
179 | SMART Selective self-test log data structure revision number 1
|
---|
180 | SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
---|
181 | 1 0 0 Not_testing
|
---|
182 | 2 0 0 Not_testing
|
---|
183 | 3 0 0 Not_testing
|
---|
184 | 4 0 0 Not_testing
|
---|
185 | 5 0 0 Not_testing
|
---|
186 | Selective self-test flags (0x0):
|
---|
187 | After scanning selected spans, do NOT read-scan remainder of disk.
|
---|
188 | If Selective self-test is pending on power-up, resume after 0 minute delay.
|
---|
189 |
|
---|
190 | SCT Status Version: 3
|
---|
191 | SCT Version (vendor specific): 258 (0x0102)
|
---|
192 | SCT Support Level: 1
|
---|
193 | Device State: Active (0)
|
---|
194 | Current Temperature: 30 Celsius
|
---|
195 | Power Cycle Min/Max Temperature: 25/30 Celsius
|
---|
196 | Lifetime Min/Max Temperature: 25/30 Celsius
|
---|
197 | Under/Over Temperature Limit Count: 0/0
|
---|
198 | SCT Temperature History Version: 2
|
---|
199 | Temperature Sampling Period: 1 minute
|
---|
200 | Temperature Logging Interval: 1 minute
|
---|
201 | Min/Max recommended Temperature: 0/60 Celsius
|
---|
202 | Min/Max Temperature Limit: -41/85 Celsius
|
---|
203 | Temperature History Size (Index): 478 (305)
|
---|
204 |
|
---|
205 | Index Estimated Time Temperature Celsius
|
---|
206 | 306 2017-09-27 15:29 ? -
|
---|
207 | ... ..(171 skipped). .. -
|
---|
208 | 0 2017-09-27 18:21 ? -
|
---|
209 | 1 2017-09-27 18:22 25 ******
|
---|
210 | 2 2017-09-27 18:23 25 ******
|
---|
211 | 3 2017-09-27 18:24 25 ******
|
---|
212 | 4 2017-09-27 18:25 26 *******
|
---|
213 | 5 2017-09-27 18:26 27 ********
|
---|
214 | 6 2017-09-27 18:27 27 ********
|
---|
215 | 7 2017-09-27 18:28 28 *********
|
---|
216 | 8 2017-09-27 18:29 28 *********
|
---|
217 | 9 2017-09-27 18:30 28 *********
|
---|
218 | 10 2017-09-27 18:31 29 **********
|
---|
219 | ... ..( 3 skipped). .. **********
|
---|
220 | 14 2017-09-27 18:35 29 **********
|
---|
221 | 15 2017-09-27 18:36 30 ***********
|
---|
222 | ... ..(289 skipped). .. ***********
|
---|
223 | 305 2017-09-27 23:26 30 ***********
|
---|
224 |
|
---|
225 | SCT Error Recovery Control:
|
---|
226 | Read: 70 (7.0 seconds)
|
---|
227 | Write: 70 (7.0 seconds)
|
---|
228 |
|
---|
229 | SATA Phy Event Counters (GP Log 0x11)
|
---|
230 | ID Size Value Description
|
---|
231 | 0x0001 2 0 Command failed due to ICRC error
|
---|
232 | 0x0002 2 0 R_ERR response for data FIS
|
---|
233 | 0x0003 2 0 R_ERR response for device-to-host data FIS
|
---|
234 | 0x0004 2 0 R_ERR response for host-to-device data FIS
|
---|
235 | 0x0005 2 0 R_ERR response for non-data FIS
|
---|
236 | 0x0006 2 0 R_ERR response for device-to-host non-data FIS
|
---|
237 | 0x0007 2 0 R_ERR response for host-to-device non-data FIS
|
---|
238 | 0x0008 2 0 Device-to-host non-data FIS retries
|
---|
239 | 0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy
|
---|
240 | 0x000a 2 1 Device-to-host register FISes sent due to a COMRESET
|
---|
241 | 0x000b 2 0 CRC errors within host-to-device FIS
|
---|
242 | 0x000d 2 0 Non-CRC errors within host-to-device FIS
|
---|
243 | 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
|
---|
244 | 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
|
---|
245 | 0x8000 4 0 Vendor specific
|
---|