1 | smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.16.0-38-generic] (local build)
|
---|
2 | Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
|
---|
3 |
|
---|
4 | === START OF INFORMATION SECTION ===
|
---|
5 | Device Model: LITEON LCH-256V2S-HP
|
---|
6 | Serial Number: 002524164876
|
---|
7 | LU WWN Device Id: 5 002303 1004f78f0
|
---|
8 | Firmware Version: 2C02
|
---|
9 | User Capacity: 256.060.514.304 bytes [256 GB]
|
---|
10 | Sector Size: 512 bytes logical/physical
|
---|
11 | Rotation Rate: Solid State Device
|
---|
12 | Device is: Not in smartctl database [for details use: -P showall]
|
---|
13 | ATA Version is: ACS-3 (minor revision not indicated)
|
---|
14 | SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
|
---|
15 | Local Time is: Tue Apr 24 16:41:37 2018 CEST
|
---|
16 | SMART support is: Available - device has SMART capability.
|
---|
17 | SMART support is: Enabled
|
---|
18 | AAM feature is: Unavailable
|
---|
19 | APM level is: 254 (maximum performance)
|
---|
20 | Rd look-ahead is: Enabled
|
---|
21 | Write cache is: Enabled
|
---|
22 | ATA Security is: Disabled, frozen [SEC2]
|
---|
23 | Write SCT (Get) XXX Error Recovery Control Command failed: scsi error aborted command
|
---|
24 | Wt Cache Reorder: N/A
|
---|
25 |
|
---|
26 | === START OF READ SMART DATA SECTION ===
|
---|
27 | SMART overall-health self-assessment test result: PASSED
|
---|
28 |
|
---|
29 | General SMART Values:
|
---|
30 | Offline data collection status: (0x03) Offline data collection activity
|
---|
31 | is in progress.
|
---|
32 | Auto Offline Data Collection: Disabled.
|
---|
33 | Self-test execution status: ( 242) Self-test routine in progress...
|
---|
34 | 20% of test remaining.
|
---|
35 | Total time to complete Offline
|
---|
36 | data collection: ( 120) seconds.
|
---|
37 | Offline data collection
|
---|
38 | capabilities: (0x5b) SMART execute Offline immediate.
|
---|
39 | Auto Offline data collection on/off support.
|
---|
40 | Suspend Offline collection upon new
|
---|
41 | command.
|
---|
42 | Offline surface scan supported.
|
---|
43 | Self-test supported.
|
---|
44 | No Conveyance Self-test supported.
|
---|
45 | Selective Self-test supported.
|
---|
46 | SMART capabilities: (0x0003) Saves SMART data before entering
|
---|
47 | power-saving mode.
|
---|
48 | Supports SMART auto save timer.
|
---|
49 | Error logging capability: (0x01) Error logging supported.
|
---|
50 | General Purpose Logging supported.
|
---|
51 | Short self-test routine
|
---|
52 | recommended polling time: ( 2) minutes.
|
---|
53 | Extended self-test routine
|
---|
54 | recommended polling time: ( 14) minutes.
|
---|
55 | SCT capabilities: (0x003d) SCT Status supported.
|
---|
56 | SCT Error Recovery Control supported.
|
---|
57 | SCT Feature Control supported.
|
---|
58 | SCT Data Table supported.
|
---|
59 |
|
---|
60 | SMART Attributes Data Structure revision number: 1
|
---|
61 | Vendor Specific SMART Attributes with Thresholds:
|
---|
62 | ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
---|
63 | 1 Raw_Read_Error_Rate POSR-K 100 100 002 - 0
|
---|
64 | 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0
|
---|
65 | 9 Power_On_Hours -O--CK 100 100 000 - 1923
|
---|
66 | 11 Unknown_SSD_Attribute -O---K 100 100 000 - 0
|
---|
67 | 12 Power_Cycle_Count -O--CK 100 100 000 - 513
|
---|
68 | 170 Unknown_Attribute PO--CK 100 100 005 - 0
|
---|
69 | 171 Unknown_Attribute -O---K 100 100 000 - 0
|
---|
70 | 172 Unknown_Attribute -O--CK 100 100 000 - 0
|
---|
71 | 173 Unknown_Attribute PO--CK 098 098 005 - 141
|
---|
72 | 174 Unknown_Attribute -O--CK 100 100 000 - 38
|
---|
73 | 183 Runtime_Bad_Block -O--CK 100 100 001 - 0
|
---|
74 | 184 End-to-End_Error PO--CK 100 100 097 - 0
|
---|
75 | 187 Reported_Uncorrect -O--CK 100 100 000 - 0
|
---|
76 | 188 Command_Timeout -O--CK 100 100 000 - 0
|
---|
77 | 196 Reallocated_Event_Count -O--CK 100 100 000 - 0
|
---|
78 | 198 Offline_Uncorrectable ----CK 100 100 000 - 0
|
---|
79 | 199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 3
|
---|
80 | 241 Total_LBAs_Written PO---- 100 100 000 - 832692
|
---|
81 | 242 Total_LBAs_Read PO---- 100 100 000 - 645971
|
---|
82 | ||||||_ K auto-keep
|
---|
83 | |||||__ C event count
|
---|
84 | ||||___ R error rate
|
---|
85 | |||____ S speed/performance
|
---|
86 | ||_____ O updated online
|
---|
87 | |______ P prefailure warning
|
---|
88 |
|
---|
89 | General Purpose Log Directory Version 1
|
---|
90 | SMART Log Directory Version 1 [multi-sector log support]
|
---|
91 | Address Access R/W Size Description
|
---|
92 | 0x00 GPL,SL R/O 1 Log Directory
|
---|
93 | 0x01 GPL,SL R/O 1 Summary SMART error log
|
---|
94 | 0x02 GPL,SL R/O 1 Comprehensive SMART error log
|
---|
95 | 0x03 GPL,SL R/O 1 Ext. Comprehensive SMART error log
|
---|
96 | 0x04 GPL,SL R/O 8 Device Statistics log
|
---|
97 | 0x06 GPL,SL R/O 1 SMART self-test log
|
---|
98 | 0x07 GPL,SL R/O 1 Extended self-test log
|
---|
99 | 0x09 GPL,SL R/W 1 Selective self-test log
|
---|
100 | 0x10 GPL,SL R/O 1 NCQ Command Error log
|
---|
101 | 0x11 GPL,SL R/O 1 SATA Phy Event Counters
|
---|
102 | 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
|
---|
103 | 0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
---|
104 | 0xb6 GPL,SL VS 1 Device vendor specific log
|
---|
105 | 0xe0 GPL,SL R/W 1 SCT Command/Status
|
---|
106 | 0xe1 GPL,SL R/W 1 SCT Data Transfer
|
---|
107 |
|
---|
108 | SMART Extended Comprehensive Error Log Version: 1 (1 sectors)
|
---|
109 | No Errors Logged
|
---|
110 |
|
---|
111 | SMART Extended Self-test Log Version: 1 (1 sectors)
|
---|
112 | Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
|
---|
113 | # 1 Short offline Completed without error 00% 1922 -
|
---|
114 | # 2 Short offline Completed without error 00% 0 -
|
---|
115 |
|
---|
116 | SMART Selective self-test log data structure revision number 1
|
---|
117 | SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
---|
118 | 1 0 0 Not_testing
|
---|
119 | 2 0 0 Self_test_in_progress [20% left] (0-65535)
|
---|
120 | 3 0 0 Not_testing
|
---|
121 | 4 0 0 Not_testing
|
---|
122 | 5 0 0 Not_testing
|
---|
123 | Selective self-test flags (0x0):
|
---|
124 | After scanning selected spans, do NOT read-scan remainder of disk.
|
---|
125 | If Selective self-test is pending on power-up, resume after 0 minute delay.
|
---|
126 |
|
---|
127 | SCT Status Version: 3
|
---|
128 | SCT Version (vendor specific): 0 (0x0000)
|
---|
129 | SCT Support Level: 0
|
---|
130 | Device State: Active (0)
|
---|
131 | Current Temperature: 0 Celsius
|
---|
132 | Power Cycle Max Temperature: 0 Celsius
|
---|
133 | Lifetime Max Temperature: 0 Celsius
|
---|
134 | SCT Temperature History Version: 2
|
---|
135 | Temperature Sampling Period: 0 minutes
|
---|
136 | Temperature Logging Interval: 0 minutes
|
---|
137 | Min/Max recommended Temperature: 0/100 Celsius
|
---|
138 | Min/Max Temperature Limit: 0/100 Celsius
|
---|
139 | Temperature History Size (Index): 128 (127)
|
---|
140 |
|
---|
141 | Index Estimated Time Temperature Celsius
|
---|
142 | 0 2018-04-24 14:34 ? -
|
---|
143 | ... ..(126 skipped). .. -
|
---|
144 | 127 2018-04-24 16:41 ? -
|
---|
145 |
|
---|
146 | SCT Error Recovery Control:
|
---|
147 | Read: Disabled
|
---|
148 | Write: Disabled
|
---|
149 |
|
---|
150 | Device Statistics (GP Log 0x04)
|
---|
151 | Page Offset Size Value Description
|
---|
152 | 1 ===== = = == General Statistics (rev 2) ==
|
---|
153 | 1 0x008 4 513 Lifetime Power-On Resets
|
---|
154 | 1 0x010 4 1923 Power-on Hours
|
---|
155 | 1 0x018 6 3031714241 Logical Sectors Written
|
---|
156 | 1 0x020 6 1524022458 Number of Write Commands
|
---|
157 | 1 0x028 6 3679670485 Logical Sectors Read
|
---|
158 | 1 0x030 6 1196804913 Number of Read Commands
|
---|
159 | 2 ===== = = == Free-Fall Statistics (empty) ==
|
---|
160 | 3 ===== = = == Rotating Media Statistics (empty) ==
|
---|
161 | 4 ===== = = == General Errors Statistics (rev 1) ==
|
---|
162 | 4 0x008 4 0 Number of Reported Uncorrectable Errors
|
---|
163 | 4 0x010 4 40 Resets Between Cmd Acceptance and Completion
|
---|
164 | 5 ===== = = == Temperature Statistics (rev 1) ==
|
---|
165 | 5 0x008 1 55 Current Temperature
|
---|
166 | 6 ===== = = == Transport Statistics (rev 1) ==
|
---|
167 | 6 0x008 4 1079 Number of Hardware Resets
|
---|
168 | 6 0x018 4 3 Number of Interface CRC Errors
|
---|
169 | 7 ===== = = == Solid State Device Statistics (rev 1) ==
|
---|
170 | 7 0x008 1 4 Percentage Used Endurance Indicator
|
---|
171 |
|
---|
172 | SATA Phy Event Counters (GP Log 0x11)
|
---|
173 | ID Size Value Description
|
---|
174 | 0x0001 2 0 Command failed due to ICRC error
|
---|
175 | 0x0002 2 0 R_ERR response for data FIS
|
---|
176 | 0x0003 2 0 R_ERR response for device-to-host data FIS
|
---|
177 | 0x0004 2 0 R_ERR response for host-to-device data FIS
|
---|
178 | 0x0005 2 0 R_ERR response for non-data FIS
|
---|
179 | 0x0006 2 0 R_ERR response for device-to-host non-data FIS
|
---|
180 | 0x0007 2 0 R_ERR response for host-to-device non-data FIS
|
---|
181 | 0x0008 2 0 Device-to-host non-data FIS retries
|
---|
182 | 0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy
|
---|
183 | 0x000a 2 2 Device-to-host register FISes sent due to a COMRESET
|
---|
184 | 0x000b 2 0 CRC errors within host-to-device FIS
|
---|
185 | 0x000d 2 0 Non-CRC errors within host-to-device FIS
|
---|
186 | 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
|
---|
187 | 0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC
|
---|
188 | 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
|
---|
189 | 0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC
|
---|
190 |
|
---|