| 1 | smartctl 7.4 2023-08-01 r5530 [x86_64-linux-5.15.0-130-generic] (local build)
|
|---|
| 2 | Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org
|
|---|
| 3 |
|
|---|
| 4 | === START OF INFORMATION SECTION ===
|
|---|
| 5 | Device Model: OCZ-VERTEX3.20
|
|---|
| 6 | Firmware Version: 2.60
|
|---|
| 7 | User Capacity: 240,057,409,536 bytes [240 GB]
|
|---|
| 8 | Sector Size: 512 bytes logical/physical
|
|---|
| 9 | Rotation Rate: Solid State Device
|
|---|
| 10 | Form Factor: 2.5 inches
|
|---|
| 11 | TRIM Command: Available
|
|---|
| 12 | Device is: Not in smartctl database 7.3/5625
|
|---|
| 13 | ATA Version is: ATA8-ACS, ACS-2 T13/2015-D revision 3
|
|---|
| 14 | SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)
|
|---|
| 15 | Local Time is: Sat Jan 18 17:30:06 2025 WET
|
|---|
| 16 | SMART support is: Available - device has SMART capability.
|
|---|
| 17 | SMART support is: Enabled
|
|---|
| 18 | AAM feature is: Unavailable
|
|---|
| 19 | APM level is: 254 (maximum performance)
|
|---|
| 20 | Rd look-ahead is: Disabled
|
|---|
| 21 | Write cache is: Enabled
|
|---|
| 22 | DSN feature is: Unavailable
|
|---|
| 23 | ATA Security is: Disabled, NOT FROZEN [SEC1]
|
|---|
| 24 | Wt Cache Reorder: Unavailable
|
|---|
| 25 |
|
|---|
| 26 | === START OF READ SMART DATA SECTION ===
|
|---|
| 27 | SMART overall-health self-assessment test result: PASSED
|
|---|
| 28 |
|
|---|
| 29 | General SMART Values:
|
|---|
| 30 | Offline data collection status: (0x02) Offline data collection activity
|
|---|
| 31 | was completed without error.
|
|---|
| 32 | Auto Offline Data Collection: Disabled.
|
|---|
| 33 | Self-test execution status: ( 0) The previous self-test routine completed
|
|---|
| 34 | without error or no self-test has ever
|
|---|
| 35 | been run.
|
|---|
| 36 | Total time to complete Offline
|
|---|
| 37 | data collection: ( 0) seconds.
|
|---|
| 38 | Offline data collection
|
|---|
| 39 | capabilities: (0x7d) SMART execute Offline immediate.
|
|---|
| 40 | No Auto Offline data collection support.
|
|---|
| 41 | Abort Offline collection upon new
|
|---|
| 42 | command.
|
|---|
| 43 | Offline surface scan supported.
|
|---|
| 44 | Self-test supported.
|
|---|
| 45 | Conveyance Self-test supported.
|
|---|
| 46 | Selective Self-test supported.
|
|---|
| 47 | SMART capabilities: (0x0003) Saves SMART data before entering
|
|---|
| 48 | power-saving mode.
|
|---|
| 49 | Supports SMART auto save timer.
|
|---|
| 50 | Error logging capability: (0x01) Error logging supported.
|
|---|
| 51 | General Purpose Logging supported.
|
|---|
| 52 | Short self-test routine
|
|---|
| 53 | recommended polling time: ( 1) minutes.
|
|---|
| 54 | Extended self-test routine
|
|---|
| 55 | recommended polling time: ( 48) minutes.
|
|---|
| 56 | Conveyance self-test routine
|
|---|
| 57 | recommended polling time: ( 2) minutes.
|
|---|
| 58 | SCT capabilities: (0x0025) SCT Status supported.
|
|---|
| 59 | SCT Data Table supported.
|
|---|
| 60 |
|
|---|
| 61 | SMART Attributes Data Structure revision number: 10
|
|---|
| 62 | Vendor Specific SMART Attributes with Thresholds:
|
|---|
| 63 | ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
|---|
| 64 | 1 Raw_Read_Error_Rate -O--CK 120 120 050 - 0
|
|---|
| 65 | 5 Reallocated_Sector_Ct PO--CK 100 100 003 - 0
|
|---|
| 66 | 9 Power_On_Hours -O--CK 100 100 000 - 1 (209 66 0)
|
|---|
| 67 | 12 Power_Cycle_Count -O--CK 100 100 000 - 11
|
|---|
| 68 | 171 Unknown_Attribute -O-R-- 100 100 000 - 0
|
|---|
| 69 | 172 Unknown_Attribute -O--CK 100 100 000 - 0
|
|---|
| 70 | 174 Unknown_Attribute ----CK 000 000 000 - 7
|
|---|
| 71 | 177 Wear_Leveling_Count ------ 000 000 000 - 0
|
|---|
| 72 | 181 Program_Fail_Cnt_Total -O-R-- 100 100 000 - 0
|
|---|
| 73 | 182 Erase_Fail_Count_Total -O--CK 100 100 000 - 0
|
|---|
| 74 | 187 Reported_Uncorrect -O--C- 100 100 000 - 0
|
|---|
| 75 | 194 Temperature_Celsius -O---K 030 030 000 - 30 (Min/Max 30/30)
|
|---|
| 76 | 195 Hardware_ECC_Recovered --SRC- 120 120 000 - 0
|
|---|
| 77 | 196 Reallocated_Event_Count PO--CK 100 100 003 - 0
|
|---|
| 78 | 201 Unknown_SSD_Attribute --SRC- 120 120 000 - 0
|
|---|
| 79 | 204 Soft_ECC_Correction --SRC- 120 120 000 - 0
|
|---|
| 80 | 230 Unknown_SSD_Attribute PO--C- 100 100 000 - 100
|
|---|
| 81 | 231 Unknown_SSD_Attribute PO--C- 100 100 010 - 12884901888
|
|---|
| 82 | 233 Media_Wearout_Indicator -O--CK 000 000 000 - 3
|
|---|
| 83 | 234 Unknown_Attribute -O--CK 000 000 000 - 11
|
|---|
| 84 | 241 Total_LBAs_Written -O--CK 000 000 000 - 11
|
|---|
| 85 | 242 Total_LBAs_Read -O--CK 000 000 000 - 1
|
|---|
| 86 | ||||||_ K auto-keep
|
|---|
| 87 | |||||__ C event count
|
|---|
| 88 | ||||___ R error rate
|
|---|
| 89 | |||____ S speed/performance
|
|---|
| 90 | ||_____ O updated online
|
|---|
| 91 | |______ P prefailure warning
|
|---|
| 92 |
|
|---|
| 93 | General Purpose Log Directory Version 1
|
|---|
| 94 | SMART Log Directory Version 1 [multi-sector log support]
|
|---|
| 95 | Address Access R/W Size Description
|
|---|
| 96 | 0x00 GPL,SL R/O 1 Log Directory
|
|---|
| 97 | 0x04 GPL,SL R/O 6 Device Statistics log
|
|---|
| 98 | 0x06 SL R/O 1 SMART self-test log
|
|---|
| 99 | 0x07 GPL R/O 1 Extended self-test log
|
|---|
| 100 | 0x09 SL R/W 1 Selective self-test log
|
|---|
| 101 | 0x10 GPL R/O 1 NCQ Command Error log
|
|---|
| 102 | 0x11 GPL R/O 1 SATA Phy Event Counters log
|
|---|
| 103 | 0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
|---|
| 104 | 0xb7 GPL,SL VS 16 Device vendor specific log
|
|---|
| 105 | 0xe0 GPL,SL R/W 1 SCT Command/Status
|
|---|
| 106 | 0xe1 GPL,SL R/W 1 SCT Data Transfer
|
|---|
| 107 |
|
|---|
| 108 | SMART Extended Comprehensive Error Log (GP Log 0x03) not supported
|
|---|
| 109 |
|
|---|
| 110 | SMART Error Log not supported
|
|---|
| 111 |
|
|---|
| 112 | SMART Extended Self-test Log Version: 1 (1 sectors)
|
|---|
| 113 | Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
|
|---|
| 114 | # 1 Short offline Completed without error 00% 1 -
|
|---|
| 115 |
|
|---|
| 116 | SMART Selective self-test log data structure revision number 0
|
|---|
| 117 | Note: revision number not 1 implies that no selective self-test has ever been run
|
|---|
| 118 | SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
|---|
| 119 | 1 0 0 Not_testing
|
|---|
| 120 | 2 0 0 Not_testing
|
|---|
| 121 | 3 0 0 Not_testing
|
|---|
| 122 | 4 0 0 Not_testing
|
|---|
| 123 | 5 0 0 Not_testing
|
|---|
| 124 | Selective self-test flags (0x0):
|
|---|
| 125 | After scanning selected spans, do NOT read-scan remainder of disk.
|
|---|
| 126 | If Selective self-test is pending on power-up, resume after 0 minute delay.
|
|---|
| 127 |
|
|---|
| 128 | SCT Status Version: 3
|
|---|
| 129 | SCT Version (vendor specific): 0 (0x0000)
|
|---|
| 130 | Device State: Active (0)
|
|---|
| 131 | Current Temperature: 30 Celsius
|
|---|
| 132 | Power Cycle Min/Max Temperature: 30/30 Celsius
|
|---|
| 133 | Lifetime Min/Max Temperature: 30/30 Celsius
|
|---|
| 134 | Under/Over Temperature Limit Count: 0/0
|
|---|
| 135 |
|
|---|
| 136 | SCT Temperature History Version: 0 (Unknown, should be 2)
|
|---|
| 137 | Temperature Sampling Period: 1 minute
|
|---|
| 138 | Temperature Logging Interval: 10 minutes
|
|---|
| 139 | Min/Max recommended Temperature: 0/ 0 Celsius
|
|---|
| 140 | Min/Max Temperature Limit: 0/ 0 Celsius
|
|---|
| 141 | Temperature History Size (Index): 0 (10)
|
|---|
| 142 | Temperature History is empty
|
|---|
| 143 |
|
|---|
| 144 | SCT Error Recovery Control command not supported
|
|---|
| 145 |
|
|---|
| 146 | Device Statistics (GP Log 0x04)
|
|---|
| 147 | Page Offset Size Value Flags Description
|
|---|
| 148 | 0x01 ===== = = === == General Statistics (rev 2) ==
|
|---|
| 149 | 0x01 0x008 4 11 --- Lifetime Power-On Resets
|
|---|
| 150 | 0x01 0x010 4 1 --- Power-on Hours
|
|---|
| 151 | 0x01 0x018 6 24552377 --- Logical Sectors Written
|
|---|
| 152 | 0x01 0x028 6 3039275 --- Logical Sectors Read
|
|---|
| 153 | 0x04 ===== = = === == General Errors Statistics (rev 1) ==
|
|---|
| 154 | 0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors
|
|---|
| 155 | 0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion
|
|---|
| 156 | 0x05 ===== = = === == Temperature Statistics (rev 1) ==
|
|---|
| 157 | 0x05 0x008 1 30 --- Current Temperature
|
|---|
| 158 | 0x05 0x010 1 - --- Average Short Term Temperature
|
|---|
| 159 | 0x05 0x018 1 - --- Average Long Term Temperature
|
|---|
| 160 | 0x05 0x020 1 - --- Highest Temperature
|
|---|
| 161 | 0x05 0x028 1 - --- Lowest Temperature
|
|---|
| 162 | 0x05 0x030 1 - --- Highest Average Short Term Temperature
|
|---|
| 163 | 0x05 0x038 1 - --- Lowest Average Short Term Temperature
|
|---|
| 164 | 0x05 0x040 1 - --- Highest Average Long Term Temperature
|
|---|
| 165 | 0x05 0x048 1 - --- Lowest Average Long Term Temperature
|
|---|
| 166 | 0x05 0x050 4 0 --- Time in Over-Temperature
|
|---|
| 167 | 0x05 0x058 1 -1 --- Specified Maximum Operating Temperature
|
|---|
| 168 | 0x05 0x060 4 0 --- Time in Under-Temperature
|
|---|
| 169 | 0x05 0x068 1 -1 --- Specified Minimum Operating Temperature
|
|---|
| 170 | 0x06 ===== = = === == Transport Statistics (rev 1) ==
|
|---|
| 171 | 0x06 0x008 4 0 --- Number of Hardware Resets
|
|---|
| 172 | 0x06 0x010 4 37 --- Number of ASR Events
|
|---|
| 173 | 0x06 0x018 4 0 --- Number of Interface CRC Errors
|
|---|
| 174 | 0x07 ===== = = === == Solid State Device Statistics (rev 1) ==
|
|---|
| 175 | 0x07 0x008 1 0 --- Percentage Used Endurance Indicator
|
|---|
| 176 | |||_ C monitored condition met
|
|---|
| 177 | ||__ D supports DSN
|
|---|
| 178 | |___ N normalized value
|
|---|
| 179 |
|
|---|
| 180 | Pending Defects log (GP Log 0x0c) not supported
|
|---|
| 181 |
|
|---|
| 182 | SATA Phy Event Counters (GP Log 0x11)
|
|---|
| 183 | ID Size Value Description
|
|---|
| 184 | 0x0001 2 0 Command failed due to ICRC error
|
|---|
| 185 | 0x0003 2 0 R_ERR response for device-to-host data FIS
|
|---|
| 186 | 0x0004 2 0 R_ERR response for host-to-device data FIS
|
|---|
| 187 | 0x0006 2 0 R_ERR response for device-to-host non-data FIS
|
|---|
| 188 | 0x0007 2 0 R_ERR response for host-to-device non-data FIS
|
|---|
| 189 | 0x0008 2 0 Device-to-host non-data FIS retries
|
|---|
| 190 | 0x0009 2 5 Transition from drive PhyRdy to drive PhyNRdy
|
|---|
| 191 | 0x000a 2 6 Device-to-host register FISes sent due to a COMRESET
|
|---|
| 192 | 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
|
|---|
| 193 | 0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC
|
|---|
| 194 | 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
|
|---|
| 195 | 0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC
|
|---|
| 196 | 0x0002 2 0 R_ERR response for data FIS
|
|---|
| 197 | 0x0005 2 0 R_ERR response for non-data FIS
|
|---|
| 198 | 0x000b 2 0 CRC errors within host-to-device FIS
|
|---|
| 199 | 0x000d 2 0 Non-CRC errors within host-to-device FIS
|
|---|
| 200 |
|
|---|
