| 1 | smartctl 7.4 2023-08-01 r5530 [x86_64-linux-6.10.9-zen1-2-zen] (local build)
|
|---|
| 2 | Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org
|
|---|
| 3 |
|
|---|
| 4 | === START OF INFORMATION SECTION ===
|
|---|
| 5 | Device Model: WDC WD20SMRW-59YNDS0
|
|---|
| 6 | Firmware Version: 01.01A01
|
|---|
| 7 | User Capacity: 2,000,365,379,584 bytes [2.00 TB]
|
|---|
| 8 | Sector Sizes: 512 bytes logical, 4096 bytes physical
|
|---|
| 9 | Rotation Rate: 5400 rpm
|
|---|
| 10 | Form Factor: 2.5 inches
|
|---|
| 11 | TRIM Command: Available, deterministic
|
|---|
| 12 | Device is: Not in smartctl database 7.3/5528
|
|---|
| 13 | ATA Version is: ACS-3 T13/2161-D revision 5
|
|---|
| 14 | SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
|
|---|
| 15 | Local Time is: Fri Sep 13 07:08:40 2024 PDT
|
|---|
| 16 | SMART support is: Available - device has SMART capability.
|
|---|
| 17 | SMART support is: Enabled
|
|---|
| 18 | AAM feature is: Unavailable
|
|---|
| 19 | APM level is: 128 (minimum power consumption without standby)
|
|---|
| 20 | Rd look-ahead is: Enabled
|
|---|
| 21 | Write cache is: Enabled
|
|---|
| 22 | DSN feature is: Unavailable
|
|---|
| 23 | ATA Security is: Disabled, NOT FROZEN [SEC1]
|
|---|
| 24 | Wt Cache Reorder: Enabled
|
|---|
| 25 |
|
|---|
| 26 | === START OF READ SMART DATA SECTION ===
|
|---|
| 27 | SMART overall-health self-assessment test result: PASSED
|
|---|
| 28 |
|
|---|
| 29 | General SMART Values:
|
|---|
| 30 | Offline data collection status: (0x00) Offline data collection activity
|
|---|
| 31 | was never started.
|
|---|
| 32 | Auto Offline Data Collection: Disabled.
|
|---|
| 33 | Self-test execution status: ( 0) The previous self-test routine completed
|
|---|
| 34 | without error or no self-test has ever
|
|---|
| 35 | been run.
|
|---|
| 36 | Total time to complete Offline
|
|---|
| 37 | data collection: (22740) seconds.
|
|---|
| 38 | Offline data collection
|
|---|
| 39 | capabilities: (0x51) SMART execute Offline immediate.
|
|---|
| 40 | No Auto Offline data collection support.
|
|---|
| 41 | Suspend Offline collection upon new
|
|---|
| 42 | command.
|
|---|
| 43 | No Offline surface scan supported.
|
|---|
| 44 | Self-test supported.
|
|---|
| 45 | No Conveyance Self-test supported.
|
|---|
| 46 | Selective Self-test supported.
|
|---|
| 47 | SMART capabilities: (0x0003) Saves SMART data before entering
|
|---|
| 48 | power-saving mode.
|
|---|
| 49 | Supports SMART auto save timer.
|
|---|
| 50 | Error logging capability: (0x01) Error logging supported.
|
|---|
| 51 | General Purpose Logging supported.
|
|---|
| 52 | Short self-test routine
|
|---|
| 53 | recommended polling time: ( 2) minutes.
|
|---|
| 54 | Extended self-test routine
|
|---|
| 55 | recommended polling time: ( 366) minutes.
|
|---|
| 56 | SCT capabilities: (0x7035) SCT Status supported.
|
|---|
| 57 | SCT Feature Control supported.
|
|---|
| 58 | SCT Data Table supported.
|
|---|
| 59 |
|
|---|
| 60 | SMART Attributes Data Structure revision number: 16
|
|---|
| 61 | Vendor Specific SMART Attributes with Thresholds:
|
|---|
| 62 | ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
|---|
| 63 | 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0
|
|---|
| 64 | 3 Spin_Up_Time POS--K 195 188 021 - 3225
|
|---|
| 65 | 4 Start_Stop_Count -O--CK 092 092 000 - 8781
|
|---|
| 66 | 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0
|
|---|
| 67 | 7 Seek_Error_Rate -OSR-K 200 200 000 - 0
|
|---|
| 68 | 9 Power_On_Hours -O--CK 087 087 000 - 10034
|
|---|
| 69 | 10 Spin_Retry_Count -O--CK 100 100 000 - 0
|
|---|
| 70 | 11 Calibration_Retry_Count -O--CK 100 100 000 - 0
|
|---|
| 71 | 12 Power_Cycle_Count -O--CK 100 100 000 - 810
|
|---|
| 72 | 192 Power-Off_Retract_Count -O--CK 200 200 000 - 639
|
|---|
| 73 | 193 Load_Cycle_Count -O--CK 143 143 000 - 172048
|
|---|
| 74 | 194 Temperature_Celsius -O---K 115 088 000 - 32
|
|---|
| 75 | 196 Reallocated_Event_Count -O--CK 200 200 000 - 0
|
|---|
| 76 | 197 Current_Pending_Sector -O--CK 200 200 000 - 0
|
|---|
| 77 | 198 Offline_Uncorrectable ----CK 100 253 000 - 0
|
|---|
| 78 | 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0
|
|---|
| 79 | 200 Multi_Zone_Error_Rate ---R-- 100 253 000 - 0
|
|---|
| 80 | ||||||_ K auto-keep
|
|---|
| 81 | |||||__ C event count
|
|---|
| 82 | ||||___ R error rate
|
|---|
| 83 | |||____ S speed/performance
|
|---|
| 84 | ||_____ O updated online
|
|---|
| 85 | |______ P prefailure warning
|
|---|
| 86 |
|
|---|
| 87 | General Purpose Log Directory Version 1
|
|---|
| 88 | SMART Log Directory Version 1 [multi-sector log support]
|
|---|
| 89 | Address Access R/W Size Description
|
|---|
| 90 | 0x00 GPL,SL R/O 1 Log Directory
|
|---|
| 91 | 0x01 SL R/O 1 Summary SMART error log
|
|---|
| 92 | 0x02 SL R/O 5 Comprehensive SMART error log
|
|---|
| 93 | 0x03 GPL R/O 6 Ext. Comprehensive SMART error log
|
|---|
| 94 | 0x06 SL R/O 1 SMART self-test log
|
|---|
| 95 | 0x07 GPL R/O 1 Extended self-test log
|
|---|
| 96 | 0x09 SL R/W 1 Selective self-test log
|
|---|
| 97 | 0x10 GPL R/O 1 NCQ Command Error log
|
|---|
| 98 | 0x11 GPL R/O 1 SATA Phy Event Counters log
|
|---|
| 99 | 0x24 GPL R/O 288 Current Device Internal Status Data log
|
|---|
| 100 | 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
|
|---|
| 101 | 0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
|---|
| 102 | 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log
|
|---|
| 103 | 0xa8-0xb6 GPL,SL VS 1 Device vendor specific log
|
|---|
| 104 | 0xb7 GPL,SL VS 76 Device vendor specific log
|
|---|
| 105 | 0xb9 GPL,SL VS 4 Device vendor specific log
|
|---|
| 106 | 0xbd GPL,SL VS 1 Device vendor specific log
|
|---|
| 107 | 0xc0 GPL,SL VS 1 Device vendor specific log
|
|---|
| 108 | 0xc1 GPL VS 93 Device vendor specific log
|
|---|
| 109 | 0xcf GPL VS 65535 Device vendor specific log
|
|---|
| 110 | 0xe0 GPL,SL R/W 1 SCT Command/Status
|
|---|
| 111 | 0xe1 GPL,SL R/W 1 SCT Data Transfer
|
|---|
| 112 |
|
|---|
| 113 | SMART Extended Comprehensive Error Log Version: 1 (6 sectors)
|
|---|
| 114 | No Errors Logged
|
|---|
| 115 |
|
|---|
| 116 | SMART Extended Self-test Log Version: 1 (1 sectors)
|
|---|
| 117 | No self-tests have been logged. [To run self-tests, use: smartctl -t]
|
|---|
| 118 |
|
|---|
| 119 | SMART Selective self-test log data structure revision number 1
|
|---|
| 120 | SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
|---|
| 121 | 1 0 0 Not_testing
|
|---|
| 122 | 2 0 0 Not_testing
|
|---|
| 123 | 3 0 0 Not_testing
|
|---|
| 124 | 4 0 0 Not_testing
|
|---|
| 125 | 5 0 0 Not_testing
|
|---|
| 126 | Selective self-test flags (0x0):
|
|---|
| 127 | After scanning selected spans, do NOT read-scan remainder of disk.
|
|---|
| 128 | If Selective self-test is pending on power-up, resume after 0 minute delay.
|
|---|
| 129 |
|
|---|
| 130 | SCT Status Version: 3
|
|---|
| 131 | SCT Version (vendor specific): 258 (0x0102)
|
|---|
| 132 | Device State: Active (0)
|
|---|
| 133 | Current Temperature: 32 Celsius
|
|---|
| 134 | Power Cycle Min/Max Temperature: 32/32 Celsius
|
|---|
| 135 | Lifetime Min/Max Temperature: 18/59 Celsius
|
|---|
| 136 | Under/Over Temperature Limit Count: 0/0
|
|---|
| 137 | Vendor specific:
|
|---|
| 138 | 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
|
|---|
| 139 | 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
|
|---|
| 140 |
|
|---|
| 141 | SCT Temperature History Version: 2
|
|---|
| 142 | Temperature Sampling Period: 1 minute
|
|---|
| 143 | Temperature Logging Interval: 1 minute
|
|---|
| 144 | Min/Max recommended Temperature: 0/60 Celsius
|
|---|
| 145 | Min/Max Temperature Limit: -41/85 Celsius
|
|---|
| 146 | Temperature History Size (Index): 128 (20)
|
|---|
| 147 |
|
|---|
| 148 | Index Estimated Time Temperature Celsius
|
|---|
| 149 | 21 2024-09-13 05:01 33 **************
|
|---|
| 150 | 22 2024-09-13 05:02 32 *************
|
|---|
| 151 | ... ..( 15 skipped). .. *************
|
|---|
| 152 | 38 2024-09-13 05:18 32 *************
|
|---|
| 153 | 39 2024-09-13 05:19 31 ************
|
|---|
| 154 | ... ..( 13 skipped). .. ************
|
|---|
| 155 | 53 2024-09-13 05:33 31 ************
|
|---|
| 156 | 54 2024-09-13 05:34 ? -
|
|---|
| 157 | 55 2024-09-13 05:35 31 ************
|
|---|
| 158 | ... ..( 4 skipped). .. ************
|
|---|
| 159 | 60 2024-09-13 05:40 31 ************
|
|---|
| 160 | 61 2024-09-13 05:41 30 ***********
|
|---|
| 161 | ... ..( 23 skipped). .. ***********
|
|---|
| 162 | 85 2024-09-13 06:05 30 ***********
|
|---|
| 163 | 86 2024-09-13 06:06 29 **********
|
|---|
| 164 | 87 2024-09-13 06:07 29 **********
|
|---|
| 165 | 88 2024-09-13 06:08 29 **********
|
|---|
| 166 | 89 2024-09-13 06:09 30 ***********
|
|---|
| 167 | ... ..( 23 skipped). .. ***********
|
|---|
| 168 | 113 2024-09-13 06:33 30 ***********
|
|---|
| 169 | 114 2024-09-13 06:34 29 **********
|
|---|
| 170 | ... ..( 18 skipped). .. **********
|
|---|
| 171 | 5 2024-09-13 06:53 29 **********
|
|---|
| 172 | 6 2024-09-13 06:54 30 ***********
|
|---|
| 173 | ... ..( 5 skipped). .. ***********
|
|---|
| 174 | 12 2024-09-13 07:00 30 ***********
|
|---|
| 175 | 13 2024-09-13 07:01 ? -
|
|---|
| 176 | 14 2024-09-13 07:02 30 ***********
|
|---|
| 177 | 15 2024-09-13 07:03 ? -
|
|---|
| 178 | 16 2024-09-13 07:04 32 *************
|
|---|
| 179 | ... ..( 3 skipped). .. *************
|
|---|
| 180 | 20 2024-09-13 07:08 32 *************
|
|---|
| 181 |
|
|---|
| 182 | SCT Error Recovery Control command not supported
|
|---|
| 183 |
|
|---|
| 184 | Device Statistics (GP/SMART Log 0x04) not supported
|
|---|
| 185 |
|
|---|
| 186 | Pending Defects log (GP Log 0x0c) not supported
|
|---|
| 187 |
|
|---|
| 188 | SATA Phy Event Counters (GP Log 0x11)
|
|---|
| 189 | ID Size Value Description
|
|---|
| 190 | 0x0001 2 0 Command failed due to ICRC error
|
|---|
| 191 | 0x0002 2 0 R_ERR response for data FIS
|
|---|
| 192 | 0x0003 2 0 R_ERR response for device-to-host data FIS
|
|---|
| 193 | 0x0004 2 0 R_ERR response for host-to-device data FIS
|
|---|
| 194 | 0x0005 2 0 R_ERR response for non-data FIS
|
|---|
| 195 | 0x0006 2 0 R_ERR response for device-to-host non-data FIS
|
|---|
| 196 | 0x0007 2 0 R_ERR response for host-to-device non-data FIS
|
|---|
| 197 | 0x0008 2 0 Device-to-host non-data FIS retries
|
|---|
| 198 | 0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy
|
|---|
| 199 | 0x000a 2 1 Device-to-host register FISes sent due to a COMRESET
|
|---|
| 200 | 0x000b 2 0 CRC errors within host-to-device FIS
|
|---|
| 201 | 0x000d 2 0 Non-CRC errors within host-to-device FIS
|
|---|
| 202 | 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
|
|---|
| 203 | 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
|
|---|
| 204 | 0x8000 4 258 Vendor specific
|
|---|
| 205 |
|
|---|
