1 | smartctl 7.4 2023-08-01 r5530 [x86_64-linux-6.11.0-21-generic] (local build)
|
---|
2 | Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org
|
---|
3 |
|
---|
4 | === START OF INFORMATION SECTION ===
|
---|
5 | Model Family: SSSTC ERX GD/CD Series SSDs
|
---|
6 | Device Model: SSSTC ER4-CD1920A
|
---|
7 | Serial Number: [No Information Found]
|
---|
8 | LU WWN Device Id: 0 000000 000000000
|
---|
9 | Firmware Version: G62RD14
|
---|
10 | User Capacity: 1,920,383,410,176 bytes [1.92 TB]
|
---|
11 | Sector Sizes: 512 bytes logical, 4096 bytes physical
|
---|
12 | Rotation Rate: Solid State Device
|
---|
13 | Form Factor: 2.5 inches
|
---|
14 | TRIM Command: Available, deterministic
|
---|
15 | Device is: In smartctl database
|
---|
16 | ATA Version is: ACS-4 T13/BSR INCITS 529 revision 5
|
---|
17 | SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
|
---|
18 | Local Time is: Mon Apr 14 11:28:53 2025 CST
|
---|
19 | SMART support is: Available - device has SMART capability.
|
---|
20 | SMART support is: Enabled
|
---|
21 | AAM feature is: Unavailable
|
---|
22 | APM feature is: Unavailable
|
---|
23 | Rd look-ahead is: Enabled
|
---|
24 | Write cache is: Enabled
|
---|
25 | DSN feature is: Unavailable
|
---|
26 | ATA Security is: Disabled, frozen [SEC2]
|
---|
27 | Wt Cache Reorder: Enabled
|
---|
28 |
|
---|
29 | === START OF READ SMART DATA SECTION ===
|
---|
30 | SMART overall-health self-assessment test result: PASSED
|
---|
31 |
|
---|
32 | General SMART Values:
|
---|
33 | Offline data collection status: (0x00) Offline data collection activity
|
---|
34 | was never started.
|
---|
35 | Auto Offline Data Collection: Disabled.
|
---|
36 | Self-test execution status: ( 0) The previous self-test routine completed
|
---|
37 | without error or no self-test has ever
|
---|
38 | been run.
|
---|
39 | Total time to complete Offline
|
---|
40 | data collection: ( 0) seconds.
|
---|
41 | Offline data collection
|
---|
42 | capabilities: (0x15) SMART execute Offline immediate.
|
---|
43 | No Auto Offline data collection support.
|
---|
44 | Abort Offline collection upon new
|
---|
45 | command.
|
---|
46 | No Offline surface scan supported.
|
---|
47 | Self-test supported.
|
---|
48 | No Conveyance Self-test supported.
|
---|
49 | No Selective Self-test supported.
|
---|
50 | SMART capabilities: (0x0003) Saves SMART data before entering
|
---|
51 | power-saving mode.
|
---|
52 | Supports SMART auto save timer.
|
---|
53 | Error logging capability: (0x01) Error logging supported.
|
---|
54 | General Purpose Logging supported.
|
---|
55 | Short self-test routine
|
---|
56 | recommended polling time: ( 2) minutes.
|
---|
57 | Extended self-test routine
|
---|
58 | recommended polling time: ( 70) minutes.
|
---|
59 | SCT capabilities: (0x003d) SCT Status supported.
|
---|
60 | SCT Error Recovery Control supported.
|
---|
61 | SCT Feature Control supported.
|
---|
62 | SCT Data Table supported.
|
---|
63 |
|
---|
64 | SMART Attributes Data Structure revision number: 1
|
---|
65 | Vendor Specific SMART Attributes with Thresholds:
|
---|
66 | ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
---|
67 | 5 Reallocated_Sector_Ct -O--CK 100 100 000 - 0
|
---|
68 | 9 Power_On_Hours -O--CK 100 100 000 - 0
|
---|
69 | 12 Power_Cycle_Count -O--CK 100 100 000 - 2
|
---|
70 | 100 Max_Min_EC_Count -O--CK 000 000 000 - 0
|
---|
71 | 171 Program_Fail_Count -O--CK 100 100 000 - 0
|
---|
72 | 172 Erase_Fail_Count -O--CK 100 100 000 - 0
|
---|
73 | 173 Average_PE_Count -O--CK 100 100 000 - 0
|
---|
74 | 174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 1
|
---|
75 | 175 PLP_Failure -O--CK 100 100 000 - 0
|
---|
76 | 176 Erase_Fail_Count_Chip -O--CK 100 100 000 - 0
|
---|
77 | 177 Wear_Leveling_Count -O--CK 100 100 000 - 0
|
---|
78 | 178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 000 - 0
|
---|
79 | 179 Used_Rsvd_Blk_Cnt_Tot -O--CK 100 100 000 - 0
|
---|
80 | 180 Over-Provisioning_Rate -O--CK 100 100 000 - 11302
|
---|
81 | 183 SATA_Iface_Downshift -O--CK 100 100 000 - 0
|
---|
82 | 184 End-to-End_Error -O--CK 100 100 000 - 0
|
---|
83 | 187 Reported_Uncorrect -O--CK 100 100 000 - 0
|
---|
84 | 188 Command_Timeout -O--CK 100 100 000 - 0
|
---|
85 | 194 Temperature_Celsius -O---K 100 100 000 - 33
|
---|
86 | 195 Hardware_ECC_Recovered -OSRCK 100 100 000 - 0
|
---|
87 | 198 Offline_Uncorrectable -O--CK 100 100 000 - 0
|
---|
88 | 199 UDMA_CRC_Error_Count -OSRCK 100 100 000 - 0
|
---|
89 | 229 PLP_Failure PO--CK 100 100 001 - 255983616
|
---|
90 | 231 Percent_Lifetime_Remain PO--CK 100 100 005 - 0
|
---|
91 | 232 Available_Reservd_Space PO--CK 100 100 010 - 2365587594
|
---|
92 | 241 Total_LBAs_Written -O--CK 100 100 000 - 0
|
---|
93 | 242 Total_LBAs_Read -O--CK 100 100 000 - 0
|
---|
94 | 243 Total_NAND_Written -O--CK 100 100 000 - 0
|
---|
95 | ||||||_ K auto-keep
|
---|
96 | |||||__ C event count
|
---|
97 | ||||___ R error rate
|
---|
98 | |||____ S speed/performance
|
---|
99 | ||_____ O updated online
|
---|
100 | |______ P prefailure warning
|
---|
101 |
|
---|
102 | General Purpose Log Directory Version 1
|
---|
103 | SMART Log Directory Version 1 [multi-sector log support]
|
---|
104 | Address Access R/W Size Description
|
---|
105 | 0x00 GPL,SL R/O 1 Log Directory
|
---|
106 | 0x01 SL R/O 1 Summary SMART error log
|
---|
107 | 0x02 SL R/O 2 Comprehensive SMART error log
|
---|
108 | 0x03 GPL R/O 1 Ext. Comprehensive SMART error log
|
---|
109 | 0x04 GPL,SL R/O 6 Device Statistics log
|
---|
110 | 0x06 SL R/O 1 SMART self-test log
|
---|
111 | 0x07 GPL R/O 1 Extended self-test log
|
---|
112 | 0x09 SL R/W 1 Selective self-test log
|
---|
113 | 0x10 GPL R/O 1 NCQ Command Error log
|
---|
114 | 0x11 GPL R/O 1 SATA Phy Event Counters log
|
---|
115 | 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
|
---|
116 | 0x61 GPL R/O 1 Capacity/Model Number Mapping log
|
---|
117 | 0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
---|
118 | 0xe0 GPL,SL R/W 1 SCT Command/Status
|
---|
119 | 0xe1 GPL,SL R/W 1 SCT Data Transfer
|
---|
120 | 0xe3 GPL,SL - 1 Reserved
|
---|
121 |
|
---|
122 | SMART Extended Comprehensive Error Log Version: 1 (1 sectors)
|
---|
123 | No Errors Logged
|
---|
124 |
|
---|
125 | SMART Extended Self-test Log Version: 1 (1 sectors)
|
---|
126 | No self-tests have been logged. [To run self-tests, use: smartctl -t]
|
---|
127 |
|
---|
128 | Selective Self-tests/Logging not supported
|
---|
129 |
|
---|
130 | SCT Status Version: 3
|
---|
131 | SCT Version (vendor specific): 1 (0x0001)
|
---|
132 | Device State: Active (0)
|
---|
133 | Current Temperature: 33 Celsius
|
---|
134 | Power Cycle Min/Max Temperature: 68/54 Celsius
|
---|
135 | Lifetime Min/Max Temperature: 68/54 Celsius
|
---|
136 | Under/Over Temperature Limit Count: 0/0
|
---|
137 | SMART Status: 0xc24f (PASSED)
|
---|
138 |
|
---|
139 | SCT Temperature History Version: 2
|
---|
140 | Temperature Sampling Period: 1 minute
|
---|
141 | Temperature Logging Interval: 1 minute
|
---|
142 | Min/Max recommended Temperature: 0/100 Celsius
|
---|
143 | Min/Max Temperature Limit: 0/100 Celsius
|
---|
144 | Temperature History Size (Index): 128 (6)
|
---|
145 |
|
---|
146 | Index Estimated Time Temperature Celsius
|
---|
147 | 7 2025-04-14 09:21 ? -
|
---|
148 | ... ..(122 skipped). .. -
|
---|
149 | 2 2025-04-14 11:24 ? -
|
---|
150 | 3 2025-04-14 11:25 29 **********
|
---|
151 | 4 2025-04-14 11:26 31 ************
|
---|
152 | 5 2025-04-14 11:27 32 *************
|
---|
153 | 6 2025-04-14 11:28 33 **************
|
---|
154 |
|
---|
155 | Write SCT (Get) Error Recovery Control Command failed: scsi error badly formed scsi parameters
|
---|
156 | SCT (Get) Error Recovery Control command failed
|
---|
157 |
|
---|
158 | Device Statistics (GP Log 0x04)
|
---|
159 | Page Offset Size Value Flags Description
|
---|
160 | 0x01 ===== = = === == General Statistics (rev 1) ==
|
---|
161 | 0x01 0x008 4 2 --- Lifetime Power-On Resets
|
---|
162 | 0x01 0x010 4 0 --- Power-on Hours
|
---|
163 | 0x01 0x018 6 0 --- Logical Sectors Written
|
---|
164 | 0x01 0x020 6 0 --- Number of Write Commands
|
---|
165 | 0x01 0x028 6 6434 --- Logical Sectors Read
|
---|
166 | 0x01 0x030 6 152 --- Number of Read Commands
|
---|
167 | 0x01 0x1f8 7 0 NDC+ Unknown
|
---|
168 | 0x04 ===== = = === == General Errors Statistics (rev 1) ==
|
---|
169 | 0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors
|
---|
170 | 0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion
|
---|
171 | 0x04 0x018 4 0 --- Physical Element Status Changed
|
---|
172 | 0x04 0x1f8 7 - NDC+ Unknown
|
---|
173 | 0x05 ===== = = === == Temperature Statistics (rev 1) ==
|
---|
174 | 0x05 0x008 1 23 --- Current Temperature
|
---|
175 | 0x05 0x020 1 0 --- Highest Temperature
|
---|
176 | 0x05 0x028 1 0 --- Lowest Temperature
|
---|
177 | 0x05 0x038 1 0 --- Lowest Average Short Term Temperature
|
---|
178 | 0x05 0x058 1 70 --- Specified Maximum Operating Temperature
|
---|
179 | 0x05 0x1f8 7 0 -DC+ Unknown
|
---|
180 | 0x06 ===== = = === == Transport Statistics (rev 1) ==
|
---|
181 | 0x06 0x008 4 0 --- Number of Hardware Resets
|
---|
182 | 0x06 0x018 4 0 --- Number of Interface CRC Errors
|
---|
183 | 0x07 ===== = = === == Solid State Device Statistics (rev 1) ==
|
---|
184 | 0x07 0x008 1 0 --- Percentage Used Endurance Indicator
|
---|
185 | |||_ C monitored condition met
|
---|
186 | ||__ D supports DSN
|
---|
187 | |___ N normalized value
|
---|
188 |
|
---|
189 | Pending Defects log (GP Log 0x0c) not supported
|
---|
190 |
|
---|
191 | SATA Phy Event Counters (GP Log 0x11)
|
---|
192 | ID Size Value Description
|
---|
193 | 0x0001 2 0 Command failed due to ICRC error
|
---|
194 | 0x0002 2 0 R_ERR response for data FIS
|
---|
195 | 0x0003 2 0 R_ERR response for device-to-host data FIS
|
---|
196 | 0x0004 2 0 R_ERR response for host-to-device data FIS
|
---|
197 | 0x0005 2 0 R_ERR response for non-data FIS
|
---|
198 | 0x0006 2 0 R_ERR response for device-to-host non-data FIS
|
---|
199 | 0x0007 2 0 R_ERR response for host-to-device non-data FIS
|
---|
200 | 0x0008 2 0 Device-to-host non-data FIS retries
|
---|
201 | 0x0009 2 2 Transition from drive PhyRdy to drive PhyNRdy
|
---|
202 | 0x000a 2 3 Device-to-host register FISes sent due to a COMRESET
|
---|
203 | 0x000b 2 0 CRC errors within host-to-device FIS
|
---|
204 | 0x000d 2 0 Non-CRC errors within host-to-device FIS
|
---|
205 | 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
|
---|
206 | 0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC
|
---|
207 | 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
|
---|
208 | 0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC
|
---|
209 |
|
---|