| 1 | $ smartctl -a /dev/nvme0n1
|
|---|
| 2 |
|
|---|
| 3 |
|
|---|
| 4 | smartctl 7.4 2023-08-01 r5530 [x86_64-linux-6.8.4-3-pve] (local build)
|
|---|
| 5 | Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org
|
|---|
| 6 |
|
|---|
| 7 | === START OF INFORMATION SECTION ===
|
|---|
| 8 | Model Number: Samsung SSD 960 PRO 512GB
|
|---|
| 9 | Serial Number: ***************
|
|---|
| 10 | Firmware Version: 2B6QCXP7
|
|---|
| 11 | PCI Vendor/Subsystem ID: 0x144d
|
|---|
| 12 | IEEE OUI Identifier: 0x002538
|
|---|
| 13 | Total NVM Capacity: 512,110,190,592 [512 GB]
|
|---|
| 14 | Unallocated NVM Capacity: 0
|
|---|
| 15 | Controller ID: 2
|
|---|
| 16 | NVMe Version: 1.2
|
|---|
| 17 | Number of Namespaces: 1
|
|---|
| 18 | Namespace 1 Size/Capacity: 512,110,190,592 [512 GB]
|
|---|
| 19 | Namespace 1 Utilization: 377,907,011,584 [377 GB]
|
|---|
| 20 | Namespace 1 Formatted LBA Size: 512
|
|---|
| 21 | Namespace 1 IEEE EUI-64: 002538 5671b12708
|
|---|
| 22 | Local Time is: Sat May 25 12:16:07 2024 -03
|
|---|
| 23 | Firmware Updates (0x16): 3 Slots, no Reset required
|
|---|
| 24 | Optional Admin Commands (0x0007): Security Format Frmw_DL
|
|---|
| 25 | Optional NVM Commands (0x001f): Comp Wr_Unc DS_Mngmt Wr_Zero Sav/Sel_Feat
|
|---|
| 26 | Log Page Attributes (0x03): S/H_per_NS Cmd_Eff_Lg
|
|---|
| 27 | Maximum Data Transfer Size: 512 Pages
|
|---|
| 28 | Warning Comp. Temp. Threshold: 73 Celsius
|
|---|
| 29 | Critical Comp. Temp. Threshold: 76 Celsius
|
|---|
| 30 |
|
|---|
| 31 | Supported Power States
|
|---|
| 32 | St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat
|
|---|
| 33 | 0 + 6.90W - - 0 0 0 0 0 0
|
|---|
| 34 | 1 + 5.50W - - 1 1 1 1 0 0
|
|---|
| 35 | 2 + 5.10W - - 2 2 2 2 0 0
|
|---|
| 36 | 3 - 0.0500W - - 3 3 3 3 210 1200
|
|---|
| 37 | 4 - 0.0080W - - 4 4 4 4 2000 6000
|
|---|
| 38 |
|
|---|
| 39 | Supported LBA Sizes (NSID 0x1)
|
|---|
| 40 | Id Fmt Data Metadt Rel_Perf
|
|---|
| 41 | 0 + 512 0 0
|
|---|
| 42 |
|
|---|
| 43 | === START OF SMART DATA SECTION ===
|
|---|
| 44 | SMART overall-health self-assessment test result: PASSED
|
|---|
| 45 |
|
|---|
| 46 | SMART/Health Information (NVMe Log 0x02)
|
|---|
| 47 | Critical Warning: 0x00
|
|---|
| 48 | Temperature: 32 Celsius
|
|---|
| 49 | Available Spare: 100%
|
|---|
| 50 | Available Spare Threshold: 10%
|
|---|
| 51 | Percentage Used: 0%
|
|---|
| 52 | Data Units Read: 10,104,857 [5.17 TB]
|
|---|
| 53 | Data Units Written: 4,813,422 [2.46 TB]
|
|---|
| 54 | Host Read Commands: 121,242,029
|
|---|
| 55 | Host Write Commands: 122,017,532
|
|---|
| 56 | Controller Busy Time: 681
|
|---|
| 57 | Power Cycles: 2,421
|
|---|
| 58 | Power On Hours: 7,415
|
|---|
| 59 | Unsafe Shutdowns: 1,024
|
|---|
| 60 | Media and Data Integrity Errors: 0
|
|---|
| 61 | Error Information Log Entries: 4,813
|
|---|
| 62 | Warning Comp. Temperature Time: 0
|
|---|
| 63 | Critical Comp. Temperature Time: 0
|
|---|
| 64 | Temperature Sensor 1: 32 Celsius
|
|---|
| 65 | Temperature Sensor 2: 38 Celsius
|
|---|
| 66 |
|
|---|
| 67 | Error Information (NVMe Log 0x01, 16 of 64 entries)
|
|---|
| 68 | Num ErrCount SQId CmdId Status PELoc LBA NSID VS Message
|
|---|
| 69 | 0 4813 0 0x2010 0x4004 - 0 1 - Invalid Field in Command
|
|---|
| 70 | 1 4812 0 0x0010 0x4004 - 0 0 - Invalid Field in Command
|
|---|
| 71 | 2 4811 0 0x001b 0x421a 0x028 0 0 - Feature Identifier Not Saveable
|
|---|
| 72 | 3 4810 0 0x0012 0x4004 - 0 0 - Invalid Field in Command
|
|---|
| 73 | 4 4809 0 0x3007 0x4004 - 0 1 - Invalid Field in Command
|
|---|
| 74 | 5 4808 0 0x1003 0x4004 - 0 0 - Invalid Field in Command
|
|---|
| 75 | 6 4807 0 0x001b 0x421a 0x028 0 0 - Feature Identifier Not Saveable
|
|---|
| 76 | 7 4806 0 0x0012 0x4004 - 0 0 - Invalid Field in Command
|
|---|
| 77 | 8 4805 0 0x4001 0x4004 - 0 1 - Invalid Field in Command
|
|---|
| 78 | 9 4804 0 0x0018 0x4004 - 0 0 - Invalid Field in Command
|
|---|
| 79 | 10 4803 0 0x001b 0x421a 0x028 0 0 - Feature Identifier Not Saveable
|
|---|
| 80 | 11 4802 0 0x0012 0x4004 - 0 0 - Invalid Field in Command
|
|---|
| 81 | 12 4801 0 0x1007 0x4004 - 0 1 - Invalid Field in Command
|
|---|
| 82 | 13 4800 0 0x0014 0x4004 - 0 0 - Invalid Field in Command
|
|---|
| 83 | 14 4799 0 0x001b 0x421a 0x028 0 0 - Feature Identifier Not Saveable
|
|---|
| 84 | 15 4798 0 0x0012 0x4004 - 0 0 - Invalid Field in Command
|
|---|
| 85 | ... (48 entries not read)
|
|---|
| 86 |
|
|---|
| 87 | Self-tests not supported
|
|---|
| 88 |
|
|---|
