Ticket #1839: smartctl_x_a_test_SQF-S25C9-960GDCGE.txt

File smartctl_x_a_test_SQF-S25C9-960GDCGE.txt, 9.1 KB (added by Wade Cheng, 2 months ago)
Line 
1smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.15.0-117-generic] (local build)
2Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org
3
4=== START OF INFORMATION SECTION ===
5Device Model: SQF-S25C9-960GDCGE
6Serial Number: AS1220913001000011
7Firmware Version: SCEBH5A0
8User Capacity: 1,073,741,824,000 bytes [1.07 TB]
9Sector Size: 512 bytes logical/physical
10Rotation Rate: Solid State Device
11Form Factor: 2.5 inches
12Device is: Not in smartctl database [for details use: -P showall]
13ATA Version is: ACS-3 (minor revision not indicated)
14SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
15Local Time is: Fri May 23 04:56:07 2194 CST
16SMART support is: Available - device has SMART capability.
17SMART support is: Enabled
18AAM feature is: Unavailable
19APM level is: 254 (maximum performance)
20Rd look-ahead is: Enabled
21Write cache is: Enabled
22DSN feature is: Unavailable
23ATA Security is: Disabled, frozen [SEC2]
24Wt Cache Reorder: Unavailable
25
26=== START OF READ SMART DATA SECTION ===
27SMART overall-health self-assessment test result: PASSED
28
29General SMART Values:
30Offline data collection status: (0x00) Offline data collection activity
31 was never started.
32 Auto Offline Data Collection: Disabled.
33Self-test execution status: ( 0) The previous self-test routine completed
34 without error or no self-test has ever
35 been run.
36Total time to complete Offline
37data collection: ( 30) seconds.
38Offline data collection
39capabilities: (0x79) SMART execute Offline immediate.
40 No Auto Offline data collection support.
41 Suspend Offline collection upon new
42 command.
43 Offline surface scan supported.
44 Self-test supported.
45 Conveyance Self-test supported.
46 Selective Self-test supported.
47SMART capabilities: (0x0003) Saves SMART data before entering
48 power-saving mode.
49 Supports SMART auto save timer.
50Error logging capability: (0x01) Error logging supported.
51 General Purpose Logging supported.
52Short self-test routine
53recommended polling time: ( 1) minutes.
54Extended self-test routine
55recommended polling time: ( 2) minutes.
56Conveyance self-test routine
57recommended polling time: ( 3) minutes.
58
59SMART Attributes Data Structure revision number: 16
60Vendor Specific SMART Attributes with Thresholds:
61ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
62 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0
63 9 Power_On_Hours -O--C- 100 100 000 - 127
64 12 Power_Cycle_Count -O--C- 100 100 000 - 180
65 14 Unknown_Attribute -O--C- 100 100 000 - 2250457776
66 15 Unknown_Attribute -O--C- 100 100 000 - 2097152000
67 16 Unknown_Attribute -O--C- 100 100 000 - 11448
68 17 Unknown_Attribute -O--C- 100 100 000 - 11448
69100 Unknown_Attribute -O--C- 100 100 000 - 26748
70168 Unknown_Attribute -O--C- 100 100 000 - 6
71170 Unknown_Attribute PO---- 100 100 000 - 230
72173 Unknown_Attribute -O--C- 100 100 000 - 2
73174 Unknown_Attribute -O--C- 100 100 000 - 41
74175 Program_Fail_Count_Chip -O--C- 100 100 000 - 2686976
75192 Power-Off_Retract_Count -O--C- 100 100 000 - 41
76194 Temperature_Celsius PO---K 093 088 000 - 34 (Min/Max 21/39)
77202 Unknown_SSD_Attribute -O--C- 100 100 050 - 0
78218 Unknown_Attribute PO-R-- 100 100 050 - 6
79231 Temperature_Celsius PO--C- 100 100 000 - 100
80234 Unknown_Attribute PO-R-- 100 100 000 - 558189568
81235 Unknown_Attribute PO-R-- 100 100 000 - 125222400
82241 Total_LBAs_Written -O--C- 100 100 000 - 115851868
83242 Total_LBAs_Read -O--C- 100 100 000 - 471505298
84 ||||||_ K auto-keep
85 |||||__ C event count
86 ||||___ R error rate
87 |||____ S speed/performance
88 ||_____ O updated online
89 |______ P prefailure warning
90
91General Purpose Log Directory Version 1
92SMART Log Directory Version 1 [multi-sector log support]
93Address Access R/W Size Description
940x00 GPL,SL R/O 1 Log Directory
950x01 SL R/O 1 Summary SMART error log
960x02 SL R/O 51 Comprehensive SMART error log
970x03 GPL R/O 64 Ext. Comprehensive SMART error log
980x04 GPL,SL R/O 8 Device Statistics log
990x06 SL R/O 1 SMART self-test log
1000x07 GPL R/O 1 Extended self-test log
1010x09 SL R/W 1 Selective self-test log
1020x10 GPL R/O 1 NCQ Command Error log
1030x11 GPL R/O 1 SATA Phy Event Counters log
1040x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
1050x80-0x9f GPL,SL R/W 16 Host vendor specific log
1060xc1-0xcb GPL VS 32760 Device vendor specific log
1070xdf GPL VS 32760 Device vendor specific log
108
109SMART Extended Comprehensive Error Log Version: 1 (64 sectors)
110No Errors Logged
111
112SMART Error Log Version: 1
113No Errors Logged
114
115SMART Extended Self-test Log Version: 1 (1 sectors)
116No self-tests have been logged. [To run self-tests, use: smartctl -t]
117
118SMART Self-test log structure revision number 1
119No self-tests have been logged. [To run self-tests, use: smartctl -t]
120
121SMART Selective self-test log data structure revision number 1
122 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
123 1 0 0 Not_testing
124 2 0 0 Not_testing
125 3 0 0 Not_testing
126 4 0 0 Not_testing
127 5 0 0 Not_testing
128Selective self-test flags (0x0):
129 After scanning selected spans, do NOT read-scan remainder of disk.
130If Selective self-test is pending on power-up, resume after 0 minute delay.
131
132SCT Commands not supported
133
134Device Statistics (GP Log 0x04)
135Page Offset Size Value Flags Description
1360x01 ===== = = === == General Statistics (rev 1) ==
1370x01 0x008 4 180 --- Lifetime Power-On Resets
1380x01 0x010 4 127 --- Power-on Hours
1390x01 0x018 6 115851868 --- Logical Sectors Written
1400x01 0x020 6 1706997 --- Number of Write Commands
1410x01 0x028 6 471505298 --- Logical Sectors Read
1420x01 0x030 6 6486346 --- Number of Read Commands
1430x01 0x038 6 459812586 --- Date and Time TimeStamp
1440x04 ===== = = === == General Errors Statistics (rev 1) ==
1450x04 0x008 4 0 --- Number of Reported Uncorrectable Errors
1460x04 0x010 4 12 --- Resets Between Cmd Acceptance and Completion
1470x05 ===== = = === == Temperature Statistics (rev 1) ==
1480x05 0x008 1 34 --- Current Temperature
1490x05 0x010 1 32 --- Average Short Term Temperature
1500x05 0x018 1 - --- Average Long Term Temperature
1510x05 0x020 1 39 --- Highest Temperature
1520x05 0x028 1 21 --- Lowest Temperature
1530x05 0x030 1 35 --- Highest Average Short Term Temperature
1540x05 0x038 1 31 --- Lowest Average Short Term Temperature
1550x05 0x040 1 - --- Highest Average Long Term Temperature
1560x05 0x048 1 - --- Lowest Average Long Term Temperature
1570x05 0x050 4 0 --- Time in Over-Temperature
1580x05 0x058 1 70 --- Specified Maximum Operating Temperature
1590x05 0x060 4 0 --- Time in Under-Temperature
1600x05 0x068 1 0 --- Specified Minimum Operating Temperature
1610x06 ===== = = === == Transport Statistics (rev 1) ==
1620x06 0x008 4 309 --- Number of Hardware Resets
1630x06 0x018 4 6 --- Number of Interface CRC Errors
1640x07 ===== = = === == Solid State Device Statistics (rev 1) ==
1650x07 0x008 1 0 --- Percentage Used Endurance Indicator
166 |||_ C monitored condition met
167 ||__ D supports DSN
168 |___ N normalized value
169
170Pending Defects log (GP Log 0x0c) not supported
171
172SATA Phy Event Counters (GP Log 0x11)
173ID Size Value Description
1740x0001 2 0 Command failed due to ICRC error
1750x0003 2 0 R_ERR response for device-to-host data FIS
1760x0004 2 0 R_ERR response for host-to-device data FIS
1770x0006 2 0 R_ERR response for device-to-host non-data FIS
1780x0007 2 0 R_ERR response for host-to-device non-data FIS
1790x0008 2 0 Device-to-host non-data FIS retries
1800x0009 4 2 Transition from drive PhyRdy to drive PhyNRdy
1810x000a 4 2 Device-to-host register FISes sent due to a COMRESET
1820x000f 2 0 R_ERR response for host-to-device data FIS, CRC
1830x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC
1840x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
1850x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC
186