1 | smartctl 6.5 2016-05-07 r4318 [x86_64-linux-4.6.4-1-ARCH] (local build)
|
---|
2 | Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
|
---|
3 |
|
---|
4 | === START OF INFORMATION SECTION ===
|
---|
5 | Model Family: Seagate Samsung SpinPoint M9T
|
---|
6 | Device Model: ST2000LM003 HN-M201RAD
|
---|
7 | Serial Number: S362J9DH523107
|
---|
8 | LU WWN Device Id: 5 0004cf 2122953b2
|
---|
9 | Firmware Version: 2BE10001
|
---|
10 | User Capacity: 2.000.398.934.016 bytes [2,00 TB]
|
---|
11 | Sector Sizes: 512 bytes logical, 4096 bytes physical
|
---|
12 | Rotation Rate: 5400 rpm
|
---|
13 | Form Factor: 2.5 inches
|
---|
14 | Device is: In smartctl database [for details use: -P show]
|
---|
15 | ATA Version is: ATA8-ACS T13/1699-D revision 6
|
---|
16 | SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
|
---|
17 | Local Time is: Tue Jul 26 20:14:30 2016 CEST
|
---|
18 | SMART support is: Available - device has SMART capability.
|
---|
19 | SMART support is: Enabled
|
---|
20 | AAM feature is: Disabled
|
---|
21 | APM feature is: Disabled
|
---|
22 | Rd look-ahead is: Enabled
|
---|
23 | Write cache is: Enabled
|
---|
24 | ATA Security is: Disabled, NOT FROZEN [SEC1]
|
---|
25 | Wt Cache Reorder: Enabled
|
---|
26 |
|
---|
27 | === START OF READ SMART DATA SECTION ===
|
---|
28 | SMART overall-health self-assessment test result: PASSED
|
---|
29 |
|
---|
30 | General SMART Values:
|
---|
31 | Offline data collection status: (0x00) Offline data collection activity
|
---|
32 | was never started.
|
---|
33 | Auto Offline Data Collection: Disabled.
|
---|
34 | Self-test execution status: ( 0) The previous self-test routine completed
|
---|
35 | without error or no self-test has ever
|
---|
36 | been run.
|
---|
37 | Total time to complete Offline
|
---|
38 | data collection: (22020) seconds.
|
---|
39 | Offline data collection
|
---|
40 | capabilities: (0x5b) SMART execute Offline immediate.
|
---|
41 | Auto Offline data collection on/off support.
|
---|
42 | Suspend Offline collection upon new
|
---|
43 | command.
|
---|
44 | Offline surface scan supported.
|
---|
45 | Self-test supported.
|
---|
46 | No Conveyance Self-test supported.
|
---|
47 | Selective Self-test supported.
|
---|
48 | SMART capabilities: (0x0003) Saves SMART data before entering
|
---|
49 | power-saving mode.
|
---|
50 | Supports SMART auto save timer.
|
---|
51 | Error logging capability: (0x01) Error logging supported.
|
---|
52 | General Purpose Logging supported.
|
---|
53 | Short self-test routine
|
---|
54 | recommended polling time: ( 1) minutes.
|
---|
55 | Extended self-test routine
|
---|
56 | recommended polling time: ( 367) minutes.
|
---|
57 | SCT capabilities: (0x003f) SCT Status supported.
|
---|
58 | SCT Error Recovery Control supported.
|
---|
59 | SCT Feature Control supported.
|
---|
60 | SCT Data Table supported.
|
---|
61 |
|
---|
62 | SMART Attributes Data Structure revision number: 16
|
---|
63 | Vendor Specific SMART Attributes with Thresholds:
|
---|
64 | ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
---|
65 | 1 Raw_Read_Error_Rate POSR-K 100 100 051 - 0
|
---|
66 | 2 Throughput_Performance -OS--K 252 252 000 - 0
|
---|
67 | 3 Spin_Up_Time PO---K 088 088 025 - 3791
|
---|
68 | 4 Start_Stop_Count -O--CK 100 100 000 - 6
|
---|
69 | 5 Reallocated_Sector_Ct PO--CK 252 252 010 - 0
|
---|
70 | 7 Seek_Error_Rate -OSR-K 252 252 051 - 0
|
---|
71 | 8 Seek_Time_Performance --S--K 252 252 015 - 0
|
---|
72 | 9 Power_On_Hours -O--CK 252 252 000 - 0
|
---|
73 | 10 Spin_Retry_Count -O--CK 252 252 051 - 0
|
---|
74 | 12 Power_Cycle_Count -O--CK 100 100 000 - 9
|
---|
75 | 191 G-Sense_Error_Rate -O---K 252 252 000 - 0
|
---|
76 | 192 Power-Off_Retract_Count -O---K 252 252 000 - 0
|
---|
77 | 194 Temperature_Celsius -O---- 064 064 000 - 33 (Min/Max 23/33)
|
---|
78 | 195 Hardware_ECC_Recovered -O-RCK 100 100 000 - 0
|
---|
79 | 196 Reallocated_Event_Count -O--CK 252 252 000 - 0
|
---|
80 | 197 Current_Pending_Sector -O--CK 252 252 000 - 0
|
---|
81 | 198 Offline_Uncorrectable ----CK 252 252 000 - 0
|
---|
82 | 199 UDMA_CRC_Error_Count -OS-CK 200 200 000 - 0
|
---|
83 | 200 Multi_Zone_Error_Rate -O-R-K 100 100 000 - 0
|
---|
84 | 223 Load_Retry_Count -O--CK 252 252 000 - 0
|
---|
85 | 225 Load_Cycle_Count -O--CK 100 100 000 - 18
|
---|
86 | ||||||_ K auto-keep
|
---|
87 | |||||__ C event count
|
---|
88 | ||||___ R error rate
|
---|
89 | |||____ S speed/performance
|
---|
90 | ||_____ O updated online
|
---|
91 | |______ P prefailure warning
|
---|
92 |
|
---|
93 | General Purpose Log Directory Version 1
|
---|
94 | SMART Log Directory Version 1 [multi-sector log support]
|
---|
95 | Address Access R/W Size Description
|
---|
96 | 0x00 GPL,SL R/O 1 Log Directory
|
---|
97 | 0x01 SL R/O 1 Summary SMART error log
|
---|
98 | 0x02 SL R/O 2 Comprehensive SMART error log
|
---|
99 | 0x03 GPL R/O 2 Ext. Comprehensive SMART error log
|
---|
100 | 0x06 SL R/O 1 SMART self-test log
|
---|
101 | 0x07 GPL R/O 2 Extended self-test log
|
---|
102 | 0x08 GPL R/O 2 Power Conditions log
|
---|
103 | 0x09 SL R/W 1 Selective self-test log
|
---|
104 | 0x10 GPL R/O 1 SATA NCQ Queued Error log
|
---|
105 | 0x11 GPL R/O 1 SATA Phy Event Counters log
|
---|
106 | 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
|
---|
107 | 0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
---|
108 | 0xc0-0xdf GPL,SL VS 16 Device vendor specific log
|
---|
109 | 0xe0 GPL,SL R/W 1 SCT Command/Status
|
---|
110 | 0xe1 GPL,SL R/W 1 SCT Data Transfer
|
---|
111 |
|
---|
112 | SMART Extended Comprehensive Error Log Version: 1 (2 sectors)
|
---|
113 | No Errors Logged
|
---|
114 |
|
---|
115 | SMART Extended Self-test Log Version: 1 (2 sectors)
|
---|
116 | Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
|
---|
117 | # 1 Short offline Completed without error 00% 0 -
|
---|
118 |
|
---|
119 | SMART Selective self-test log data structure revision number 0
|
---|
120 | Note: revision number not 1 implies that no selective self-test has ever been run
|
---|
121 | SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
---|
122 | 1 0 0 Completed [00% left] (0-65535)
|
---|
123 | 2 0 0 Not_testing
|
---|
124 | 3 0 0 Not_testing
|
---|
125 | 4 0 0 Not_testing
|
---|
126 | 5 0 0 Not_testing
|
---|
127 | Selective self-test flags (0x0):
|
---|
128 | After scanning selected spans, do NOT read-scan remainder of disk.
|
---|
129 | If Selective self-test is pending on power-up, resume after 0 minute delay.
|
---|
130 |
|
---|
131 | SCT Status Version: 2
|
---|
132 | SCT Version (vendor specific): 256 (0x0100)
|
---|
133 | SCT Support Level: 1
|
---|
134 | Device State: Active (0)
|
---|
135 | Current Temperature: 33 Celsius
|
---|
136 | Power Cycle Min/Max Temperature: 29/33 Celsius
|
---|
137 | Lifetime Min/Max Temperature: 29/33 Celsius
|
---|
138 | Under/Over Temperature Limit Count: 0/0
|
---|
139 |
|
---|
140 | SCT Temperature History Version: 2
|
---|
141 | Temperature Sampling Period: 5 minutes
|
---|
142 | Temperature Logging Interval: 5 minutes
|
---|
143 | Min/Max recommended Temperature: -5/80 Celsius
|
---|
144 | Min/Max Temperature Limit: -10/85 Celsius
|
---|
145 | Temperature History Size (Index): 128 (3)
|
---|
146 |
|
---|
147 | Index Estimated Time Temperature Celsius
|
---|
148 | 4 2016-07-26 09:35 33 **************
|
---|
149 | 5 2016-07-26 09:40 ? -
|
---|
150 | ... ..(121 skipped). .. -
|
---|
151 | 127 2016-07-26 19:50 ? -
|
---|
152 | 0 2016-07-26 19:55 31 ************
|
---|
153 | 1 2016-07-26 20:00 31 ************
|
---|
154 | 2 2016-07-26 20:05 32 *************
|
---|
155 | 3 2016-07-26 20:10 33 **************
|
---|
156 |
|
---|
157 | SCT Error Recovery Control:
|
---|
158 | Read: Disabled
|
---|
159 | Write: Disabled
|
---|
160 |
|
---|
161 | Device Statistics (GP/SMART Log 0x04) not supported
|
---|
162 |
|
---|
163 | SATA Phy Event Counters (GP Log 0x11)
|
---|
164 | ID Size Value Description
|
---|
165 | 0x0001 4 0 Command failed due to ICRC error
|
---|
166 | 0x0002 4 0 R_ERR response for data FIS
|
---|
167 | 0x0003 4 0 R_ERR response for device-to-host data FIS
|
---|
168 | 0x0004 4 0 R_ERR response for host-to-device data FIS
|
---|
169 | 0x0005 4 0 R_ERR response for non-data FIS
|
---|
170 | 0x0006 4 0 R_ERR response for device-to-host non-data FIS
|
---|
171 | 0x0007 4 0 R_ERR response for host-to-device non-data FIS
|
---|
172 | 0x0008 4 0 Device-to-host non-data FIS retries
|
---|
173 | 0x0009 4 0 Transition from drive PhyRdy to drive PhyNRdy
|
---|
174 | 0x000a 4 0 Device-to-host register FISes sent due to a COMRESET
|
---|
175 | 0x000b 4 0 CRC errors within host-to-device FIS
|
---|
176 | 0x000d 4 0 Non-CRC errors within host-to-device FIS
|
---|
177 | 0x000f 4 0 R_ERR response for host-to-device data FIS, CRC
|
---|
178 | 0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC
|
---|
179 | 0x0012 4 0 R_ERR response for host-to-device non-data FIS, CRC
|
---|
180 | 0x0013 4 0 R_ERR response for host-to-device non-data FIS, non-CRC
|
---|
181 | 0x8e00 4 0 Vendor specific
|
---|
182 | 0x8e01 4 0 Vendor specific
|
---|
183 | 0x8e02 4 0 Vendor specific
|
---|
184 | 0x8e03 4 0 Vendor specific
|
---|
185 | 0x8e04 4 0 Vendor specific
|
---|
186 | 0x8e05 4 0 Vendor specific
|
---|
187 | 0x8e06 4 0 Vendor specific
|
---|
188 | 0x8e07 4 0 Vendor specific
|
---|
189 | 0x8e08 4 0 Vendor specific
|
---|
190 | 0x8e09 4 0 Vendor specific
|
---|
191 | 0x8e0a 4 0 Vendor specific
|
---|
192 | 0x8e0b 4 0 Vendor specific
|
---|
193 | 0x8e0c 4 0 Vendor specific
|
---|
194 | 0x8e0d 4 0 Vendor specific
|
---|
195 | 0x8e0e 4 0 Vendor specific
|
---|
196 | 0x8e0f 4 0 Vendor specific
|
---|
197 | 0x8e10 4 0 Vendor specific
|
---|
198 | 0x8e11 4 0 Vendor specific
|
---|
199 |
|
---|