1 | root@aaa-C7Z370-CG-L:~# smartctl -a /dev/sdb
|
---|
2 | smartctl 7.2 2020-12-30 r5155 [x86_64-linux-6.5.0-35-generic] (local build)
|
---|
3 | Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
|
---|
4 |
|
---|
5 | === START OF INFORMATION SECTION ===
|
---|
6 | Model Family: Innodisk 3TE7/3IE7/3TO7 SSDs
|
---|
7 | Device Model: M.2 (S42) 3IE7
|
---|
8 | Serial Number: YCA12302140200001
|
---|
9 | LU WWN Device Id: 5 24693e 001125422
|
---|
10 | Firmware Version: S22831i
|
---|
11 | User Capacity: 40,018,599,936 bytes [40.0 GB]
|
---|
12 | Sector Size: 512 bytes logical/physical
|
---|
13 | Rotation Rate: Solid State Device
|
---|
14 | Form Factor: 2.5 inches
|
---|
15 | TRIM Command: Available, deterministic, zeroed
|
---|
16 | Device is: In smartctl database [for details use: -P show]
|
---|
17 | ATA Version is: ACS-2 (minor revision not indicated)
|
---|
18 | SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
|
---|
19 | Local Time is: Mon May 20 15:47:02 2024 CST
|
---|
20 | SMART support is: Available - device has SMART capability.
|
---|
21 | SMART support is: Enabled
|
---|
22 |
|
---|
23 | === START OF READ SMART DATA SECTION ===
|
---|
24 | SMART overall-health self-assessment test result: PASSED
|
---|
25 |
|
---|
26 | General SMART Values:
|
---|
27 | Offline data collection status: (0x00) Offline data collection activity
|
---|
28 | was never started.
|
---|
29 | Auto Offline Data Collection: Disabled.
|
---|
30 | Self-test execution status: ( 0) The previous self-test routine completed
|
---|
31 | without error or no self-test has ever
|
---|
32 | been run.
|
---|
33 | Total time to complete Offline
|
---|
34 | data collection: ( 33) seconds.
|
---|
35 | Offline data collection
|
---|
36 | capabilities: (0x7b) SMART execute Offline immediate.
|
---|
37 | Auto Offline data collection on/off support.
|
---|
38 | Suspend Offline collection upon new
|
---|
39 | command.
|
---|
40 | Offline surface scan supported.
|
---|
41 | Self-test supported.
|
---|
42 | Conveyance Self-test supported.
|
---|
43 | Selective Self-test supported.
|
---|
44 | SMART capabilities: (0x0003) Saves SMART data before entering
|
---|
45 | power-saving mode.
|
---|
46 | Supports SMART auto save timer.
|
---|
47 | Error logging capability: (0x01) Error logging supported.
|
---|
48 | General Purpose Logging supported.
|
---|
49 | Short self-test routine
|
---|
50 | recommended polling time: ( 2) minutes.
|
---|
51 | Extended self-test routine
|
---|
52 | recommended polling time: ( 2) minutes.
|
---|
53 | Conveyance self-test routine
|
---|
54 | recommended polling time: ( 2) minutes.
|
---|
55 | SCT capabilities: (0x0039) SCT Status supported.
|
---|
56 | SCT Error Recovery Control supported.
|
---|
57 | SCT Feature Control supported.
|
---|
58 | SCT Data Table supported.
|
---|
59 |
|
---|
60 | SMART Attributes Data Structure revision number: 16
|
---|
61 | Vendor Specific SMART Attributes with Thresholds:
|
---|
62 | ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
|
---|
63 | 5 Later_Bad_Block 0x0012 100 100 000 Old_age Always - 0
|
---|
64 | 9 Power_On_Hours 0x0012 000 100 000 Old_age Always - 0
|
---|
65 | 12 Drive_Power_Cycle_Count 0x0012 003 000 000 Old_age Always - 3
|
---|
66 | 163 Total_Bad_Block_Count 0x0012 023 000 000 Old_age Always - 23
|
---|
67 | 165 Max_Erase_Count 0x0012 002 000 000 Old_age Always - 2
|
---|
68 | 167 Average_Erase_Count 0x0012 001 000 000 Old_age Always - 1
|
---|
69 | 169 Device_Life 0x0000 100 000 000 Old_age Offline - 100
|
---|
70 | 170 Spare_Block_Count 0x0013 100 100 001 Pre-fail Always - 1159
|
---|
71 | 171 Program_Fail_Count 0x0012 000 100 000 Old_age Always - 0
|
---|
72 | 172 Erase_Fail_Count 0x0012 000 100 000 Old_age Always - 0
|
---|
73 | 192 Unexpected_Power_Loss 0x0012 003 000 000 Old_age Always - 3
|
---|
74 | 194 Temperature 0x0002 029 100 000 Old_age Always - 29 (3 29 0 23 0)
|
---|
75 | 229 Flash_ID 0x0000 100 100 000 Old_age Offline - 110458029227589
|
---|
76 | 235 Later_Bad_Block_Info 0x0002 000 000 000 Old_age Always - 0
|
---|
77 | 241 Total_LBA_Written_32MiB 0x0012 100 100 000 Old_age Always - 0
|
---|
78 | 242 Total_LBA_Read_32MiB 0x0012 100 100 000 Old_age Always - 0
|
---|
79 |
|
---|
80 | SMART Error Log Version: 1
|
---|
81 | No Errors Logged
|
---|
82 |
|
---|
83 | SMART Self-test log structure revision number 1
|
---|
84 | No self-tests have been logged. [To run self-tests, use: smartctl -t]
|
---|
85 |
|
---|
86 | SMART Selective self-test log data structure revision number 1
|
---|
87 | SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
---|
88 | 1 0 0 Not_testing
|
---|
89 | 2 0 0 Not_testing
|
---|
90 | 3 0 0 Not_testing
|
---|
91 | 4 0 0 Not_testing
|
---|
92 | 5 0 0 Not_testing
|
---|
93 | Selective self-test flags (0x0):
|
---|
94 | After scanning selected spans, do NOT read-scan remainder of disk.
|
---|
95 | If Selective self-test is pending on power-up, resume after 0 minute delay.
|
---|
96 |
|
---|
97 | root@aaa-C7Z370-CG-L:~#
|
---|