| 1 | smartctl 5.41 2011-06-09 r3365 [x86_64-linux-3.2.0-4-amd64] (local build)
|
|---|
| 2 | Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net
|
|---|
| 3 |
|
|---|
| 4 | === START OF INFORMATION SECTION ===
|
|---|
| 5 | Device Model: WDC WD40EFRX-68WT0N0
|
|---|
| 6 | Serial Number: WD-WCC4E1039906
|
|---|
| 7 | LU WWN Device Id: 5 0014ee 25f2a812f
|
|---|
| 8 | Firmware Version: 80.00A80
|
|---|
| 9 | User Capacity: 4,000,787,030,016 bytes [4.00 TB]
|
|---|
| 10 | Sector Sizes: 512 bytes logical, 4096 bytes physical
|
|---|
| 11 | Device is: Not in smartctl database [for details use: -P showall]
|
|---|
| 12 | ATA Version is: 9
|
|---|
| 13 | ATA Standard is: Exact ATA specification draft version not indicated
|
|---|
| 14 | Local Time is: Wed Dec 10 13:27:47 2014 EST
|
|---|
| 15 | SMART support is: Available - device has SMART capability.
|
|---|
| 16 | SMART support is: Enabled
|
|---|
| 17 |
|
|---|
| 18 | === START OF READ SMART DATA SECTION ===
|
|---|
| 19 | SMART STATUS RETURN: incomplete response, ATA output registers missing
|
|---|
| 20 | SMART overall-health self-assessment test result: PASSED
|
|---|
| 21 | Warning: This result is based on an Attribute check.
|
|---|
| 22 |
|
|---|
| 23 | General SMART Values:
|
|---|
| 24 | Offline data collection status: (0x00) Offline data collection activity
|
|---|
| 25 | was never started.
|
|---|
| 26 | Auto Offline Data Collection: Disabled.
|
|---|
| 27 | Self-test execution status: ( 0) The previous self-test routine completed
|
|---|
| 28 | without error or no self-test has ever
|
|---|
| 29 | been run.
|
|---|
| 30 | Total time to complete Offline
|
|---|
| 31 | data collection: (54000) seconds.
|
|---|
| 32 | Offline data collection
|
|---|
| 33 | capabilities: (0x7b) SMART execute Offline immediate.
|
|---|
| 34 | Auto Offline data collection on/off support.
|
|---|
| 35 | Suspend Offline collection upon new
|
|---|
| 36 | command.
|
|---|
| 37 | Offline surface scan supported.
|
|---|
| 38 | Self-test supported.
|
|---|
| 39 | Conveyance Self-test supported.
|
|---|
| 40 | Selective Self-test supported.
|
|---|
| 41 | SMART capabilities: (0x0003) Saves SMART data before entering
|
|---|
| 42 | power-saving mode.
|
|---|
| 43 | Supports SMART auto save timer.
|
|---|
| 44 | Error logging capability: (0x01) Error logging supported.
|
|---|
| 45 | General Purpose Logging supported.
|
|---|
| 46 | Short self-test routine
|
|---|
| 47 | recommended polling time: ( 2) minutes.
|
|---|
| 48 | Extended self-test routine
|
|---|
| 49 | recommended polling time: ( 255) minutes.
|
|---|
| 50 | Conveyance self-test routine
|
|---|
| 51 | recommended polling time: ( 5) minutes.
|
|---|
| 52 | SCT capabilities: (0x703d) SCT Status supported.
|
|---|
| 53 | SCT Error Recovery Control supported.
|
|---|
| 54 | SCT Feature Control supported.
|
|---|
| 55 | SCT Data Table supported.
|
|---|
| 56 |
|
|---|
| 57 | SMART Attributes Data Structure revision number: 16
|
|---|
| 58 | Vendor Specific SMART Attributes with Thresholds:
|
|---|
| 59 | ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
|---|
| 60 | 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0
|
|---|
| 61 | 3 Spin_Up_Time POS--K 174 173 021 - 8275
|
|---|
| 62 | 4 Start_Stop_Count -O--CK 100 100 000 - 28
|
|---|
| 63 | 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0
|
|---|
| 64 | 7 Seek_Error_Rate -OSR-K 200 200 000 - 0
|
|---|
| 65 | 9 Power_On_Hours -O--CK 099 099 000 - 894
|
|---|
| 66 | 10 Spin_Retry_Count -O--CK 100 253 000 - 0
|
|---|
| 67 | 11 Calibration_Retry_Count -O--CK 100 253 000 - 0
|
|---|
| 68 | 12 Power_Cycle_Count -O--CK 100 100 000 - 28
|
|---|
| 69 | 192 Power-Off_Retract_Count -O--CK 200 200 000 - 22
|
|---|
| 70 | 193 Load_Cycle_Count -O--CK 200 200 000 - 45
|
|---|
| 71 | 194 Temperature_Celsius -O---K 123 115 000 - 29
|
|---|
| 72 | 196 Reallocated_Event_Count -O--CK 200 200 000 - 0
|
|---|
| 73 | 197 Current_Pending_Sector -O--CK 200 200 000 - 0
|
|---|
| 74 | 198 Offline_Uncorrectable ----CK 100 253 000 - 0
|
|---|
| 75 | 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0
|
|---|
| 76 | 200 Multi_Zone_Error_Rate ---R-- 100 253 000 - 0
|
|---|
| 77 | ||||||_ K auto-keep
|
|---|
| 78 | |||||__ C event count
|
|---|
| 79 | ||||___ R error rate
|
|---|
| 80 | |||____ S speed/performance
|
|---|
| 81 | ||_____ O updated online
|
|---|
| 82 | |______ P prefailure warning
|
|---|
| 83 |
|
|---|
| 84 | General Purpose Log Directory Version 1
|
|---|
| 85 | SMART Log Directory Version 1 [multi-sector log support]
|
|---|
| 86 | GP/S Log at address 0x00 has 1 sectors [Log Directory]
|
|---|
| 87 | SMART Log at address 0x01 has 1 sectors [Summary SMART error log]
|
|---|
| 88 | SMART Log at address 0x02 has 5 sectors [Comprehensive SMART error log]
|
|---|
| 89 | GP Log at address 0x03 has 6 sectors [Ext. Comprehensive SMART error log]
|
|---|
| 90 | SMART Log at address 0x06 has 1 sectors [SMART self-test log]
|
|---|
| 91 | GP Log at address 0x07 has 1 sectors [Extended self-test log]
|
|---|
| 92 | SMART Log at address 0x09 has 1 sectors [Selective self-test log]
|
|---|
| 93 | GP Log at address 0x10 has 1 sectors [NCQ Command Error]
|
|---|
| 94 | GP Log at address 0x11 has 1 sectors [SATA Phy Event Counters]
|
|---|
| 95 | GP Log at address 0x21 has 1 sectors [Write stream error log]
|
|---|
| 96 | GP Log at address 0x22 has 1 sectors [Read stream error log]
|
|---|
| 97 | GP/S Log at address 0x80 has 16 sectors [Host vendor specific log]
|
|---|
| 98 | GP/S Log at address 0x81 has 16 sectors [Host vendor specific log]
|
|---|
| 99 | GP/S Log at address 0x82 has 16 sectors [Host vendor specific log]
|
|---|
| 100 | GP/S Log at address 0x83 has 16 sectors [Host vendor specific log]
|
|---|
| 101 | GP/S Log at address 0x84 has 16 sectors [Host vendor specific log]
|
|---|
| 102 | GP/S Log at address 0x85 has 16 sectors [Host vendor specific log]
|
|---|
| 103 | GP/S Log at address 0x86 has 16 sectors [Host vendor specific log]
|
|---|
| 104 | GP/S Log at address 0x87 has 16 sectors [Host vendor specific log]
|
|---|
| 105 | GP/S Log at address 0x88 has 16 sectors [Host vendor specific log]
|
|---|
| 106 | GP/S Log at address 0x89 has 16 sectors [Host vendor specific log]
|
|---|
| 107 | GP/S Log at address 0x8a has 16 sectors [Host vendor specific log]
|
|---|
| 108 | GP/S Log at address 0x8b has 16 sectors [Host vendor specific log]
|
|---|
| 109 | GP/S Log at address 0x8c has 16 sectors [Host vendor specific log]
|
|---|
| 110 | GP/S Log at address 0x8d has 16 sectors [Host vendor specific log]
|
|---|
| 111 | GP/S Log at address 0x8e has 16 sectors [Host vendor specific log]
|
|---|
| 112 | GP/S Log at address 0x8f has 16 sectors [Host vendor specific log]
|
|---|
| 113 | GP/S Log at address 0x90 has 16 sectors [Host vendor specific log]
|
|---|
| 114 | GP/S Log at address 0x91 has 16 sectors [Host vendor specific log]
|
|---|
| 115 | GP/S Log at address 0x92 has 16 sectors [Host vendor specific log]
|
|---|
| 116 | GP/S Log at address 0x93 has 16 sectors [Host vendor specific log]
|
|---|
| 117 | GP/S Log at address 0x94 has 16 sectors [Host vendor specific log]
|
|---|
| 118 | GP/S Log at address 0x95 has 16 sectors [Host vendor specific log]
|
|---|
| 119 | GP/S Log at address 0x96 has 16 sectors [Host vendor specific log]
|
|---|
| 120 | GP/S Log at address 0x97 has 16 sectors [Host vendor specific log]
|
|---|
| 121 | GP/S Log at address 0x98 has 16 sectors [Host vendor specific log]
|
|---|
| 122 | GP/S Log at address 0x99 has 16 sectors [Host vendor specific log]
|
|---|
| 123 | GP/S Log at address 0x9a has 16 sectors [Host vendor specific log]
|
|---|
| 124 | GP/S Log at address 0x9b has 16 sectors [Host vendor specific log]
|
|---|
| 125 | GP/S Log at address 0x9c has 16 sectors [Host vendor specific log]
|
|---|
| 126 | GP/S Log at address 0x9d has 16 sectors [Host vendor specific log]
|
|---|
| 127 | GP/S Log at address 0x9e has 16 sectors [Host vendor specific log]
|
|---|
| 128 | GP/S Log at address 0x9f has 16 sectors [Host vendor specific log]
|
|---|
| 129 | GP/S Log at address 0xa0 has 16 sectors [Device vendor specific log]
|
|---|
| 130 | GP/S Log at address 0xa1 has 16 sectors [Device vendor specific log]
|
|---|
| 131 | GP/S Log at address 0xa2 has 16 sectors [Device vendor specific log]
|
|---|
| 132 | GP/S Log at address 0xa3 has 16 sectors [Device vendor specific log]
|
|---|
| 133 | GP/S Log at address 0xa4 has 16 sectors [Device vendor specific log]
|
|---|
| 134 | GP/S Log at address 0xa5 has 16 sectors [Device vendor specific log]
|
|---|
| 135 | GP/S Log at address 0xa6 has 16 sectors [Device vendor specific log]
|
|---|
| 136 | GP/S Log at address 0xa7 has 16 sectors [Device vendor specific log]
|
|---|
| 137 | GP/S Log at address 0xa8 has 1 sectors [Device vendor specific log]
|
|---|
| 138 | GP/S Log at address 0xa9 has 1 sectors [Device vendor specific log]
|
|---|
| 139 | GP/S Log at address 0xaa has 1 sectors [Device vendor specific log]
|
|---|
| 140 | GP/S Log at address 0xab has 1 sectors [Device vendor specific log]
|
|---|
| 141 | GP/S Log at address 0xac has 1 sectors [Device vendor specific log]
|
|---|
| 142 | GP/S Log at address 0xad has 1 sectors [Device vendor specific log]
|
|---|
| 143 | GP/S Log at address 0xae has 1 sectors [Device vendor specific log]
|
|---|
| 144 | GP/S Log at address 0xaf has 1 sectors [Device vendor specific log]
|
|---|
| 145 | GP/S Log at address 0xb0 has 1 sectors [Device vendor specific log]
|
|---|
| 146 | GP/S Log at address 0xb1 has 1 sectors [Device vendor specific log]
|
|---|
| 147 | GP/S Log at address 0xb2 has 1 sectors [Device vendor specific log]
|
|---|
| 148 | GP/S Log at address 0xb3 has 1 sectors [Device vendor specific log]
|
|---|
| 149 | GP/S Log at address 0xb4 has 1 sectors [Device vendor specific log]
|
|---|
| 150 | GP/S Log at address 0xb5 has 1 sectors [Device vendor specific log]
|
|---|
| 151 | GP/S Log at address 0xb6 has 1 sectors [Device vendor specific log]
|
|---|
| 152 | GP/S Log at address 0xb7 has 1 sectors [Device vendor specific log]
|
|---|
| 153 | GP/S Log at address 0xbd has 1 sectors [Device vendor specific log]
|
|---|
| 154 | GP/S Log at address 0xc0 has 1 sectors [Device vendor specific log]
|
|---|
| 155 | GP Log at address 0xc1 has 93 sectors [Device vendor specific log]
|
|---|
| 156 | GP/S Log at address 0xe0 has 1 sectors [SCT Command/Status]
|
|---|
| 157 | GP/S Log at address 0xe1 has 1 sectors [SCT Data Transfer]
|
|---|
| 158 |
|
|---|
| 159 | SMART Extended Comprehensive Error Log Version: 1 (6 sectors)
|
|---|
| 160 | No Errors Logged
|
|---|
| 161 |
|
|---|
| 162 | SMART Extended Self-test Log Version: 1 (1 sectors)
|
|---|
| 163 | No self-tests have been logged. [To run self-tests, use: smartctl -t]
|
|---|
| 164 |
|
|---|
| 165 | SMART Selective self-test log data structure revision number 1
|
|---|
| 166 | SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
|---|
| 167 | 1 0 0 Not_testing
|
|---|
| 168 | 2 0 0 Not_testing
|
|---|
| 169 | 3 0 0 Not_testing
|
|---|
| 170 | 4 0 0 Not_testing
|
|---|
| 171 | 5 0 0 Not_testing
|
|---|
| 172 | Selective self-test flags (0x0):
|
|---|
| 173 | After scanning selected spans, do NOT read-scan remainder of disk.
|
|---|
| 174 | If Selective self-test is pending on power-up, resume after 0 minute delay.
|
|---|
| 175 |
|
|---|
| 176 | SCT Status Version: 3
|
|---|
| 177 | SCT Version (vendor specific): 258 (0x0102)
|
|---|
| 178 | SCT Support Level: 1
|
|---|
| 179 | Device State: Active (0)
|
|---|
| 180 | Current Temperature: 29 Celsius
|
|---|
| 181 | Power Cycle Min/Max Temperature: 25/29 Celsius
|
|---|
| 182 | Lifetime Min/Max Temperature: 22/37 Celsius
|
|---|
| 183 | Under/Over Temperature Limit Count: 0/0
|
|---|
| 184 | SCT Temperature History Version: 2
|
|---|
| 185 | Temperature Sampling Period: 1 minute
|
|---|
| 186 | Temperature Logging Interval: 1 minute
|
|---|
| 187 | Min/Max recommended Temperature: 0/60 Celsius
|
|---|
| 188 | Min/Max Temperature Limit: -41/85 Celsius
|
|---|
| 189 | Temperature History Size (Index): 478 (113)
|
|---|
| 190 |
|
|---|
| 191 | Index Estimated Time Temperature Celsius
|
|---|
| 192 | 114 2014-12-10 05:30 34 ***************
|
|---|
| 193 | ... ..(247 skipped). .. ***************
|
|---|
| 194 | 362 2014-12-10 09:38 34 ***************
|
|---|
| 195 | 363 2014-12-10 09:39 33 **************
|
|---|
| 196 | ... ..( 64 skipped). .. **************
|
|---|
| 197 | 428 2014-12-10 10:44 33 **************
|
|---|
| 198 | 429 2014-12-10 10:45 34 ***************
|
|---|
| 199 | ... ..( 3 skipped). .. ***************
|
|---|
| 200 | 433 2014-12-10 10:49 34 ***************
|
|---|
| 201 | 434 2014-12-10 10:50 33 **************
|
|---|
| 202 | ... ..( 40 skipped). .. **************
|
|---|
| 203 | 475 2014-12-10 11:31 33 **************
|
|---|
| 204 | 476 2014-12-10 11:32 34 ***************
|
|---|
| 205 | ... ..( 8 skipped). .. ***************
|
|---|
| 206 | 7 2014-12-10 11:41 34 ***************
|
|---|
| 207 | 8 2014-12-10 11:42 33 **************
|
|---|
| 208 | ... ..( 23 skipped). .. **************
|
|---|
| 209 | 32 2014-12-10 12:06 33 **************
|
|---|
| 210 | 33 2014-12-10 12:07 34 ***************
|
|---|
| 211 | ... ..( 44 skipped). .. ***************
|
|---|
| 212 | 78 2014-12-10 12:52 34 ***************
|
|---|
| 213 | 79 2014-12-10 12:53 33 **************
|
|---|
| 214 | ... ..( 3 skipped). .. **************
|
|---|
| 215 | 83 2014-12-10 12:57 33 **************
|
|---|
| 216 | 84 2014-12-10 12:58 34 ***************
|
|---|
| 217 | 85 2014-12-10 12:59 ? -
|
|---|
| 218 | 86 2014-12-10 13:00 25 ******
|
|---|
| 219 | ... ..( 2 skipped). .. ******
|
|---|
| 220 | 89 2014-12-10 13:03 25 ******
|
|---|
| 221 | 90 2014-12-10 13:04 26 *******
|
|---|
| 222 | 91 2014-12-10 13:05 26 *******
|
|---|
| 223 | 92 2014-12-10 13:06 27 ********
|
|---|
| 224 | 93 2014-12-10 13:07 27 ********
|
|---|
| 225 | 94 2014-12-10 13:08 28 *********
|
|---|
| 226 | ... ..( 9 skipped). .. *********
|
|---|
| 227 | 104 2014-12-10 13:18 28 *********
|
|---|
| 228 | 105 2014-12-10 13:19 29 **********
|
|---|
| 229 | ... ..( 7 skipped). .. **********
|
|---|
| 230 | 113 2014-12-10 13:27 29 **********
|
|---|
| 231 |
|
|---|
| 232 | Error SMART WRITE LOG does not return COUNT and LBA_LOW register
|
|---|
| 233 | Warning: device does not support SCT (Get) Error Recovery Control command
|
|---|
| 234 |
|
|---|
| 235 | SATA Phy Event Counters (GP Log 0x11)
|
|---|
| 236 | ID Size Value Description
|
|---|
| 237 | 0x0001 2 0 Command failed due to ICRC error
|
|---|
| 238 | 0x0002 2 0 R_ERR response for data FIS
|
|---|
| 239 | 0x0003 2 0 R_ERR response for device-to-host data FIS
|
|---|
| 240 | 0x0004 2 0 R_ERR response for host-to-device data FIS
|
|---|
| 241 | 0x0005 2 0 R_ERR response for non-data FIS
|
|---|
| 242 | 0x0006 2 0 R_ERR response for device-to-host non-data FIS
|
|---|
| 243 | 0x0007 2 0 R_ERR response for host-to-device non-data FIS
|
|---|
| 244 | 0x0008 2 0 Device-to-host non-data FIS retries
|
|---|
| 245 | 0x0009 2 3 Transition from drive PhyRdy to drive PhyNRdy
|
|---|
| 246 | 0x000a 2 3 Device-to-host register FISes sent due to a COMRESET
|
|---|
| 247 | 0x000b 2 0 CRC errors within host-to-device FIS
|
|---|
| 248 | 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
|
|---|
| 249 | 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
|
|---|
| 250 | 0x8000 4 1648 Vendor specific
|
|---|
| 251 |
|
|---|
